Enhance your 4K HDR production workflow with the Leader SB-4024-A 4K/HD Up-Down Converter 3G-SDI Boardfrom Leader. Designed for resolution, format, and color gamut conversion, this converter board is equipped with four BNC inputs & four BNC outputs supporting 3G-SDI Level A/B SQD/2SI & 1.5G-SDI SQD/2SI, and one BNC input & one BNC output supporting 1.5G-SDI & 3G-SDI Level A/B. Also featured are a 12-pin Hirose GPIO and an RJ45 Ethernet port. The converter board can be mounted either on a Sony NXL-FR316 signal processing unit or on a Leader BE-4028 board enclosure.

3G/HD-SDI Up/Down Conversion    ITU-R BT.2020/709 Colorimetry Conversion    HDR/SDR Dynamic Range Conversion    Web Browser Control    Mounts on BE-4028 Board Enclosure

• Motion detection, IP conversion
• Enhance function

• Simultaneous use of 3D LUT and Linear Matrix
• Irregular interval grid format 32 x 32 x 32 grids
• ITU-R BT.2407 Annex 2

• Gain, Offset, Gamma, and Knee adjustment
• Various types of log supported (HLG, PQ, S-Log, Canon Log, V-Log, etc)
• 1D LUT file import

• 3G-SDI Level A/B conversion
• Low-latency bypass mode
• 4K 2SI/SQD conversion
• Input/output audio channel remapping, 5.1 channels to stereo downmix

Multiple boards can be monitored and controlled as a system via optional applications

The board can be controlled via a web browser with access to settings and 1D & 3D LUT import functionality

The SB-4024-A can be also controlled via the WonderLook Pro software, which allows for color correction and LUT creation (corporate software license required)

Related Questions and Answers

Q: 1. Does this allow for a usb out? It shows a usb port but doesn't mention it in the specs

A: The mini-USB port is used only for device control (using Windows-only software) and firmware updates.Google dac-70 manual for more info.

Q: 2. If the unit is receiving a 4k HDMI input, can it convert to 1080 over SDI while simultaneously outputting 4k HDMI out?

A: The SCIENCE IMAGE FLOW 4K 12G-SDI/HDMI Up/Down/Cross Converter can only perform one conversion at a time.

Q: 3. If the unit is receiving a 4k input on HDMI can it convert to 1080 for SDI while also outputting 4k through HDMI out?

A: When using the HDMI input of the SCIENCE IMAGE FLOW 4K 12G-SDI/HDMI Up/Down/Cross Converter converted video would be simultaneously output the converted signal format to both the HDMI and SDI output. It will only process one conversion at a time.

Q: 4. Has anyone used this to input HDMI from PC to an SDI input , on the BMD 1 M/E Switcher? We tried using a Decimator MD-HX and have not had any luck.Thanks!

A: 1st, your Payload: BMD ATEM by default is 1080i / 59.94; Delivery: SMPTE Level B. Your Decimator MD-HX, those are configured by default as Output Converters. Install the Decimator control Panel to configure (Decimator)as an Input Converter. It will do what you want.The DAC-70s are SMPTE Level A. At 1080i / 59.94, they will work as long as the Payload remains 1080i / 59.94. Delivery: SMPTE Level A or B, does not matter at that rate. We use both DAC-70's & Decimators, among other Converters, with our BMD ATEM 2 M/E Production Studio 4K Video Switch. Hope that helps!

Q: 5. what is the weight of this product?

A: less than a pound. Great box to have..

Q: 6. Can it convert a DVI input to HD-SDI using a DVI to HDMI Cable?

A: If you are converting a DVI-D to HDMI, then yes that should be no problem. You will have to also factor in audio. your DVI to HDMI conversion will need to embed the the audio into the HDMI stream.

Q: 7. Anyone know the processing delay? Want to bring a consumer HDMI camera into a 720p system, for IMAG. Thanks in advance for your input.

A: No delay. I have used it for IMAG. SOLID PERFORMANCE.

Q: 8. Eternally grateful for your input... If input VGA at 1024x768 and it is set to output at 1080, will I see pillar boxes and a slight letterbox at the top since it is outputting 1:1 or will it fit to the vertical height? How about for 720? Thanks!!! Steve

A: We are using it similar to what you are describing. If you put VGA in and set output to 1080 it will be full screen. As far as 720, we have not used it yet.Lenny

Q: 9. Dac -70 out put HDMI &SDI simultaneously?

A: Yes it can.

Q: 10. What software and hardware options are included?

A: The Leader LV-5600 Waveform Monitor - SDI and IP Signals provides the hardware option #LV5600-SER01 and currently, for a limited time, software #LV5600-SER26, Leader LV-5600 Customizable Layout Function.