Combining the best attributes of point source and line array technologies, the PreSonus CDL12 is a constant directivity loudspeaker well suited for fixed installations and mobile sound reinforcement for live bands, DJs, clubs, event halls, bars, speaking engagements, and more. The CDL12 offers consistent, coherent sound with focused pattern control and consistent SPL throughout the frequency response range.

The 15mm eucalyptus plywood enclosure houses a 2000W Class-D amplifier that powers the single 12" (1000W) woofer and eight 2" hi-mid frequency drivers (1000W), which combine to offer a frequency range (±3 dB) of 48 Hz to 18 kHz with a maximum SPL of 131 dB. With a 420 Hz crossover, the CDL12 minimizes comb filtering between the high-mid drivers and the 12" driver.

Rigging CDL12 enclosures is made easier, thanks to the integrated pin-loaded rigging hardware. A dual-angle pole mount provides support for up to two enclosures, while up to six enclosures can be flown offering a truly symmetric 120 x 120° design. Up to five enclosures can be flown with one or two of the optional CDL18 subwoofers for extended low-frequency response.

Onboard DSP presets help facilitate simplified array configurations, or connect the array via Ethernet to enable WorxControl software for Mac and Windows, which provides compression, limiting, 800 ms of delay, and 8-band EQ with individually selectable filters (HP, LP, BP, Notch, High-Shelf, Low-Shelf, and All Pass). Speakers may be grouped and managed separately or together with remote performance monitoring indicators for temperature and signal levels. Additionally, the locking Ethernet connection allow the amplifier to integrate into Dante network environment. The PreSonus CDL12 ships with a powerCON power cord

ript>

Hybrid Line Array & Point Source    1 x 12" Low-Frequency Woofer    8 x 2" Hi-Mid Drivers    Class-D Amplifier: 2000W    Frequency Range: 48 Hz to 18 kHz    Max SPL: 131 dB    Dispersion: 120 x 20° (H x V)    Dante for Audio and Control    Up to 6 Enclosures per Side    Pole Mount and Rigging Points

• Constant directivity sound reinforcement loudspeaker
• Line array and point source technology
• Class-D amplification
  • Total System Power: 2000W peak, 1000W program (500W RMS)
  • LF Driver Power: 1000W peak, 500W program (250W RMS)
  • HF Driver Power: 1000W peak, 500W program (250W RMS)
• 8 x 2" high-mid frequency drivers
• 1 x 12" woofer with a 2.5" voice coil
• 48 Hz to 18 kHz frequency response (-3 dB)
• 131 dB SPL (max)
• 120 x 20° (horizontal x vertical) dispersion pattern
• Networking: Dante (audio and control), Control (only) (locking Ethernet)
• Mains Connection: powerCON In and Out
• User controls: Preset select, HPF on/off
• Indicators: Over temperature, signal, -3 dB, limiter, clip, network status
• Enclosure: 15 mm eucalyptus plywood
• Mounting:
  • Pole Mount: Dual-position (0 and 10°)
  • Integrated Rigging: (10:1 load)

Related Questions and Answers

Q: 1. What's the size of the DC in millimetres?

A: That is a 2.1 x 5.5mm.

Q: 2. which speaker box is the best for your pastor's sermons?

A: The JBL CBT 100LA-1 could be considered a great choice for sermon audio due to its Constant Beamwidth Technology, which provides consistent dispersion in acoustically complex environments such as churches and cathedrals.

Q: 3. Will this work with a Canon C100?

A: No, please review the following cable that will work Tilta D-Tap to 5.0/3.0mm DC Male Power Cable for Sony FS5 and FS7 https://bhpho.to/3jK6zXy

Q: 4. Will this work with lumix gh6 or gh5s ? Thank you

A: No, LanParte D-Tap to Barrel 8.4V Regulated Constant Power Cable will not work with the GH6 or GH5S. An alternate that would work is the following cable. GH6 Kondor Blue D Tap to DMW-BLK22 Dummy Battery Cable BH # KOKBDTLS5GH5 https://bhpho.to/3S43gsH GH5s GyroVu D-Tap to Panasonic DMC-GH3/GH4/GH5 (DMW-BLF19) Intelligent Dummy Battery (30") BH #GYVDTAPGH4 https://bhpho.to/3dlTMdp

Q: 5. why type of light does FLC 300 use?

A: The Flashlite 320W can use the Smith-Victor C4-12C Flashtube & the Impact ESR Lamp as replacement lamps. Please see the images below for reference.

Q: 6. what size barrel is this?

A: the barrel appears to be 2.5mm but the manufacturer has not provided specific dimensions

Q: 7. Am I understanding this correctly--the PreSonus Studio Channel has a compressor, but does NOT have a Noise Gate? Meaning that noise gets increased in volume as well? Thanks.

A: Correct, there is no noise gate or expander in the Studio Channel. Compressors don't increase level (or noise), they only decrease or limit dynamic range. If you don't have your input gain set correctly, that will decrease your signal-to-noise ratio. If you apply compression to a noisy signal, that noise will seem louder because you've brought the input signal peak and noise floor closer together by compressing the dynamic range of that original signal. Hope that helps!

Q: 8. Does this bag fit StudioLive 16.4.2 as well?

A: No it does not - you would need the larger bag for the 1642:a href= https://www.bhphotovideo.com/c/product/848099-REG/PreSonus_SL_1642_BAG_SL_1642_BAG_FOR_STUDIO_LIVE.html target= _blank https://www.bhphotovideo.com/c/product/848099-REG/PreSonus_SL_1642_BAG_SL_1642_BAG_FOR_STUDIO_LIVE.html/a

Q: 9. What type of cable or connector does it use?

A: This speakre uses bare-wire tap terminals.

Q: 10. What is the maximum current supported by this cable in amps?

A: The standard for DTAP power is 4.1A / 50W when working with the LanParte D-Tap to Barrel 12V Regulated Constant Power Cable (17.7")