With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish Zacuto Recoil Pro V2 for Sony FS7 IIfrom Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

VCT Pro Baseplate    FS7 II Trigger Grip    Axis Mini for Sony FS7

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Related Questions and Answers

Q: 1. Is the handle that I see on the picture belong to the camra? I don't see any cable that link it to the camera, is it normal?

A: Yes, the side handle you see in the image provided with the Zacuto Sony FX6 Z-Finder Recoil Pro is included with the Sony FX6 Full-Frame Cinema Camera (Body Only). Although it is not shown in the image, a 13.5" LANC cable is included with the rig to connect the side handle to the camera.

Q: 2. What's in the box?

A: This kit includes the VCT Pro Baseplate, FS7 Trigger Grip, LANC Extension Cable and Axis Mini for FS7.

Q: 3. is this viewfinder have all the same touchscreen features as the sony viewfinder?

A: This is just a z-finder you are not able to drive the Sony menu with the following item.

Q: 4. Would this work with the C100 MKI?

A: Yes, the Canon C200 Recoil Pro V2 is compatible with the Canon EOS C100 Digital Cinema Camera.

Q: 5. Does this unit use the FX6 lcd screen? Or a Zacuto evf?

A: it uses the sony LCD screen

Q: 6. Is there a version of this with 2 handles?

A: There is the Zacuto Gratical Eye Bundle for C500 Mark II with Dual Grips: https://www.bhphotovideo.com/c/product/1527832-REG/zacuto_z_c500_gre_2dg_c500_mark_ii_with.html

Q: 7. What viewfinders can you use with the Axis Mini EVF Mount?

A: The Zacuto Axis Mini EVF mount is designed to work with Zacuto EVF models like https://bhpho.to/396pLfw

Q: 8. would this work on a sony pxw-z280?

A: No, the Zacuto Z-Finder for Sony FS7, FS7 II & FX9, is designed to replace the viewfinder piece on the FS7 and FX9 models, and snaps in place like those pieces. Since the Sony PXW-Z280 does not have a monitor attachment like those models, it would not be recommended to use this Z-Finder with it.

Q: 9. Is this compatible with the Zacuto Sony FX9 Recoil?

A: The Zacuto Z-Finder for Sony FX9 attaches to the camera's monitor. It will work with the Zactuo Recoil Rigs.

Q: 10. Can this be adapted to work with the FS-7?

A: Yes, the included Zacuto LANC Extension Cable (13.8") is compatible with the Sony FS7.