Neutrik 1/4" Trs To Xlr Male Balanced Cable 2'

Product Code: eq61711
Availability: In Stock

$83.85 $109.84

Qty

8 reviews Write a review

Description
Reviews (8)

Designed for studio applications that require a balanced cable, the 2' Neutrik 1/4" TRS to XLR Male Balanced Cable 2'features hand-soldered Neutrik connectors on both ends and uses Rapco's standard MIC1 wire. The cable is made to provide a quiet, rugged, reliable connection every time.

Hand-Soldered Neutrik Connectors Rugged Connection and Quiet Performance

Parameters
Connector 1	1x 1/4" TRS Male Straight
Connector 2	1x XLR 3-Pin Male Straight
Cable Length	2' / 0.6 m
Connector Brand	Neutrik
Jacket Type	Polyvinyl Chloride (PVC)
Wire Gauge	24 AWG
Shielded	Yes
Color	Black

24 AWG Conductor

Bare Annealed Copper Serve Shield

95% Shield Coverage

Matte PVC jacket

0.23" Outside Diameter

Capacitance: 1 pF/ft at 1 kHz

Conductor to Shield Capacitance: 37 pF/ft at 1 kHz

Impedance: 70 Ohms

DC Resistance at 68°F: 23 Ohms / 1000 ft

Related Questions and Answers

Q: 1. Can I use the VXLR Pro to connect a Roland CS-10EM Binaural Mic to XLR connectors capable of supplying phantom power?

A: Yes you can use the Roland CS-10EM with the Rode VXLR Pro.

Q: 2. Will it work with my Rode Rodelink filmmaker kit and my Zoom H6?

A: Yes it. will.

Q: 3. I need to connect a Rode Go ll to a mixer board. What do I need cables or adapters

A: You can use a standard cable with 3.5mm TRS male and XLR male connectors such as the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable - 1.5' (B&H # KORSMXM015) to connect the Rode Wireless GO II Receiver to the input on a mixer. Another option is to use an XLR adapter with the 3.5mm TRS cable that is included with the Wireless GO II System. For the XLR adapter, you can use the Rode VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR).

Q: 4. Hello all, i need 18 of cable THEN the connectors length on top of that so total length would be 18 (cable) plus length of connectors? SO since the specs do not have a drawing i must spew a question - thank you -Rollo (canare wire neutrik XLR female to TRS gold

A: The total length is 18 - end to end.

Q: 5. How does this differ from the VXLR+?

A: Both the VXLR+ and VXLR Pro are 3.5mm TRS female to XLR male adapters with a phantom power converter that can convert 12 to 48V phantom power down to 3 to 5V plug-in power. The VXLR Pro differs from the VXLR+ because it also provides a transformer-balanced output which preserves the signal quality and prevents it from degrading when using a long cable run.

Q: 6. Does this work for recording line-in to a zoom h4n recorder?

A: Yes it should,

Q: 7. Am I correct, when assuming that one could use a y-splitter and 2 of these to “symmetrize” the Sound Devices Mixpre 3/6 unbalanced trs outputs?

A: No, the VXLR Pro is not intended for use with a line level audio signal. It is intended for use with a microphone that has a 3.5mm TRS connector that requires plug-in power and enables connection to an XLR mic input that supplies phantom power and it will convert phantom power to plug-in power. It would certainly help to have more information about what type of device or input you will be connecting the line output from the MixPre-3 or 6 to. Since you are sending line level audio from a single 3.5mm TRS output and want to split it to two balanced XLR male connections, it sounds like what you need is a direct box like the Kopul SDI-PPC Stereo Multimedia Passive Direct Box (B&H # KOSDIPPC). This direct box has a stereo 3.5mm input and will allow you to split the output from the MixPre-3 or 6 to left and right balanced XLR outputs. Please contact us by phone or through live chat on the website if you would like further assistance.

Q: 8. Does this pull one channel, or take both? I believe you need an extra resistor in there to take both channels. Thanks!

A: Most adaptors of this sort will take two channels from the 3.5 stereo end and mono it out (combine to 1 channel) into the Xlr end.

Q: 9. Will this work with my Zoom H5 and Saramonic WM2100 Lav mics?

A: Yes, the Rode VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter can be used to make a hardwired connection between the lavalier microphones included in the Saramonic SR-WM2100 2-Person Camera-Mount Digital Wireless Omni Lavalier Microphone System and the Zoom H5 Portable Handy Recorder. The VXLR Pro will properly convert phantom power from the H5's XLR inputs down to the plug-in power voltage required by the lavaliers.

Q: 10. Will this work to connect a Deity V.Lav mic to the XLR input on a Zoom H6?

A: Yes it wll.

Belisario	07/07/2024
[24 AWG] Well made product 5

anyonymous	22/06/2024
[Black] Though they might look pricey, they are well worth the money. Very sturdy high quality cables and lifetime warranty have me covered in case anything does go wrong, which i doubt. 5

Thom	27/05/2024
[Yes] These cables are awesome, well-built, and sound amazing. They are the only cables I buy now. I highly suggest Mogami. 5

Kenneth	24/05/2024
[24 AWG] I bought a pair of 8030s and was tempted to go for a lower priced cable. But then i thought, after purchasing such a nice pair of monitors, why cheap out on the cable? Snug fit, quiet, and great sound! 5

anyonymous	14/05/2024
[24 AWG] This product does exactly what it's supposed to - and it's Mogami so you know you have the lifetime warranty on it. Why even leave it open to question with some low or mid tier cables? Just fork over some extra bucks for something you know is world-class...you won't be disappointed with these. 5

anyonymous	06/05/2024
[Neutrik] I use these with my Adam A8X monitors. Great performance. Great Sound. 5

Renaldo	13/04/2024
[Yes] I use MOGAMI cables over my Console, interface and my Adam Audio A7X. Nothing else. 5

Eugene	02/04/2024
[2' / 0.6 m] Best speaker cables on the market! A little expensive but well worth it if you want to reduce the noise in your home studio! 5