The versatile Pelican 3415M Right Angle Lightis an intrinsically safe illumination tool for professionals, and it's also a great light to have around the house. The 3415M carries Class I, II, and III Division 1 safety certifications, and offers a a spot mode (186 lumens), a flood mode (177 lumens), and a combined spot/flood mode (336 lumens). It has a magnetized clip, so you can hang the light from your pocket or snap it onto a metal surface, and the head articulates 90°, so you can place the beam right where you need it.

177-Lumen Flood / 186-Lumen Spot    Spot & Flood Together: 336 Lumens    Primary & Secondary White LEDs    Side Push-Button Switch    Durable & Waterproof ABS Housing    90° Articulating Head    Class I, II, III; Division 1 Certified    Built-In Belt Clip with Magnet    Runs on 3 AA Batteries

• Spot beam: 186 lumens

• Flood beam: 177 lumens

• Spot/flood setting: 336 lumens

• Runtimes: 6-14 hours

• Spot and flood white LEDs

• Side push button

• Click once for spot/flood, twice for flood, three times for spot

• Intrinsically safe with Class I, II, and II Division I safety certification
• Integrated clip with magnet
• Head tilts 90°
• IPX8-rated water resistant, submersible to 3.3'
• ABS plastic housing, polycarbonate lens
• Runs on three AA batteries

Related Questions and Answers

Q: 1. If the red light on the charger stays red when I put the flashlight into the charger, is it not charging?

A: Yes, reseating the battery usually helps.

Q: 2. Is the older style 3410 , without the right angle option still available?

A: Unfortunately, this is only version being offered at this time.

Q: 3. What are the dimensions?

A: I don't have a ruler handy but it looks about about an inch wide and 1 1/4 inch in length from the elbow.

Q: 4. how long is the arm and how long the riser piece?

A: The long part of the Kupo Snap-In Right Angle Pin is approximately 6 inches (14.84 cm) in length, while the shorter 90 riser is approximately 3.6 inches (9.2 cm) in length.

Q: 5. Is this adapter HDMI 2.0+? Or in other words, can it do 4k60p? I want to use it with my Ninja V and GH5 with the highest settings. If not, any recommendations? Thanks!

A: This adapter is not listed as HDMI 2.0, nor do we have any other adapters like it that are. Our only option at this time would be to use an HDMI 2.0 rated cable, we do not have right angle adapters that will work currently.

Q: 6. Are the two 1/4 holes threaded for 1/4-20?

A: Yes they are both threaded to accept 1/4 -20 threaded studs.

Q: 7. Does the Pelican 3415M Right Angle Light Gen 2 have a magnet attached?

A: Yes, the Pelican 3415M Right Angle Light Gen 2 (Bright Yellow), B&H # PE3415MRABYL, has an attached clip with an integrated heavy-duty magnet.

Q: 8. Does anybody know of a shorter one? I'd like one on my stabilizer rig, and I'm trying to minimize the amount of cables that just hang freely or are bunched up. I need two of these units - one on the Shogun 7 & one on the Tascam.

A: I am sorry but that is the length Tentacle offers.

Q: 9. I'm trying to attach this to a canon macro MP-E 65 mm lens. Do you know which adapter I should get?

A: You would need a step down ring such as this: https://bhpho.to/2PCnU4x But when using a step down ring, you risk vignetting the image. Plus the quality of the Bower VL152 52mm Right Angle Mirror Lens Attachment is not nearly as good as the quality of your Canon lens. If at all possible, I would recommend not using a right angle attachment due to the low quality.

Q: 10. Whats the load capacity?

A: The manufactures in general do not list the support weight. The estimate is around 15-20 lbs. But they all recommend using a safety cable. This is a link to some of them, https://bhpho.to/3xKi5bo .