The Wooden Camera RED DSMC2 Accessory Kit Pro 15mm Studioattaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4"-20 mounting holes along the edges and top, as well as two 3/8"-16 threaded holes and 4 x 3/8"-16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8"-16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera's top fans to pass without obstruction.

For DSMC2 BRAINS, WEAPON & RAVEN    Pass-Through Top Plate, Easy Riser Plate    15mm Studio Bridge Plate & 12" Rods    A-Box, Trigger Handle, 12" Dovetail    Ultra Arm Monitor Mount

Related Questions and Answers

Q: 1. Can the Top Handle, Arca-Swiss Mount be mounted on top of the RED Komodo Outrigger Handle?

A: Unfortunately, we have not been able to test these products together, as neither are available in our warehouses as of this writing, and specifications do not explicitly define this pairing.

Q: 2. Is this one compatible with DMSC1 cameras?

A: This is compatible with DMSC2 cameras, it is not designed for DMSC 1 bodies.. For orignal DMSC options you may want to consider the RED DIGITAL CINEMA DSMC Modular Assault Plate Pack, B&H # RE7900224, instead. https://bhpho.to/2WpKW1h

Q: 3. Any way to secure the Canon Speedbooser 0.71x with the lens support bracket and the base plate?

A: You will need to use the Wooden Camera Lens Adapter Support Posts for Unified DSLR Cage. Small, Medium, Large https://www.bhphotovideo.com/c/product/1349148-REG/wooden_camera_900136_unified_dslr_cage_lens.html XL https://www.bhphotovideo.com/c/product/1632123-REG/wooden_camera_900233_xl_support_rod.html

Q: 4. Is this compatible with the Ronin DJI RS2 extended baseplate from SmallRig?

A: The Wooden Camera 15mm LWS Baseplate for RED KOMODO bottom could connect to the DJI RS2 lower plate. Please note that the top camera plate is Arca Swiss and could work with the Smaller Upper quick release on the DJI RS2.

Q: 5. Will the top mount for the handle and accessory work with the Red Outrigger handle?

A: Unfortunately not, neither allow for mounting of the other.

Q: 6. Can this be used with a RED dragon x placing it on the easy riser adaptor to mount on the 15mm rods a matte box and follow focus at the correct height?

A: No. This product does not provide clearance for the Dragon fan. Please instead use the original 15mm LW Bracket. WC part number 148100.

Q: 7. Does it replace the original Red DSMC2 V-Lock Expander?

A: This battery plate can be used instead of the RED battery module with the RED base expander. You can connect this battery plate directly to the body if you do not wish to have IO ports from the expander module.

Q: 8. The screw position and spacing looks similar to the I/O extender for RED Komodo would it fit?

A: Yes, The Mounting points on the RED KOMODO Expander Module would work with the Wooden Wooden Camera 15mm Dual-Rod Bracket.

Q: 9. Will this work with the Tilta dovetail vase plate?

A: Yes, this is set up to easily attach to the Tilta Standard Lightweight Dovetail Plate.https://bhpho.to/2s2bwQk

Q: 10. Will this work with the Red Gemini?

A: Yes it would work. The RED Gemini should be a DSMC2 body/brain and the Wooden Camera 15V Power Supply for RED supports both DSMC1 and DSMC2 bodies ( Brain)