Genelec 7382ap Sam 15" 2500w Studio Subwoofer Black
- Product Code: eq62854
-
The Genelec 7382AP SAM 15" 2500W Studio Subwoofer Blackis a professional, active subwoofer designed to extend the bass reproduction of active loudspeakers. With flexible calibration and bass-management features, it easily integrates into environments requiring analog or digital interfacing, for sound systems ranging from simple stereo to 40+ channels of immersive audio in large recording studios, film mixing facilities, mastering suites, post-production houses, clubs, or high-end home theaters.
The 7382AP's rugged, wood-fiberboard enclosure houses three, custom-designed 15" long-throw woofers, which deliver high SPL up to 130 dB, with low distortion and minimal power compression. Combined with a laminar-flow, bass-reflex port, the subwoofer provides precise bass articulation at frequencies down to 15 Hz.
Electronics are integrated in the RAM-SW remote amplifier module, individually calibrated to match the supplied subwoofer. The module contains active crossover filters, digital signal processing algorithms, overload protection, and a 2500W, Class-D amplifier. Analog and AES/EBU digital I/O, as well as a separate LFE (Low Frequency Effect) analog input offer a set of flexible connectivity options, which support distributed bass-management technology.
As part of the SAM Series of subwoofers, the 7382AP integrates with the Genelec Loudspeaker Manager (GLM) software (free download available separately), via which it can be calibrated, configured, and controlled to compensate for detrimental room/acoustic anomalies, solve issues of subwoofer placement, and obtain a flat frequency response.
Built to withstand the rigors of professional use, the 7382AP's electronics, drivers, and enclosure were designed, assembled, tested, and individually calibrated in the Genelec factory in Iisalmi, Finland.
For Film, Post, and Music Production Rugged Wood Fiberboard Enclosure 3 x Custom-Designed 15" Woofers 2500W Class-D Remote Amplifier Module Integrates with GLM Calibration Software Frequency Response Down to 15 Hz Maximum SPL of 130 dB Laminar-Flow Bass-Reflex Port Design XLR Analog and AES/EBU I/O Dedicated LFE Input
Key Specs | |
---|---|
Monitor Type & Configuration | Active Subwoofer |
Total Power Output | 2500 W |
Subwoofer Drivers | 3x 15" / 38.1 cm Cone |
Audio I/O | 2x XLR 3-Pin Balanced Input (10 Kilohms) 2x XLR 3-Pin Balanced Output (10 Kilohms) 1x XLR 3-Pin Balanced Input (10 Kilohms) |
Digital Audio I/O | 1x XLR 3-Pin AES3 Input 1x XLR 3-Pin AES3 Output |
Network I/O | 2x RJ45 Ethernet |
Wireless | No |
Parameters | |
Number of Included Monitors | Single Monitor |
Enclosure | Bass-Reflex/Ported, Shielded |
Total Power Output | 2500 W |
Drivers | |
Subwoofer Drivers | 3x 15" / 38.1 cm Cone |
Amplifiers | LF: 2500 W Class-D |
Performance | |
Frequency Response | 15 Hz to 100 Hz ± 6 dB |
Maximum Sound Pressure Level (SPL) | 129 dB |
Total Harmonic Distortion (THD) | 1% |
Maximum Input Level | +24 dB |
Self-Generated Noise | Less Than 5 dBA (at 3' / 1 m) |
EQ | No |
Filters | No |
Parametric EQ | No |
Crossover Frequency | Low-Pass: 100 Hz |
Crossover Type | Active |
Phase Adjustment | No |
Connectivity | |
Audio I/O | 2x XLR 3-Pin Balanced Input (10 Kilohms) 2x XLR 3-Pin Balanced Output (10 Kilohms) 1x XLR 3-Pin Balanced Input (10 Kilohms) |
Digital Audio I/O | 1x XLR 3-Pin AES3 Input 1x XLR 3-Pin AES3 Output |
Network I/O | 2x RJ45 Ethernet |
USB | No |
Wireless | No |
Power | |
AC Input Power | 100 to 240 VAC, 50/60 Hz |
Power Consumption | 1500 W (Maximum) 22 W (Idle) 13 W (Standby) |
Physical | |
Color | Black |
Monitor Orientation | Horizontal |
Enclosure Material | Wood |
Operating Temperature | 59 to 95°F / 15 to 35°C |
Operating Humidity | 20 to 80% |
Dimensions (W x H x D) | 55.1 x 24.6 x 22" / 1400 x 625 x 558 mm (Subwoofer) 19 x 5.2 x 11.3" / 483 x 132 x 286 mm |
Weight | 319.7 lb / 145.0 kg (Subwoofer) 24.9 lb / 11.3 kg |
Packaging Info | |
Package Weight | 440 lb |
Box Dimensions (LxWxH) | 69 x 28 x 26" |
- Subwoofer with flexible calibration and bass-management features
- For systems ranging from simple stereo to 40+ channels of immersive audio
- Easily integrates in environments requiring analog or digital interfacing
- Use in large recording studios, film-mixing facilities, mastering suites, post-production houses, and more
- Three custom-designed 15" woofers
- 2500W Class-D RAM-SW amplifier module
- Laminar-flow bass-reflex port design provides extended low-frequency performance
- Extended low-frequency response down to 15 Hz
- Active crossover
- Maximum SPL in excess of 130 dB
- Frequency response down to 15 Hz
- Smart Active Monitoring (SAM) technology integrates with Genelec Loudspeaker Manager (GLM) software (free download available separately)
- Energy-saving Intelligent Signal Sensing (ISS) automatically puts the subwoofer into power-save mode when audio has been absent for a selected time
- Producer Black finish
- Designed, hand-assembled, and individually tested at Genelec's factory in Iisalmi, Finland
- High-quality wood fiberboard enclosure
- Heavily braced to eliminate structural resonances and vibration
- Four integrated handles for easy maneuverability and installation
- Three, 15" long-throw, magnetically shielded woofers
- Woofers deliver high SPL with low distortion and minimal power compression
- Remote design allows for flexible installation
- Individually calibrated to match supplied subwoofer speaker
- NL4 speakON input connector
- Temperature-controlled forced-air cooling provides low-noise operation and excellent reliability
- Module can be quietly installed in the listening space
- Height: 3 RU
- Produces high output and features universal mains input voltage for convenient worldwide operation
- Precision DSP algorithms ensure high dynamic range and low self-generated noise
- For total system control and automated room-calibration features
- Integrates with GLM software (free download available separately)
- Use GLM software to configure, calibrate, and control subwoofer
- Bass management divides the input audio signal into low-frequency and high-frequency content at the subwoofer crossover frequency
- Monitors and subwoofer receive full bandwidth audio signal and filtering is done separately inside each monitor and subwoofer
- Signal content below the crossover frequency is reproduced by the subwoofer
- The crossover frequency can be adjusted from 50 Hz to 100 Hz in 5 Hz increments
- Crossover is set via the GLM software
- For adjustable bass management and optimized low-frequency system performance
- 2 x XLR balanced analog audio inputs to connect a console or a monitor controller to the subwoofer
- 1 x XLR balanced analog LFE (Low Frequency Effect) input for dedicated analog LFE signal
- 2 x XLR balanced analog audio outputs to connect the subwoofer to the monitors
- 1 x XLR AES/EBU digital audio input (accepts stereo signal)
- 1 x XLR AES/EBU digital audio out/thru for bit-to-bit copy of digital signal at AES/EBU input
- 2 x RJ45 GLM control network connectors
- SpeakON connector to connect amplifier module to subwoofer cabinet
- Efficient use of materials
- Low-energy consumption
- Extended lifetime by design
Related Questions and Answers
Q: 1. Would this be a good choice to pair with the 8050A (LRC) and the 8040A (Ls,Rs) for a 5.1 setup in a 15x10 room?
A: The Genelec 7360APM would be a better choice by the specs because it goes down to 19Hz, giving you a lower frequency response. However, your room is not too large, and you may not be driving the 8050 and 8040 monitors to their full volume potential. Since the 7360APM is a SAM sub (DSP/GLM-network enabled and ready for 7.1) it's price point is higher.
Q: 2. Current model on Genelec site is 8010A - what is the difference between this 8010 and 8010A?
A: The A in an 8010 model means Active since it has a built in power amp. It seems 8010 and 8010A are used interchangeably online when referring to the active speaker.
Q: 3. How many watts.
A: 2,500 W Peak / 1,250 W RMS
Q: 4. why is the volume control 1/8in? this seems incredibly strange, given that the speakers and subwoofer both require XLR inputs, and are likely being fed either from the XLR output of a mixer, or the RCA output of a DAC. The speakers specifically state that they shouldn't be fed using an amplified signal, so that would rule out sources like an ipad, iphone, or computer.
A: The product is meant for convenience when monitoring straight out of a computer minijack. The volume control input and output have 3.5 mm stereo male and female connectors providing immediate connectivity with most computers and laptops, MP3 players and game stations. A converter cable converting 2 x RCA to 3.5 mm stereo (female) is needed for audio equipment with RCA outputs. A converter cable converting 3.5 mm stereo (male) to 2 x XLR (male) is needed to use 9000A Stereo Volume Control with Genelec monitor loudspeakers having XLR input. These cables can be obtained from your authorized Genelec dealer. The connecting cable on 9000A is Y-shaped. After 1 meter (3 ft 3") from the control knob the single cable splits into two 1 meter (3 ft 3") cables, one for audio input, one for audio output. Technical Specifications • Weight: 0,325 kg (0,72 lbs) • Height: 42 mm (1 5/8") • Diameter: 60 mm (2 1/8")
Q: 5. Thanks for your input. I need to keep shopping, since two of these are out of my price range. Can someone recommend a comparable set for less than $300/set?
A: A great alternative in similar size and price range would be the Senal ASM-3 which ship as a pair. Another quality option in your price range, the Tannoy Reveal 402. These ship as individual units and will fit your budget.
Q: 6. How much heat does the amplifier generate? I'm asking so we can properly spec our aircon system
A: The manufacturer has not provided a specification for the amount of heat that the Genelec 7382AP SAM Series 3 x 15" 2500W Studio Subwoofer generates. Genelec does note that this subwoofer is designed for indoor use only and provides specifications for the environment that it can be used in. The permissible ambient temperature is 50 to 95°F and relative humidity 20 to 80% (noncondensing). The amplifier should never be covered or placed it in a closed cabinet. The space must be ventilated or sufficiently large enough to dissipate heat so that the ambient temperature around the 7382AP does not rise above 95°F. The reflex port opening on the enclosure should have a minimum clearance of at least 8 inches to ensure functioning of the reflex port. If the subwoofer is going to be flush mounted in a wall, you must allow for unrestricted airflow in the reflex port and amplifier cooling.
Q: 7. Between this 8010 and 8010A white version bh have. what is Difference ? Just color? Or ia there any difference more than that?
A: Both monitors are the same model. The only difference between the two is the color. B&H #GE8010AP is the producer finish and B&H # GE8010AW is the same monitor in white finish.
Q: 8. Please advise if the Genelec 8020.LSE ESPRESSO Active 5.1 Monitoring System has a 220V power supply?
A: Our units ship as 120 VAC units only and cannot be externally switched.
Q: 9. What's the height of this product? How much does it raise the speakers?
A: Total height of the table stand is not offered unfortunately, however when mounted to a 6010 or 8010 speaker will raise the speaker 96mm (3.75 ) from the surface.
Q: 10. $2250.00, is that the price of the pair or a single?
A: That is the price of one single 8331 SAM studio monitor. Please discuss pricing with your B&H sales person. Thank you.
Top Bestselling Products
Genelec 7380a Sam 800w 15" Studio Subwoofer
$16,185.00 $22,011.60
Genelec 7360a Sam 10" Studio Subwoofer 300w
$7,695.00 $10,080.45
Genelec 7350a 150w 8" Sam Studio Subwoofer
$4,275.00 $6,498.00
Genelec 7370a Sam 400w 12" Studio Subwoofer
$11,850.00 $14,694.00
Genelec 8331 Sam Studio Monitor Black Finish
$7,350.00 $10,731.00
Genelec 8341a Sam Studio Monitor Black Finish
$9,285.00 $11,513.40
Genelec 8330a Sam 5" 2-way 100w Studio Monitor
$2,850.00 $4,047.00
Genelec 8330a Sam 5" 100w Active Studio Monitor
$2,397.00 $3,307.86
Genelec 8350a Sam 8" Active Studio Monitor
$7,350.00 $10,951.50
Genelec 8340a Sam 6.5" 2-way 300w Studio Monitor
$4,737.00 $5,731.77
Genelec 8341a Sam Studio Monitor White Finish
$9,285.00 $13,834.65
Genelec 8331 Sam Studio Monitor Producer Finish
$7,350.00 $11,760.00
Genelec 8341a Sam Studio Monitor Producer Finish
$9,285.00 $11,142.00
Genelec 8331 Sam Studio Monitor White Finish
$7,350.00 $10,143.00
Genelec 1032c Sam Studio Monitor - Producer Finish
$7,425.00 $9,875.25
Genelec 8330a Sam 5" 2-way 100w Active Studio Monitor
$2,850.00 $3,562.50
Genelec 8320a Sam 4" 2-way 100w Active Studio Monitor
$1,848.00 $2,217.60
Genelec 8341a Sam Studio Monitor Raw Finish
$9,285.00 $13,277.55
Genelec 8331 Sam Studio Monitor Raw Finish
$7,350.00 $9,114.00
Kentmere Pan 100 B&w Negative Film 120 Roll
$17.97 $21.56
Products You May Like
Rosco Steel Gobo #7770 - Music Design Size B
$54.00 $73.98
Tp-link Deco Be63 Be10000 Tri-band Mesh Wifi Module
$629.97 $812.66
Litufoto R19 Rgb Led Video Light Magnetic App Control
$209.97 $331.75
Tiffen 2x2" Chocolate Soft-edge Graduated Filter
$428.85 $591.81
Westcott Diamond Plaid Canvas Backdrop 5x7 Brown Grommets
$389.70 $572.86
Artcise Lh6 Tripod Leveling Head For Photography
$135.00 $203.85
Sachtler Cover Cine M Black
$1,482.00 $2,148.90
Pearstone Cat 6a Snagless Patch Cable 100' Blue
$44.10 $64.39
Vaxis Vfx 4x5.65" Rainbow Streak Filter 2mm
$956.85 $1,502.25
Argosy V1r Universal Workstation Desk Vr1503 15u Black
$12,779.97 $19,808.95
Ongws5000b Guitar Workstation - Black | On-stage
$509.85 $815.76
Canon C200 Camera Cage With Evf Mount, Top Handle, Baseplate
$2,505.36 $3,732.99
Tru-dot Tritium Night Sight For Benelli Shotguns
$119.97 $151.16
Film Photography Project Color Negative 620 Roll Film
$56.97 $73.49
Astera Fp6 Hydrapanel Led Light With Case
$1,444.50 $2,296.76
Holosun Eps Carry Pistol Sight Green Circle-dot Reticle
$1,289.97 $1,741.46
Brother Lc3029c High Yield Cyan Ink Cartridge
$57.51 $69.59
Optoma 4k400x 4000-lumen Uhd Dlp Projector
$4,497.00 $6,565.62
Logickeyboard Sony Vegas Pro Slim Line Keyboard
$389.70 $479.33