Kalt Tt4 2-In-1 Tabletop Tripod Black

Kalt Tt4 2-in-1 Tabletop Tripod Black

Product Code: eq62954
Availability: In Stock

$65.85 $102.73

Qty

8 reviews Write a review

Description
Reviews (8)

The black Kalt TT4 2-in-1 Tabletop Tripod Blackfrom Kalt TT4 2-in-1 Tabletop Tripod Blackfeatures a detachable ball head with a load capacity of 2.2 lb and a 1/4"-20 threaded camera mount. The head also has a single locking knob that controls the movement of the ball, and the 1-section legs have 3 levels of height adjustability. The 5 oz tripod is designed to hold a smartphone, an action camera, or a mirrorless camera.

Load Capacity: 2.2 lb Leg Sections: 1 Weight: 5 oz Detachable Ball Head Single-Locking Knob 1/4"-20 Threaded Camera Mount 3-Levels of Height Adjustability

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male
Head Type	Ball Head
Drag Control	No
Load Capacity	2.2 lb / 1 kg
Maximum Working Height	Not Specified by Manufacturer
Weight	5 oz / 142 g
Parameters
Camera Plate	No
Head
Head Type	Ball Head
Pan & Tilt
Drag Control	No
Independent Pan Lock	No
General
Load Capacity	2.2 lb / 1 kg
Maximum Working Height	Not Specified by Manufacturer
Weight	5 oz / 142 g

Related Questions and Answers

Q: 1. Can this unit handle a Nikon D 90, or 7000 without tripping or falling over?

A: I just own the D500. Yes it can handle the d500 + the heavy Nikon 24-70 provided you set it up properly i.e. one leg in the direction of the lens

Q: 2. I havent receive this item. Any updates?

A: Unfortunately questions related to your specific order cannot be answered with our Q+A feature. Please contact our Customer Service Department directly for assistance.To Call: 800.221.5743 (+1.212.239.7765 internationally) Email: cs@bhphotovideo.comHelp Center: a href= https://www.bhphotovideo.com/find/HelpCenter/helpcenter.jsp target= _blank https://www.bhphotovideo.com/find/HelpCenter/helpcenter.jsp/a

Q: 3. can I balance an 80D with an 18-135 lens on an 8 inch monopod?

A: The lens weight would most likely tiltThe tripod

Q: 4. Is it 1/4 or 3/8 screw?

A: The mounting screw is 3/8-16".

Q: 5. When it comes to the smartphone mount can you tell us the iphones it is compatible with

A: The Xuma Smartphone Mount opens to 3.25 inches, so it will fit iPhones of that width or smaller.

Q: 6. How long are the silver legs? What is the diameter of the shaft? Can the top, where the tighten bolt (under ball) be removed?

A: The silver legs are approximately 3 and 3/4 inches when they are in position on the desk the diameter of the Shaft is approximately just around 7/8 of an inch the whole top section is removable as one piece from the shaft.

Q: 7. Looking for tripod to take on my kayak and to do macro -I have mono pod w Oben quick release plate -can I use it on this as well ?

A: Hi, Pretty courageous move to take your camera on a kayak, hats off to you. I purchased the Oben TT-200 to use with a Leica D LUX 6, the ballhead provided with the TT 200 mounts to any camera body that supports the 1/4 screw mount. Your Oben quick release plate will not adapt to the TT 200 ballhead. However, you can remove your monopods bullhead and mount it to the TT 200 pole. Thats the way youll be able to use your quick release feature and plate. Happy Kayaking Thumbs upKind Regards Srecko

Q: 8. Is the material for this product plastic or metal?

A: the legs are plastic. But it is pretty durable, don't think it would break easily.

Q: 9. When I use a camera D7100 with lens 18-300mm, which weight is about 3lb, Could Oben tripod TT-50 support them?

A: The TT-50 is a small table top tripod. With the ball head in a vertical position it may be OK. If there is any pressure on the ball head, it could creep. A better choice may be the Oben TT-100 which has a removable head. See the link below. If the head cannot handle the specific situation, a more robust head can be attached.

Q: 10. What is the diameter of the mount?

A: 50mm, just under 2 inches. Longer than most camera baseplates. Cork topped to help hold camera steadier

Rachel	27/09/2024
[Ball Head] Super simple & light durable with the leather tab 5

Darryl	04/09/2024
[Ball Head] Typical Gitzo design simple, durable, and made with top quality materials, carbon fiber. Adjustable to two heights. I'm using it with the Gitzo Traveler 1 ball head. 5

Peter840	04/09/2024
[1x 1/4"-20 Male] The one that I just bought from B+H will be my third one: the first one I gave away to a friend in the Middle East, the second one lasted me for 27 years or so. I've been using it for both SLR's and video and I have it with me whenever I go out to take pictures. The only minor thing I can think about is that you can not replace the ball-head when it is worn-out as happend to me this time, but let's be real, replacing it after 27 years.... no problem. 5

richard	17/07/2024
[Ball Head] Very well designed and engineered tabletop tripod. This one is my second, seeing as one of my friends apparently thought a lot of my first one and absconded with it. It's rare in this type of product to see the amount of machining and detail work that must have been involved in its manufacture. As far as I can tell, every part is made of one type of metal or another, except for the tightening wheel at the top of the ball head, which is plastic. I even checked inside the barrel which holds the spring-loaded legs in a bunch. The top and bottom caps unscrew. Very well done indeed. I've used this with medium sized camcorders as well as a Pentax k-r, and as a stand for a slave flash, and so far, so good. Recommended, if you need a small tripod. 5

Robo Nevada	21/06/2024
[1x 1/4"-20 Male] Had one of these for years. Using an SLR (film) camera with zoom lens. Loved it! Used it for backpacking; the lightness is a plus. I then got out of photogrphy and ended up loosing it. In search of a new light weight tri-pod that actually works was leading me into dead ends... until I found it here. 5

Oliver	02/06/2024
[Ball Head] It holds 6-7 cards plus 4-5 notes. Easy to access any card you need while keeping the overall thickness very low. Like the design. 5

Julie	13/04/2024
[Ball Head] Fully expected to send back after deeming a fluff purchase that would not fulfill its utility. Happy to say this mini pod has a little swag with compact, legendary Gitzo quality components. Nice tight ball head and great rubber feet that offer reliable support on various surfaces for my A6400 18-135mm. The misalignment of the mounting plate is obvious, but doesn't bother me. Would be nice to have a sleeve to transport this in. These are sturdy pieces, but protecting the investment is a huge thing for collectors, Gitzo! Great job, BH! 5

David	30/11/-0001
[1x 1/4"-20 Male] Like the prior reviewer I have had this little gem for 20years or so. With the primitive ball head it also worksvery nicely as a chest/shoulder brace. It is also a usefuloff camera flash stand. Highly recommended. Expertise: Experienced (40 years or so) amateur. Items I Recommend: Nikon AS-19 5