The LEE Filters 810 Zircon Diffusion 1 Filter Rollfrom LEE Filters 810 Zircon Diffusion 1 Filter Rollcan be used to soften the output of an LED light fixture. This filter is constructed from 180-micron polyester that resists fading from LED light fixtures and is delivered as a 4 x 10' roll.

While in use, the 810 Zircon Diffusion 1 Filter is designed to exhibit a 0.37 density, provide a 1.3-stop value, and transmit light at 43%. It can also be applied close to an LED light fixture to blur the appearance of its individual pixels.

For LED Light Fixtures    Softens Light Output    1.3-Stop Reduction    0.37 Density    43% Light Transmission    Fade Resistant    Can Blur LED Chip Pixels    180-Micron Polyester Construction

Related Questions and Answers

Q: 1. Can I put the LEE Filters in each pocket without other protection (soft clothes or similar) or are the well protected by the inner surface of the pouch?

A: Filters placed inside this pouch would already be well protected since there are individual slots for each filter.

Q: 2. Hello, is the seven5 suitable for DSLR full frame camera such as Nikon D750 ?

A: The maximum size filter thread it can accommodate is 72mm. As long as the lenses you work with are 72mm and smaller you will be fine. In the event you want to filter larger lenses you would need to consider an alternate system.

Q: 3. How does this compare to the Progrey Titan CPL?

A: I'm sorry but B&H does not carry Progrey filters so i cannot comment but I can say that Lee filters are very good and have been used by professionals for many years. Other quality brands include Nisi, Haida, Formatt and H & Y.

Q: 4. can it be used with 10-18mm or a 18-135mm 67mm lens on a canon 7d?

A: The LEE Filters Seven5 Deluxe Kit is designed for use on compact interchangeable lens cameras, such as mirrorless cameras. However, as the LEE Filters Seven5 system has filter rings for lenses between 37mm-72mm (along with a few custom rings for certain mirrorless digital cameras), you may purchase the correct adapter ring for use on your lenses. If you are referring to the Canon EF-S 10-18mm f/4.5-5.6 IS STM Lens and the Canon EF-S 18-135mm f/3.5-5.6 IS Lens (which has a 67mm filter thread), the LEE Filters 67mm Seven5 Adapter Ring, B&H # LEARS567, would be the correct adapter ring for your stated needs.

Q: 5. The product foto and specs make clear that the kit includes lenses and a holder, but no protective cases or storage pouches for protection or transport. A customer foto submitted in the reviews shows protective cases and pouches. Im confused. Does the kit come with protective cases or do I buy these separately?

A: My kit came with a soft blue cloth cover that fits all the filters and folds. Easy to put in camera bag or pocket or whatever. The polarizer did come with a padded case. I did buy an extra filter carrier from B+ W for extra protection. If you are concerned I would buy an extra case. Perhaps call up and see what B H recommends.

Q: 6. will it fit my 82 mm lens?

A: It fits the 150x150 mm bracket. I use it on my Nikon 14-24 lens with a special multi-piece holder that screws around the lens. It works great and the filters are not light leak proof without it. I do not think this shield works with a normal filter holder that screws to the front of a lens because it is designed to fill the gap caused by the 14-24 lens fixed front shield.

Q: 7. Isn't this the #21 orange standard?

A: A #21 orange filter is the standard type. A #22 filter is more like a deep orange.

Q: 8. Will this Lee filter fit in the NiSi 150mm filter holder?

A: Yes, it should fit regardless of which NiSi filter holder system you own. I have both the original filter system that came out before the newest one that has the circular polarizer built into it. As long as its a 150x150 filter, it will work.

Q: 9. Would a LEE Filters Seven5 Filter Holder fit on this adapter ring? (I know it is built for the 85 system)

A: This Lee Adapter Ring is only for the 85 System and would not fit the Seven5 Holder.

Q: 10. What is the filter factor for this filter??? Is any adjustment in exposure required?

A: Lee says there is no filter factor for the Elements Circular Polarizer Filter (72mm). But this filter will block 1 stop of light at the maximum density setting.