Carbon Fiber Slider 39.3" By Digitalfoto Solution Limited

Product Code: eq62999
Availability: In Stock

$375.00 $517.50

Qty

8 reviews Write a review

Description
Reviews (8)

This 39.3" long Carbon Fiber Slider 39.3" by DigitalFoto Solution Limitedweighs 4.4 pounds, yet can support 22 pounds on its 19mm diameter carbon fiber rods. The large carriage accommodates flat base fluid heads with either a 1/4"-20 or 3/8"-16 threaded mounting screw. Six bearings enable smooth travel along the 19mm rods.

In addition to attachment screw there are 1/4"-20 and 3/8"-16 threaded holes on the carriage itself, which can be used to mount accessories. The track ends incorporate both 1/4"-20 and 3/8"-16 mounting screw holes, while also featuring angle-adjustable legs with height-adjustable rubber feet for leveling on uneven terrain. A padded carrying case is included to conveniently store and transport the slider.

Roller Bearing Sliding System 22 Pound Load Capacity Lightweight 19mm Carbon Fiber Rails 6 x Sealed Bearings on Aluminum Rollers Large Carriage with Accessory Threads Tripod Mounting Adjustable Legs for Leveling Padded Carrying Case

Key Specs
Load Capacity	22 lb / 9.98 kg
Camera Mounting Screw	1/4"-20 Male, 3/8"-16 Male
Weight	4.4 lb / 2.00 kg
Parameters
Bubble Level	Yes
Mounting
Camera Mounting Screw	1/4"-20 Male, 3/8"-16 Male
Tripod Mounting	3x 3/8"-16 Female Thread 2x 1/4"-20 Female Thread
Accessory Mounting	2x 3/8"-16 Female 2x 1/4"-20 Female
Rail
Diameter	0.75" / 19 mm
Rail Material	Carbon Fiber
Physical
Track Dimensions	L: 39.37" / L: 100 cm
Body Material	Aluminum
Weight	4.4 lb / 2.00 kg

Durable and lightweight construction
19mm carbon fiber rails
22 lb load capacity
Large camera carriage
Six bearings
1/4"-20 and 3/8"-16 threaded accessory mounting holes on the carriage
Adjustable outrigger legs for leveling
Integrated bubble level
Weighs only 4.4 lb

Related Questions and Answers

Q: 1. Does this work with the Zhiyun 3s pro?

A: Yes, DigitalFoto Solution Limited TRINIPOD Carbon Fiber Monopod Sled and Yoke Collar System works with the Zhiyun 3s or 3S Pro Gimbals.

Q: 2. Does the Trinipod column have holes at the top and bottom for internal routing of cables as shown on DigitalFoto's website?

A: No, the DigitalFoto Solution Limited TRINIPOD Carbon Fiber Monopod Sled and Yoke Collar System does not have holes in the column for cable management.

Q: 3. Whats the weight limit?

A: According to the manufacturer, the DigitalFoto Solution Limited Swiveling Pipe C-Clamp has a maximum load capacity of 110.23 lb (50 kg).

Q: 4. how to attach this to a tripod ? it is not clear in the picture

A: The following slider tracks ends incorporate both 1/4"-20 and 3/8"-16 mounting screw holes. for tripods or light stands Please review the following item if you are looking for a tripod to support the following slider. Benro TMA27A Series 2 Mach3 Aluminum Tripod https://bhpho.to/2UMV48e

Q: 5. Is this compatible with the Steadimate Aero 15 pin? https://bhpho.to/3hlYZ4A

A: The TRINIPOD will fit on the arm of any system that uses a 16mm pin, making it compatible with most vest/arm stabilizer support systems.

Q: 6. What is the diameter of the carbon fiber portion of the rod?

A: It is around 30mm in diameter.

Q: 7. Does this work with the Zhiyun Crane 2s Pro?

A: The DigitalFoto Solution Limited TRINIPOD Carbon Fiber Monopod Sled and Yoke Collar System would work with the Zhiyun CRANE 2S PRO.

Q: 8. Will this extension pole fit in the nanuk case I bought for the Ronin RS3?

A: The DigitalFoto Solution Limited Carbon Fiber Extend Stick is 13" long. Nanuk Cases are only designed to fit DJI standard parts. It may fit though.

Q: 9. Weight?

A: The DigitalFoto Solution Limited CH5 Carbon Fiber Gimbal Tripod Head for Telephoto Lens weighs 2.18 lb / 989 g, and has a load capacity of 44.1 lb / 20 kg.

Q: 10. Is this the same as the pro II

A: No, the DigitalFoto Solution Limited TRINIPOD Carbon Fiber Monopod Sled and Yoke Collar System is not the same as the DigitalFoto Solution Limited THANOS-PRO II Gimbal Support System, which is a higher-level system.

Pedro	13/08/2024
[Yes] Great for the Ronin SC! 5

John	27/07/2024
[Aluminum] I used it to clamp to a speaker support to get some GoPro footage, ample locations to attach the cheese plate to for a level shot. 5

Kurtis	23/07/2024
[Carbon Fiber] Have not used yet. But installed just to see how it would work. It will work great. Good Product. 5

Peter	21/06/2024
[Carbon Fiber] This is a very basic extension for my Ronin-S that works perfectly. It is light weight, but strong and well made. While the length may seem short, the addition of this extender to my Ronin-S can add even more dramatics to the movement that I set up on my videos. I would defiantly recommend this to others. Great value for the money. 5

Peter	17/05/2024
[Yes] I was amazed at how well this very lightweight extension works. It is well built, and it allows me to add versatility to my gimbal shots by extending the reach without adding any excess weight. In fact I have used two with my DJI OM4 Smartphone Gimbal. 5

Light	29/04/2024
[Yes] The thickness and width of this unit makes it a very strong mounting attachment ... just about anywhere. Plus, the multiple 1/4 20 mounting holes provides nearly infinite options. 5

Kirk	16/04/2024
[Yes] I use them to clip my Quantum battery packs to various light stands. They've got the place for clip mounted items, but about a million threaded mounts for everything else. 5