The DPA DPA 4099 Rock Touring Kit, 10 Mics for Extreme SPLis an adapter featuring XLR and Microdot connections allowing you to attach a miniature DPA microphone to a preamp, mixer, camera, or similar device able to supply phantom power.

The adapter is functional at 12V, but requires 48V for the connected mic to reach full specifications. The active-signal balanced wiring allows for longer cable runs with less noise—with a common mode rejection ratio (CMRR) that is better than 60 dB in the 50 Hz to 15 kHz range.

This version features a belt clip for added convenience in mobile situations. The belt clip can be removed for direct camera connections if desired.

In Cardboad Box (No Case)    For Close-Miking Most Instruments    CORE Technology Brings More Clarity    10 x Supercardioid Condenser Microphones    Handles High SPLs    High Gain Before Feedback    Flexible and Easy Mounting    Gentle, Easy to Mount on Instrument    Includes Gooseneck Extender    Detachable Cables

Related Questions and Answers

Q: 1. Will it fit Synco D1 ?

A: The Synco Mic-D1 Hypercardioid Shotgun Microphone is too long for use within the Rycote Super-Shield Kit for Shotgun Mics (Medium). The Rycote Super-Shield Kit for Shotgun Mics (Large) (BH #RYSSKL) is the proper choice for use with the Synco Mic-D1: https://bhpho.to/3U26PkT

Q: 2. Would this be the correct model for the Sennheiser MKH 50?

A: The Super-Shield Kit for Shotgun Mics (Small) from Rycote will accommodate several mics including the MKH-50. Rycote also recommends the Modular Windshield WS 2 Kit for a more robust solution.

Q: 3. I would like to remove the handle from this and mount it to a camera cage with a 3/8-16 or 1/4-20 screw. Would that be feasible by threading it through the hole the handle clamp screws through?

A: No problem grippper will attach to your rig as long as you have a 3/8 thread

Q: 4. will the new rode ntg5 fit?

A: Yes, it will fit the NTG-5, and Rycote also make a blimp specifically for that mic: https://www.bhphotovideo.com/c/product/1544185-REG/rycote_010326_super_blimp_windshield_kit_for.html

Q: 5. This comes with some foam gaskets but don't the filters already have these attached? If so, what's the point of including extras.

A: Those are replacement foam gaskets in case the others wear out.

Q: 6. Would these work in a matte box?

A: These filters will fit in a matte box that accepts 100mm filters that are 2mm thick.

Q: 7. How does this blimp compare with the rycote windshield kit 4? Looks like the only real difference is that the the super-shield does not have a real connbox. Need help picking one, thanks!

A: The Rycote Super-Shield Kits are a great cost effective solutions for heavy wind diffusion, but don't offer the same modular customization available on the windshield kits(4).

Q: 8. Would the Audio-Technica bp4025 head fit when mounted with the 5 pin XLR cable?

A: The Rycote Super-Shield Kit for Shotgun Mics would not be recommended for use with microphones as wide as the Audio-Technica BP4025.

Q: 9. If I was looking to mix 5.1 audio for post production, would this be a good solution as the interface between my 5 speakers + sub and my computer (running Adobe Premiere and Audition CC)? Would I need any additional hardware? I'm confused over whether something like this, or something like the Focusrite 18i20 is better for my purposes. Or something else? Again, I'm NOT using this to record audio, but only to mix audio for video post production. While 80% of my mixes will be for stereo output only, a small portion will be for 5.1 surround. Please advise.

A: The 18i20 will work much better.

Q: 10. Would these work on a camera that has been converted for infrared? Mine passes visible light above 590 nm and near infrared light. I do not want to block infrared light any more than visible light.

A: You would need to ask the company that did the IR conversion specifically but Kolari Vision (for example) makes their own IR ND filter so these filters should be fine too.