The black Yamaha DZR315 is a 3-way powered loudspeaker designed for main/FOH applications. The 2000W Class-D bi-amp powers the 15" woofer, 8" midrange driver, and 2" compression driver, which combine to provide a frequency range of 31 Hz to 20 kHz (-10 dB) with a maximum SPL of 143 dB.

The on-board 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR315 is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multiband compressor that ensures the DZR315's sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers.

The rear panel offers two combo XLR-1/4" inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The Yamaha DZR315 ships with a standard IEC power cord.

For Live Stage, Theatre, DJ Setups    Designed for FOH/Main Applications    LF: 15", MF: 8", and HF: 2"    Max SPL: 143 dB    Frequency Range: 31 Hz to 20 kHz (-10 dB)    Class-D Amplifier: Bi-Amp 2000W    2 x Combo XLR-1/4" Inputs + XLR Thru/Out    Built-In 96 kHz DSP with FIR Filters    D-CONTOUR Multiband Compressor

• 3-way powered loudspeaker
  • HF: 2"
  • MF: 8"
  • LF: 15"
• Ideal for FOH/Main PA
  • Maximum SPL: 143 dB
  • Frequency range (-10 dB): 31 Hz to 20 kHz
• High-power 2000W Class-D amplifier module
• Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
• Optional speaker cover available (SPCVR-DZR315)

• 96 kHz DSP processors help focus the power output of the DZR315 into high-resolution sound with super-low latency
• Yamaha's Advanced FIR-X tuning improves significantly on their proprietary FIR-X tuning technology which utilizes linear phase FIR filters for the crossover network and correct EQ
• Using FIR filters, Yamaha was able to realize very smooth frequency response for remarkable clarity and sound imaging without phase distortion
• Accurate EQ filtering is also provided for pinpoint adjustment to realize ideal clarity and SPL without signal degradation
• An onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and make precise adjustments to PEQ, delay, and routing
• Store up to 8 user presets to save your own parameter adjustments, or use the optimized dedicated factory presets for using DZR and DXS XLF Series in combination
• Users can easily transfer saved settings to a USB flash drive

• D-CONTOUR is an intelligent multiband compressor that ensures your DZR's sound stays consistent and clear no matter how hard you drive them
• By constantly monitoring the output of multiple frequency bands and applying the optimum EQ adjustments for each, even the highest output levels maintain outstanding clarity and musicality
• D-CONTOUR provides settings for the FOH/Main mode, which boosts the lower frequencies to compensate for low end that is typically missing when speakers are used in suspended applications 
• Presets were created by performing countless listening tests with skilled sound engineers to ensure consistent sound with low distortion at any output level

• DSP protection functions for maximum output and component longevity
• Active loudspeakers ensure the combination of transducers and amplifiers are matched and optimized for the best possible performance
• During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
• Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha's  DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability

Related Questions and Answers

Q: 1. Can I use this mixer with my portable Yamaha PAS 500?

A: The EMX5 is a powered mixer similar to the STAGEPAS mixer unit. The EMX5 does feature a line level stereo output that can be connected to the inputs on a unit such as the STAGEPAS 500.

Q: 2. Will it provide 48V phantom power to a plugged-in microphone?

A: The Alto Professional TS408 TrueSonic 4 Series 2000W 8" 2-Way Active Loudspeaker with Bluetooth, does not provide +48v phantom power for condenser microphones. If you use a microphone that requires +48V of phantom power, connect it to an external phantom power supply or mixer, before connecting it to the loudspeaker.

Q: 3. Can this be used with HS80M monitors? I've noticed that this subwoofer has a very different frequency response curve to the now discontinued HS10W subwoofer that was designed for the HS80M monitors.

A: Contacted Yamaha and they assure me that it can be used with HS80M monitors. Frequency response is different as the HS8S can go as low as 22hz (HS10W was 30hz). You just need to adjust the cross over frequency until it best complements the HS80M monitors.

Q: 4. Is there a way to use a Vesa mount with these speakers by themselves or in any combination with the brackets? Would like to attach them to a desk.

A: The following brackets are mane by Yamaha for this monitor• Baton bracket BBS251,• Ceiling bracket BCS251, • Wall bracket BWS251,• Wall bracket / ceiling bracket BWS50.See page 11,12 for instructions on mounting (https://usa.yamaha.com/files/download/other_assets/4/793644/hs8i_en_om_c0.pdf)

Q: 5. Can SOUND delay (milliseconds) be adjusted on the speaker or via the app?

A: The Alto Professional TS410 2000W 10" 2-Way Active Loudspeaker with Bluetooth (BH # ALTS410XUS) features the Alto Mobile App which gives hands-on remote control over Bluetooth levels, speaker use modes, custom EQ and sub size selection. Further, true wireless stereo linking can be configured remotely via the app to save time during setup. Delay is not adjustable.

Q: 6. Can several of these speakers (only 2 or more?) have their settings adjusted via the app? Can the settings be copied across?

A: The manufacturer has not stated how many TS410 2000W 10" 2-Way Active Loudspeaker with Bluetooth can be configured simultaneously via the app.

Q: 7. This shows 137dBSPL I'm assuming that's at 1m.... what's the SPL at 2m, or some other relative distance?

A: For 2 meters away, the SPL at that location will be 131db.

Q: 8. What is the difference between HS8I and HS8?

A: The HSI model has added mounting points to the original HS monitor, and is now compatible with three optional bracket types—wall, ceiling, and baton—adding the flexibility to accommodate a broad range of sonic environments.

Q: 9. Does it come with a power cable?

A: Yes, the Alto Professional TS410 2000W 10" 2-Way Active Loudspeaker with Bluetooth comes with a power cable.

Q: 10. Does this model have crossover templates for the SRM-15 V-Class or vice versa? Or does Mackie have plans for an accompanying SRM V-Class sub? Urgent answer required; I'm planning to buy V-Class 15-inchers and am trying to decide on the right sub. Don't understand why Mackie would put out the V-Class SRM line without a sub or at least specifying which sub it pairs with. Baffling.

A: We do not carry a Mackie Sub in the SRM V class line, but the DRM 18S is tunable and can be made to match the SRM models. There is no built in preset for it,