You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Acebil Polejib Kit With Tripod & Carrying Case

Acebil Polejib Kit With Tripod & Carrying Case
  • Product Code: eq63322
  • Availability: In Stock

$49,500.00 $79,200.00

The Acebil Polejib Kit with Tripod & Carrying Casefrom Acebil Polejib Kit with Tripod & Carrying Caseis designed to attach the subjib to the main jib and can support up to 15.4 lb payloads. The main dive is equipped with a patented mechanism that can be assembled by one person. Batteries can be mounted onto the jib body (available separately). It consists of four 4.9' sections and is a joint type which makes it convenient to carry. Operation is also possible with a shorter length. Both HC-JIB and SC-150 cases are included.

Polejib Crane    CINE150A Single-Stage Aluminum Tripod    HC-JIB, SC-150 & TC-150 Cases

Parameters
Payload15.4 lb / 7 kg
26.5 lb / 12 kg with support wire
MaterialPole: Carbon
Chassis: Aluminum
Head Attachment100 mm
Tripod Attachment100 mm
Dimensions4 x 4.9' / 1.5 m
Weight29 lb / 13.2 kg

High-quality carbon pole

Rugged lightweight aluminum chassis

Stable and continuous movement

Related Questions and Answers

Q: 1. Will this case fit a BV10 100mm tripod head?

A: The Benro Polaris Smart Tripod Head Carrying Case can carry the BV10 100mm Video Head.

Q: 2. Do these rubber feet pop off?

A: Yes

Q: 3. will this work on my canon XA20 video camera?

A: This should work well with the XA20 plus the zoom control is of the LANC type so it interface correctly with the camcorder and you will have smooth zooms.

Q: 4. What are the interior dimensions?

A: The Libec RC-10 Tripod Carrying Case is about 7 inches in diameter and 36 inches long inside.

Q: 5. Does the 15min rod adapter comes in the kit? It shows on the pictures but not on the ïnthe box section".

A: Yes, the Tilta Mirage VND Kit does included the 15mm rod adapter as pictured.

Q: 6. Does this have built in IR filtration? If so what wave lengths are being filtered? To be used with RED komodo, has no IR filter

A: No, the Tilta Mirage VND Kit does not cut IR on it's own, but you can add Vaxis IRND filters to the matte box to block out IR light. See: https://bhpho.to/3J5e2wv

Q: 7. Does the basic kit still include a 4x5.56" filter tray and a rod clamp?

A: Please add the following 4x5.65 tray to your Tilta Mirage matte-box purchase it is not included. Please note that the 15mm LWS Rod Support adapter is included. Tilta 4 x 5.65" Stackable Filter Tray Holder for Mirage Matte Box BH #TIMBT16SFH

Q: 8. Are there any compatible clamp on adapters. 85mm O.D - 95mm O.D?

A: As of now, there is only one clamp on adapter to reach 95mm. Wooden Camera Step-Up Ring for Zip Box Pro Matte Box (82 to 95mm) https://www.bhphotovideo.com/c/product/1612632-REG/wooden_camera_283500_step_up_ring_82_95mm.html

Q: 9. Does Tilta offers a 80 mm to 95 mm adapter for Mirage? If not, how can I use my lenses with it because it has a 80 mm front diameter.

A: Unfortunately Tilta does not make an 80mm to 95mm step up adapter for the Mirage. The best thing to do is to search for an 80mm to 82mm step up ring or use paper tape.

Q: 10. Can this bag hold a 35” (inch) in length and weighing around 6 pounds of light stand?

A: Yes, as this bag has internal dimensions of 36.6" and it is made for a tripod weighing a bit over 6lbs.

12/09/2024

[100 mm] I bought this for a ProMaster version of MeFoto Globtrotter tripod. Specs say my tripod is slightly larger and this case fit it like a glove. I was impressed with the build quality. Really the perfect bag for the tripod.

5
19/08/2024

[29 lb / 13.2 kg] Just received it today. Just what I was looking for - sturdy, well built, fluid. And I got it on sale for $100 and its well worth the price. I now finally have a real tripod instead of my old rinky dink ones.

5
26/07/2024

[29 lb / 13.2 kg] this is the perfect soft mic case for on the go. the divider protects the stands from scratching each other, along with the velcro straps. i was able to squeeze four short boom stands in it, two on each side. it has a clear label holder to indicate which stands in each bag, though i wish it came with labels. i bought four bags.

5
25/07/2024

[100 mm] Solid quality, and even gives me room for a second stand!

5
19/07/2024

[29 lb / 13.2 kg] Always steady and getting shots to the perfection.

5
16/07/2024

[29 lb / 13.2 kg] I researched a lot before buying this. I put our heavy canon c500 rig on here and this thing is as smooth as butter. The tilt and drag settings are perfect. We have to remove the feet often to put it on a slider which is one reason i wanted the mid level spreader and the feet are very easy to remove and take off. The tilts and pan are flawless. Great We also bought another head from this system for our Kessler Mini Jib... and it works beautifully.

5
15/07/2024

[29 lb / 13.2 kg] I use this bag to act as a carrying case for my Meopta Meostar 82MM Angled Spotting Scope. Works great. I like the shoulder strap. This case is well made. Obviously, an angled spotting scope with a base plate is an unusual shape but it does fit and is a nice case but it was a close fit for an 82mm scope. Would be great for a tripod case because it is well made.

5
13/07/2024

[100 mm] Bought this case to hold a few standard-sized mic stands w/o booms. Perfect! We are even keeping the mic holders screwed to the stands as there's just enough room to fit. There's a thick divider and straps on either side to secure stands on either side of the divider. This worked really well and keeps the stands from sliding around inside the bag. Threw a few mic cables in (2 20-foot, coiled up), and it's still a good fit! The case is quite lightweight, but made of some tough nylon. It's not very thick, but for me that's a plus. It's not padded, so gear won't be well-protected, but for mic stands, I'll take the sacrifice for losing the extra weight to carry. So I'd sum this up as an inexpensive, lightweight, case for 2 standard mic stands. I suspect you could add the booms, too - there's enough room. I'm not using K&M mic stands, but something very similar. One thing I wish it had: shoulder or back strap(s). The handles are perfect, but I'd love the carry it on my shoulder instead. Still, works for me.

5
13/07/2024

[100 mm] Bought this case to hold a few standard-sized mic stands w/o booms. Perfect! We are even keeping the mic holders screwed to the stands as there's just enough room to fit. There's a thick divider and straps on either side to secure stands on either side of the divider. This worked really well and keeps the stands from sliding around inside the bag. Threw a few mic cables in (2 20-foot, coiled up), and it's still a good fit! The case is quite lightweight, but made of some tough nylon. It's not very thick, but for me that's a plus. It's not padded, so gear won't be well-protected, but for mic stands, I'll take the sacrifice for losing the extra weight to carry. So I'd sum this up as an inexpensive, lightweight, case for 2 standard mic stands. I suspect you could add the booms, too - there's enough room. I'm not using K&M mic stands, but something very similar. One thing I wish it had: shoulder or back strap(s). The handles are perfect, but I'd love the carry it on my shoulder instead. Still, works for me.

5
25/06/2024

[29 lb / 13.2 kg] I bought this tripod to hold my fully-rigged Sony FS-700 with a matte box, external recorder/monitor, batter pack and various sound attachments. I probably have at least 30 lbs of gear sitting on this thing when shooting. The smoothness of the head is unparalleled. The tripod is super solid, great construction, easy to use and it just feels right. I was hesitant to buy this at first because there were no reviews but I feel like I've just found a best-kept secret of sorts in the world of tripods. I made the jump to this professional-grade tripod after years of trying to buy cheaper options. Glad I did! I'll have this pair of sticks for a long time. I'm a huge Acebil fan now!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Acebil Polejib Crane 15.4 Lb Payload

$40,050.00 $53,266.50

Libec Rc-10 Tripod Carrying Case Black

$147.00 $183.75

Acebil Cs-682cm Professional Tripod系统

$6,552.00 $8,386.56

Benro Polaris Tripod Head Carrying Case

$89.85 $126.69

Camera Carrying Case Backpack

$539.85 $691.01

Kowa Cordura Carrying Case For Protection

$210.00 $285.60

Portabrace Glidecam Carrying Case - Black

$882.96 $1,395.08

Epson Soft Carrying Case For Projectors

$90.00 $127.80

Dsan Carrying Case For Perfectcue Mini

$285.00 $404.70

Cyberpower Pr1500lcd Smart App Sinewave Ups

$1,637.85 $2,161.96

Products You May Like

Middle Atlantic 12" Iec Cord 100-pack

$1,404.00 $2,246.40

Shure Slxd3 Xlr Transmitter G58 470-514 Mhz

$1,047.00 $1,382.04

Core Swx Mach4 Micro V-mount Battery Charger

$4,347.00 $5,694.57

Rocstor Rocpro U33 12tb Usb-c Raid Array 2-bay

$2,171.85 $2,866.84

Roland Rac-kc600 Keyboard Amp Cover

$137.97 $205.58

Light & Motion Stella Cl-series Underwater Head

$1,349.97 $1,646.96