Camvate 1/4"-20 To 3/8"-16 Screw Adapter (2-Pack)

Camvate 1/4"-20 To 3/8"-16 Screw Adapter (2-pack)

Product Code: eq63025
Availability: In Stock

$20.67 $25.42

Qty

11 reviews Write a review

Description
Reviews (11)

Use this nickel-plated brass CAMVATE 1/4"-20 to 3/8"-16 Screw Adapter (2-Pack)from CAMVATE 1/4"-20 to 3/8"-16 Screw Adapter (2-Pack)to connect cameras and tripod plates that have 1/4"-20 male screws and 3/8"-16 female threads. The crosshatch knurling on the side helps with grip when tightening, and a nylon washer is included to protect your camera base. Two screw adapters are included in this pack.

Two Screws Included Use with Camera or Tripod Plates Nickel-Plated Brass Construction Crosshatch Knurling for Grip Nylon Washer Included

Parameters
Material of Construction	Nickel-plated brass
Screw Thread	1/4"-20 female 3/8"-16 male
Dimensions (H x Diam.)	0.8 x 0.6" / 2 x 1.6 cm
Weight	Each: 0.8 oz / 22 g
Packaging Info
Package Weight	0.095 lb
Box Dimensions (LxWxH)	1.95 x 1.15 x 0.7"

Related Questions and Answers

Q: 1. Can this be attached to a 75mmx75mm VESA mount?

A: No, it appears that the maximum spacing for the 1/4"-20 screw threads is 72mm.

Q: 2. This says it's a set, but doesn't clarify. Are there actually 2 of these adapters included?

A: Yes, the CAMVATE 1/4"-20 Female to 5/8"-27 Male and 3/8"-16 Female to 5/8"-27 Male Microphone Screw Adapter Set includes two adapters for two different adaptation scenarios.

Q: 3. Are these Zinc Plated?

A: The CAMVATE 1/4"-20 Female to 3/8"-16 Male Screw Adapter for Tripod (2-Pack) are made of Stainless-Steel.

Q: 4. Does the screw allow you to adjust the tension of the tilt mount so that you can adjust the angle on the fly and have it stay put, or do you have to use the screwdriver to loosen and tighten the screw to lock it down every time you want to adjust it?

A: With the CAMVATE Tilting Shoe Adapter Support with 1/4"-20 Screw for Monitor/Light, you need to use the included screwdriver to loosen and tighten the tilt.

Q: 5. How long is the thread? Long enough to affix an Arca-Swiss plate to the bottom of a camera?

A: CRDBAG 1/4"-20 D-Ring Camera Screw (4-Pack) are 4mm long. For arca swiss plates you will need at least a 10mm screw with a neck.

Q: 6. What is the mm spacing between the two 1/4-20 screws on center?

A: The spacing between the two 1/4-20 threads on the CAMVATE 0B 2-Pin Female 1 to 3 Power Splitter Adapter Box with 1/4"-20 Screw Mount is 7mm. However you can slide the 2nd screw down up too 14mm away from the first screw.

Q: 7. Would this work as a projector mount for an 8lb projector?

A: No it would not.

Q: 8. i have a Sony A7iii. The Tripod Mounting Thread is 1 x 1/4"-20 Female (Bottom). I need to screw the camera onto a quick-release plate. Will this item work? TIA!

A: CAMVATE 1/4"-20 Female to 3/8"-16 Male Screw Adapter for Tripod (2-Pack) won't work as it fits screw openings that are 3/8".

Q: 9. Can this be mounted with 2 screws to a Fujifilm XT4 cage, the one with smaller right handgrip? Mount off-center to the right?

A: The SmallRig Cheese Bar with 1/4"-20 & 3/8"-16 Screw Holes is very versatile and can be mounted on any cage.

Q: 10. I'm considering using this to attach an Arca Swiss plate to my camera. What is the diameter of the split ring? Regards, David.

A: The split ring on the CAMVATE Split Ring with 1/4"-20 Screw for Tripod/Camera Attachment has an external diameter of 29mm, while the internal diameter is 27mm.

Wayne	11/09/2024
[0.095 lb] A nice add to my collection of various parts for camera mounting. Help me to adapt to any situation and equipment. 5

OfficePro	27/08/2024
[0.095 lb] Very solid, good finish, do what they need to do. 5

Tyler	27/08/2024
[0.095 lb] Helps me mount lights and camera plates to tripods and light stands that I already have with the more common smaller thread! 5

Kalman	13/08/2024
[0.095 lb] This adapter is the longest one I have seen. It gives me peace of mind because the other adapters are shorter with very little thread, and I fear the threads in the other adapters will strip with heavier cameras. The CAMVATE adapter also has a slot for a large screwdriver or a quarter will work too. The adapter has a small collar that keeps it from going to deep into the tripod head. 5

Stephen	05/07/2024
[0.095 lb] A solid product that meets my expectations. 5

Greg	25/06/2024
[0.095 lb] This product helped connect my boom mic holder to a Zacuto handle. 5

Bart	13/05/2024
[0.095 lb] I purchased these because I recently purchased a Zeiss Ikon Nettar 515 camera and the tripod mount was bigger than the standard 1/4 inch tripod mount but wanted a way to adapt it to a regular tripod mount. These work perfectly. They are a little longer than I need but if it becomes a problem, I can just cut them a little shorter. The camera hardly weighs anything so I'm not worried about the weight but now I can shoot tripod mounted since the shutter speed times on the Nettar 515 are pretty slow and I'm usually in the woods/nature taking my pictures. Would buy again if needed but since the package comes with two, I probably won't need any more anytime soon. Product appears to be of high quality though. Well made. 5