Digitalfoto Inner Screw Magic Ball Arm (5.91")

Product Code: eq62991
Availability: In Stock

$144.00 $221.76

Qty

8 reviews Write a review

Description
Reviews (8)

The 5.91" long DigitalFoto Inner Screw Magic Ball Arm (5.91")is an arm for attaching and positioning available accessories to your camera or other 1/4"-20 mounting point. It features a 1/4"-20 thread on each end and supports up to 11 pounds. It is machined from anodized aluminum and stainless steel for strength, and it features four points of articulation in two groups with a locking lever for each group.

The ends of the arm are set into ball-joints, with each joint providing swivel and lockable position adjustment. Each end features a rubber-topped platform with a 1/4"-20 thread, and a thumbwheel allows you to tighten your accessory on the mount. One end features raised metal fittings that make this compatible with the EZ-Link system when using the included 1/4"-20 to 3/8"-16 adapter bushings.

Four Points of Articulation Unfolds to 5.91 Inches Supports up to 11 Pounds Metal Construction Weight 6.5 oz Two Locking Levers Ball Joint End with 1/4"-20 Thread Compatible with EZ-Link System Includes 1/4"-20 to 3/8"-16 Bushings

Parameters
Load Capacity	11.02 lb / 5 kg
Top Mount	1/4"-20 Male
Bottom Mount	1/4"-20 Male
Points of Articulation	3
Maximum Length	5.91" / 15.01 cm
Weight	6.53 oz / 185 g
Packaging Info
Package Weight	0.36 lb
Box Dimensions (LxWxH)	7.6 x 2.9 x 1.6"

The arm features a total of four articulating points in two groups, with each group being tightened or loosened by a discrete locking lever.

Related Questions and Answers

Q: 1. Are the locator pins spring loaded and retractable?

A: Yes, the SmallRig Magic Arm with Dual Ball Heads (1/4"-20 Screws) locator pins will retract.

Q: 2. What is the weight of the assembled rig (without gimbal)?

A: The Handheld Gimbal Ring weighs 3 kg.

Q: 3. Is it possible to get the anti-twist pins off the system?

A: For the Kondor Blue Ball Head with 3/8--16 ARRI-Style Anti-Twist Screw for Magic Arm (Black), we are not aware of any official way to remove the anti-twist pins.

Q: 4. Are these 25mm balls? Would like to use them with a magic arm that uses 25mm.

A: Yes, the Kondor Blue Ball Head with 3/8"-16 ARRI-Style Anti-Twist Screw for Magic Arm (Gray) is 25mm.

Q: 5. Will the magic Ring X support the Zhiyun Crane 3S?

A: While the DigitalFoto Solution Limited Magic Ring X for Gimbals also should support the Zhiyun 3S gimbal, we recommend the model dedicated to the Zhiyun 3S gimbal. I'm sure it is a stronger design made specifically for the 3S payload weight. DigitalFoto Solution Limited MAGIC RING I Handheld Gimbal Ring with ARRI-Style Rosette Adapter for Zhiyun CRANE 3S BH #DIMAGICRINGI

Q: 6. Are the locating pins Arri 1/4-20 standard? Will the pins match up to the SmallHD Cine 7?

A: Yes, the SmallRig Magic Arm with Dual Ball Heads (1/4"-20 Screw and NATO Clamp) has a standard Arri-Style 1/4"-20 pins and will attach to the bottom or sides of the SmallHD Cine 7 Touchscreen On-Camera Monitor (L-Series), B&H # SMMONCINE7.

Q: 7. What are the materials?

A: This is all metal, except for the collar on the 1/4" stud, which is made of plastic.

Q: 8. Are the pins removable?

A: Yes they are.

Q: 9. One end is a 1/4"-20 screw, what's the other end?

A: On the other end of the Acebil Multifunction Magic Arm with Dual Ball Mounts (15") is a female 1/4"-20 thread.

Q: 10. Ball head size? 20mm?

A: Correct, the ball portion of the SmallRig Magic Arm with Dual Ball Heads' (1/4"-20 Screws) ball heads is 20mm.

ralph	23/08/2024
[3] Great build, the locating pins are flush on the mounts, and I prefer them just a little tight because they get worn out in the long run but definitely worth the investment. These will probably last forever. 5

Roy	17/07/2024
[3] I have several of these and I'm not afraid to put digital recorders, monitors with batteries, etc. on them. They really hold a lot of weight right where you put it. The 1/4 screw design on both ends is MUCH better than just the stud with a plastic 'locking' collar. 5

James	29/06/2024
[0.36 lb] Finally a well made support device that is versatile for those tricky production challenges. 5

Johann	25/06/2024
[1/4"-20 Male ] I love it 5

Jesi	19/06/2024
[3] Nice and sturdy, very high quality and will not loosen up at all. 5

David	06/06/2024
[3] I needed these to hang a small Lume Cube light from a shelf. Worked great. As long as one realizes how small these are and doesn't try to overload them, they are marvels for the money. They pair very well with the SmallRig mini super clamp, but could just as easily mount to a big clamp well. I pictured the set with a Manfrotto 035 super clamp for size comparison. 5

Hernan	09/05/2024
[1/4"-20 Male ] Es una herramienta ya muy útil y versátil para trabajar , liviana y no carga peso adicional al trabajo 5

David	08/04/2024
[3] If you are using a gimbal for live-streaming this item along with the df M-0667 L-Bracket are a must have. I use both to hold my monitor while I move around and stream. It keeps the monitor right where I need it when I'm holding the set-up above my head for the perfect shot. It is also great if you want to keep the monitor from disturbing others in low light condition. 5