Offering color control, dimming, beam angle, and power options, the FotodioX Pro PopSpot Ultra 50 Bi-Color LED Light Kitfrom FotodioX Pro PopSpot Ultra 50 Bi-Color LED Light Kitis built around a fixture with a focusable lens that offers adjustments from a wide 60° flood beam to a 30° spot for selective lighting or sharp-shadowed sunlight effects. The beam angle can be further tweaked with the included 4-way barndoors that allow you to illuminate areas you want while keeping light from areas that you don't. Color is variable from 3200 to 5600K to match other fixtures, ambient light challenges, or just for creative expression. The light's high CRI/TLCI rating of 95/96 illustrates accuracy in color rendition. Demonstrating economy of power, the Ultra 50 draws just 50W of current while outputting many times that number with negligible heat, allowing you to squeeze it into places where traditional fixtures can't go, or to place it close to the talent without discomfort. The light is dimmable from 10 to 100% and maintains full power throughout the color range.

Powering the Ultra 50 offers more options. The light is ready for worldwide use via the kit's multi-voltage power supply, but it can also run on the two included NP-F750 batteries when mains power is unavailable. The batteries will give you 90 minutes of runtime on a full charge. FotodioX includes a dual battery charger and a bag for storage and transport.

Color Temperature: 3200 to 5600K    Focusing: 30 to 60°    Measures: 4 x 9.6 x 15"    10 to 100% Dimming    Yoke, Four-Way Barndoors    2 NP-F750 Li-Ion Batteries, Charger    100-240 VAC Power Adapter    Carry Case

The PopSpot Ultra 50 Bi-Color is dimmable from 10-100% power and is adjustable from daylight through tungsten color balance at 3200-5600K while maintaining a CRI of 95 and a TLCI rating 96, providing accurate color rendition.

The included 4-way barndoors help you illuminate areas that you want while keeping light from areas that you don't. In addition, the PopSpot Ultra 50 features a Profoto-style accessory mount, allowing you to use your favorite light modifiers such as reflectors, snoots, and softboxes.

Yet another sign of versatility is the PopSpot Ultra's adjustable focus feature. The lens offers you adjustments from a wide 60° flood beam to a 30° spot for selective lighting or sharp-shadowed sunlight effects.

The compact design and negligible heat created by the COB LEDs, allows you to squeeze the PopSpot Ultra 50 into tight places or work up close to your subject without the concern of hazard or discomfort. The PopSpot Ultra also features an integrated PWM circuit to give you get constant, flicker-free light that is great for slow-motion and high frame rate videography.

Often bi-color means half-power, but that's not so with the PopSpot Ultra. The light features one daylight (5600K) balanced 50W COB LED and one 50W tungsten (3200K) balanced COB LED, providing full power throughout the color range.

The PopSpot Ultra 50 can be powered by standard AC current or via batteries making it suitable for studio or location work. Thanks to its multi-voltage power adapter (100-240 VAC), the PopSpot Ultra 50 is ready for worldwide use; all you'll need is an inexpensive travel power adapter.

Related Questions and Answers

Q: 1. Does this reflector accept standard 7" honey comb grids?

A: You should be able to use a 7" grid of choice.

Q: 2. How bright is the light?

A: The photometric output of the FotodioX Pro LED-312DS Bi-Color LED Photo Video Light Kit is 665 lux at the 3200K setting and 765 lux at the 5600K setting.

Q: 3. How long does it take to charge the battery?

A: Unfortunately, FotodioX states that they do not have an estimate on the amount of time it takes to fully charge the two (2) 2200mAH NP-F550 7.4V batteries included in the kit. The only battery information they have is a full charge will provide approximately one (1) hour of power when the light fixture is set at full output, but the battery charge time is not indicated. From an estimate of batteries of similar size, I would estimate it may take approximately 4 hours to charge the battery.

Q: 4. Can the C-308AS be run off AC power only after the batteries have run out of power?

A: Yes, you can run the lights on AC or on Battery. So, if the batteries run out you can switch to the included AC adapter.

Q: 5. Is there an AC Adapter available? 3 Hours is too short for a full shoot day to run on batteries.

A: The kit comes with an AC adapter for the lights so you can plug it in to a wall outlet.

Q: 6. I recently received 2 lighting kits. Is it use the supplied charger/ac adapter to power the light with ac while the batteries are still attached to the light? Thanks.

A: The AC adapter would be plugged in directly to the panel for power through an AC outlet, but it cannot charge the batteries at the same time.

Q: 7. What is the distance from light to subject for the lux ratings?

A: About 3 feet. There is a YouTube video the company put up explaining this product.

Q: 8. Looking at the pictures, is this the 312-DS or just the 312-D? The 312-DS should have a temperature control on the back, but I don't see one in this photo. Additionally, the title says bi-color which sounds like there are two colors, not a range.

A: The picture online does not show the temperature control. However, the light I received does have it. I can set any temperature within the entire range. I have been very happy with it.

Q: 9. Will this reflector work on the Profoto B10?

A: Yes it will

Q: 10. Can I use this reflector on Godox AD400 Pro?

A: This reflector is FotodioX/Profoto Mount, thus it will not fit on the AD400Pro.