Get proper pan balance with very heavy Ronin 2 camera builds with help from this CineMilled Pan Counterweight Mount for DJI Ronin 2from CineMilled. Designed to clamp around the DJI Ronin 2's pan bar, this mount provides 1/4"-20 and 3/8"-16 threaded holes for mounting counterweights, monitors, mount accessories, or a Universal Battery Plate (all available separately). By using the optional Universal Battery Plate, you can screw in V-mount or Gold battery mounts, enabling you to use batteries as counterweights while powering your camera and accessories.

Having the pan axis perfectly balanced is vital on large and/or heavy builds because the pan motor does the most work—especially on vehicle mounts fighting wind blast. You may also want to use the mount on lighter builds to reduce the length of the pan arm. Reducing the pan arm's length increases stiffness, reduces potential vibrations, and puts the gimbal closer to your body when shooting handheld.

For DJI Ronin 2 Stabilizer    Allows for Pan Balance with Heavy Loads    Clamps Around Pan Bar    1/4"-20 and 3/8"-16 Mounting Holes    Mounts Optional CineMilled Weights    Mounts Optional Universal Battery Plate

Related Questions and Answers

Q: 1. Will this work with the Glidecam x-22?

A: Hello there...The best thing to do would be to phone Cinemilled Customer service and ask them if one of their adaptors would fit the X-22 system; it all comes down to whether or not the X-22 armpost fits the Cinemilled adaptor. I have done a fair bit of research on this for my Glidecam X-10 system and subsequently bought the Cinemilled 7/8 armpost adaptor. The 7/8 adaptor is the recommended (by Cinemilled) hardware for the X-10/DJI Ronin combo. If the armpost for Glidecam arms are all the same then you're good to go with the 7/8 however; since the X-22 supports a heavier payload (10-25lbs) than the X-10 (13lbs), it may very well use a larger post and a different size adaptor. Hey, if the forums have nothing so far the manufacturer would know for sure; all I can say is that once you find the right adaptor, it's a very impressive rig...hope this is helpful!

Q: 2. Will this work with the Glide Gear DNA 6000 arm and vest?

A: This combination is unknown but it should work with any 7/8 post. The Glide Gear DNA 6000 is reported to be 7/8 so you should be good.

Q: 3. Hi i have an SK steadicam vest and i want to use it with the cinemilled armpost adapter and i want to know wich hole size i have to choose..!?

A: Unfortunately, neither we or CineMilled have heard of the SK Steadicam vest . We therefore ask you contact the manufacturer and then CineMilled with that information so that the proper adapter can be selected.

Q: 4. What weight is this counter weight?

A: According to CineMilled's website, these are 11.5 oz/326 gm.

Q: 5. does this plate work with the came tv stabilizer? https://a href= http://www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html target= _blank www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html/a

A: No, this is made specifically for the Ronin dovetail.

Q: 6. Just wondering if there are any products similar to this? Allowing to mount a ronin 1 dovetail on top and a tripod baseplate on the bottom.

A: RigWheels make a Ronin Mounting Adapter Plate as well, B&H # RIRAMP. https://bhpho.to/2PUsnyw

Q: 7. Hi I have a Tiffen master series arm and Djı ronin 2 Which size should I take?

A: From what I can gather, this unit will not fit a master series arm.

Q: 8. What are the hole sizes in the Cinemilled armpost adapter plate? I'm wondering if using a male to male 1/4 or 3/8 thread adapter, I could attach a Ronin-S to this plate (i.e., not attach the armpost adapter to a gimbal handle bar but just to the bottom of the Ronin-S).

A: We are not aware of a way for this product to be used with the Ronin-S. One portion connect to a 1/2" post from a Steadicam system, while the other connects to a 30mm Top Bar on the original Ronin.

Q: 9. What are the difference between these and the DJI extension rods for the Ronin M?

A: The extension arms from Cine Milled are 2.5 x 0.5 x o.5 / 6.4 x 1.3 x 1.3 cm and they do not have an end cap.DJI Extends the Vertical Adjustment Arms, located on both sides of the camera base plate, by 30mm.

Q: 10. Will this work with ronin mx?

A: This plate is for the larger, original Ronin and may not work with the Ronin MX. The Ronin MX was only just announced at NAB in Las Vegas so all of the compatibility details are not yet known. Please keep an eye on our website for updates and details as they become available.