Belden Hd Bnc Crimp Connector For 1694A Rg6 Coax Cable

Belden Hd Bnc Crimp Connector For 1694a Rg6 Coax Cable

Product Code: eq62875
Availability: In Stock

$9.09 $13.00

Qty

11 reviews Write a review

Description
Reviews (11)

This Belden HD BNC Crimp Connector for 1694A RG6 Coax Cableis designed for use with the Belden 1694A RG6 coax cable. The brass connector delivers better than -23 dB return loss at 4.5 GHz with its solid insulator materials to deliver professional, high-definition broadcast audio and video. Its traditional three-piece design and 360° compression rings make for durability and a solid performance. The connector is color-coded with a green ring to identify its compatibility with 1694A RG6 coax cables.

Three-Piece Straight BNC Connector Compatible with Belden 1694A RG6 Cable 360° Compression Rings 75-Ohm Impedance

Parameters
Connector Type	BNC Coaxial, 3-Piece Crimp
Compatibility	Belden 1694A RG6 Coax Cable
Body Type	Straight Plug
Contact Material	Brass
Termination	Crimp
Impedance	75 Ohms
Voltage Rating	500 VRMS
Return Loss	3 to 4.5 GHz / ≥ 21 to -27 dB
Insulation Resistance	> 5000 Megohms at 100 VDC
Durability	500 Cycles
Cable Retention Force	> 90 lb / 41 kg
Finish	Body/Bayonet: Brass, Nickel-Plated
Packaging Info
Package Weight	0.035 lb
Box Dimensions (LxWxH)	13.15 x 9.1 x 0.6"

Related Questions and Answers

Q: 1. is this rated for use in plenum?

A: No. Refer to the Belden Master Catalog for the plenum version of this cable. I believe it is 1695A but that part number may have changed.

Q: 2. Would these work for 12G SDI applications?

A: Belden only rates these connectors for 3G-SDI. BH #CABCPD33UHD works for 12G-SDI along with BH #CAL33CUHD300. https://www.bhphotovideo.com/c/product/1458879-REG/canare_bcp_d33uhd_75_ohm_bnc_male_end.html https://www.bhphotovideo.com/c/product/1458883-REG/canare_l_3_3cuhd_300m_75_ohm_12g_sdi_uhd_video.html

Q: 3. will this work 3g-sdi ?

A: Yes, this cable is rated for 3G-SDI.

Q: 4. Dose this connector can be use for " DRAKA 1.0/4.8 AF - 75 OHMS HDTV 5GHZ"?

A: This is specifically for 1694A RG6 Coax cable.

Q: 5. Can i use this cable to connect a Sony EVI-HD1 to an ATEM (Blackmagic) or should i use an RG59 cable?

A: Yes, the EV1-HD1 has an SDI output to use with this cable.

Q: 6. Does this Belden 1694A RG6 connector work with PCT international TRS SERIES RG 6-59 PCT-RH-CT compression tool? I think it does but double checking...

A: We are not familiar with that tool, however we do know that this connector will work wit the Platinum Tools 16220C SealSmart II Compression Crimp Tool, B&H # PL16220C. https://bhpho.to/2LFHVqx

Q: 7. Which compression crimper is best for this product and Belden's 1694A cabling? I can't find a clear answer online.

A: The Belden CPLCRBC-BR Double Bubble Compression Tool is the recommended crimper for Belden 12 GHz UHD BNC Compression Connector for 1694A RG6 Coax Cable.

Q: 8. Will it carry a HD-SDI (1.5G) signal 500 ft?

A: I work at a tv station as well. We have found that 300 to 350' is max then you have to reclock your signal. If you have the test equipment, look at the eye pattern of your signal thru the cable. You will be able to see the degradation.

Q: 9. There is a comment that the reels are consistently coming up short in length. Sometimes as much as 100 feet. Has this issue been addressed?

A: Didn.t happen to my order.

Q: 10. Is this connector compatible with BH #BE4855R1KBL?

A: The Belden 12 GHz UHD BNC 3-Piece Crimp Connector for RG59 Cable (50-Pack) is meant to be used with Belden 12G-SDI 4K UHD Precision 75 Ohms Video Cable.

Johnathon	07/09/2024
[500 VRMS] Always pleased with how consistent and easy these connectors are. Never had an issue with signal loss, disconnection, or anything else. 5

Daniel	24/08/2024
[500 Cycles] I purchased this BNC for my 1855A cable. Very happy there was a bulk buy kit instead of the silly single packs. Has everything you need, comes in a nice hard foam pack. Crimps perfectly with the Greenlee 1300 Series Cable Crimper for Belden. (make sure you get the Belden version!) Nice a neat crimp with just the right amount of pressure. I used the Canare TS100U Coaxial Cable Stripper (5-in-1) (again, get Belden version) again worked well with these fittings. I was able to run a 12G signal (4k60) with a Blackmagic Ursa mini G2 over a 3m run (haven't made a longer run yet) Very very happy! Will buy again! Hard to find these in Australia, so I get them from B&H! 5

Daniel	24/08/2024
[500 Cycles] I purchased this BNC for my 1855A cable. Very happy there was a bulk buy kit instead of the silly single packs. Has everything you need, comes in a nice hard foam pack. Crimps perfectly with the Greenlee 1300 Series Cable Crimper for Belden. (make sure you get the Belden version!) Nice a neat crimp with just the right amount of pressure. I used the Canare TS100U Coaxial Cable Stripper (5-in-1) (again, get Belden version) again worked well with these fittings. I was able to run a 12G signal (4k60) with a Blackmagic Ursa mini G2 over a 3m run (haven't made a longer run yet) Very very happy! Will buy again! Hard to find these in Australia, so I get them from B&H! 5

Nathan	04/08/2024
[> 90 lb / 41 kg] Rock solid. 5

Richard	26/07/2024
[75 Ohms] My cables are used in live broadcast and streaming environments and must work. I need a product I trust. One the highly positive side, they come in fancy packaging :) 5

Randy	22/07/2024
[75 Ohms] Much easier to fit on the cable than many others that claim their quad capable 5

Randy	22/07/2024
[75 Ohms] Much easier to fit on the cable than many others that claim their quad capable 5

James	06/07/2024
[Straight Plug] We were desperately trying to find Belden 4694R connectors and no one had them. We were told by another vendor that these connectors would work and they did. Since we're using the 4694 cable for HD only, we'll be okay. If we upgrade to 4K, they'll probably work too because our cable lengths aren't over 150 feet. Quality connectors and extremely easy to put on cable with the Belden tools. 5