Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. what is the height of this unit without wheels?

A: The SRK-16 is 30.7 in height without casters.

Q: 2. How long is the strap?

A: The length of the strap of Tenba Skyline 7 Shoulder Bag is 28".

Q: 3. Will the x100vi fit with a grip?

A: The FUJIFILM X100VI Digital Camera with a grip, like the SmallRig L-Shape Grip for FUJIFILM X100VI/X100V, will not fit in the Tenba Skyline V2 Pouch 4 (Black). I recommend the Ruggard Lyra 60 Camera Pouch (Black) instead: https://bhpho.to/4dzRJMk.

Q: 4. Is this the same spec as the rods used in hollywood arms?

A: Yes. The following unit will adapt to any grip head on the market.

Q: 5. Does this Samson unit be able to fit analog gear like compressors, interfaces, eq's etc.? Just trying to find the right rack cabinet for placing all my analog gear.

A: Yes, the rack can fit any standard 19" wide rack gear.

Q: 6. Will an x100vi with a filter and hood fit inside?

A: The Tenba Skyline V2 Pouch 4 (Black) interrior dimensions are 5.25 x 3 x 2.5". It will only fit the FUJIFILM X100VI Digital Camera with the FUJIFILM AR-X100 Adapter Ring and a low profile 49mm filter. Unfortunately the lens hood is to tall. The camera depth with the lens hood attached is 3'', while the bag depth is 2.5''.

Q: 7. Are there any pockets or slots for an sd card or a battery?

A: The Tenba Skyline V2 Pouch 4 (Black) does not have a pocket for accessories.

Q: 8. Does this rack take cage nuts or cage clips to install equipment on the rails? I see the rails have slight circular threads in them but is that enough to house equipment with a standard 10-32 screw or are cage nuts needed?

A: This rack comes standard with (2) pairs of 11-gauge threaded, 10-32 rackrails with EIA spacing and labeled rackspace increments. Electrical knockouts on rear plates (both top and bottom) can easily be removed to pass cables (includes 1/2", 3/4", 1" and 1-1/2" openings). The configurable, open top also includes a UHF/VHF knockout. Pre-Installed Washers Pre-installed washers on all 10-32 threaded rackscrews save installation time. Cabinet Accepts 19" Equipment (Width) Depth 24" Capacity 64-3/4" (37U)

Q: 9. Can it fit EOS RP with FR24-105mm F4-7.1 IS STM lens attached?

A: This bag would be too tight to fit the Canon EOS RP Mirrorless Digital Camera with 24-105mm f/4-7.1 Lens with the lens facing down. The Tenba Skyline 8 Top Load (Black), BH # TESL8TLB. https://bhpho.to/2VMrQDk

Q: 10. what are the dimensions of the large and small Tenba bags. good fit for Panasonic ZS200 camera?

A: The interior dimensions of the Tenba Skyline V2 Pouch 3 are 2.75W x 4.5H x 1.75D in. The The interior dimensions of the Tenba Skyline V2 Pouch 4 are 3W x 5.25H x 2.5D in. The dimensions of the Panasonic ZS200 camera are 4.38 x 1.78 x 2.61 in so the Tenba Skyline V2 Pouch 3 will fit the camera perfectly.