The Korg Rimpitch-C2 Acoustic Guitar Tuneris a reliable tuner that attaches to the inside of an acoustic guitar sound hole to offer a more discreet tuning solution than with traditional clip-on tuners. It features a piezo pickup, which quickly and accurately detects the sound of each string, as well as rubber cushions on both the inside and outside to ensure a secure fit and precise tuning. The highly visible and readable LED display indicates which string is being tuned and stands within your natural field of vision, allowing you to glance casually at the tuning meter while you perform in bright rooms or dimly lit stages.

The Rimpitch-C2 supports chromatic tuning for tuning your instrument in any scale or key, great for players who use alternate, open, or dropped tunings. The pitch detection ranges from E2 to E7, as required for acoustic guitars. The calibration function supports a variety of concert pitches to accommodate your playing style. The unit operates up to 30 hours on one fresh CR1620 lithium battery.

Tuner for Acoustic Guitars    Attaches Inside Guitar Sound Hole    Fast and Accurate Pitch Detection    Easily Readable LED Display    Unobtrusive Design    E2 to E7 Detection Range    Chromatic Tuning for Any Scale or Key    Adjustable Reference Pitch    Easy Battery Replacement

• Attaches to the inside of an acoustic guitar sound hole 
• Slim, unobtrusive design is more discrete than traditional clip-on tuners 
• Highly visible and readable LED display is within your natural field of vision
• LEDs with note name indicate which string is being tuned
• Piezo pickup quickly and accurately detects the string sound
• Chromatic tuning in any scale or key, for alternate, open, or dropped tunings
• Pitch calibration function
• Rubber cushions on both the inside and outside of the tuner ensure a secure fit and guarantee accurate tuning
• Intuitive design
• Up to 30 hours of operation on a fresh CR1620 battery
• Easy battery replacement
• Auto power-off function automatically turns the power off after three minutes of inactivity

Related Questions and Answers

Q: 1. hi! i want to know if this is compatible with 220v? or only 110

A: The voltage range is 100-240V, 50-60Hz, so you can use pretty much everywhere on earth

Q: 2. How long is the cable(s)? What is the polarity of the tip/ring? What is the size of the barrel connector?

A: The cable is approximately 3' long. The barrel connector is 2.1 x 5.5mm with a positive tip and negative sleeve.

Q: 3. how to hook up ms 20 to sq1?

A: Well, you can1) Connect 5-pin MIDI out of SQ1 into 5-pin MIDI In on MS20. You cannot transpose with the MS20 kbd2) Set Gate Out polarity to negative on SQ1 - read the manual section on global parameter settings for this. Set Channel A to 8V (Hz/v), connect CV-A and Gate-A of SQ1 to VCO 1+2 CV IN and TRIG In on MS20 respectively. You cannot transpose with the MS20 kbd 3) Set Gate out as in 2 above, but set Channel A to 1, 2, or 5V. Connect Gate-A as in 2 above, connect CV-A to TOTAL input on MS20, and adjust the Freq Mod MG/T.EXT until you get correct scaling - eg if SQ1 is set to 1V output, then a pitch knob should change by exactly one octave from fully CCW to fully CW. The MG/T.EXT knob will be in the 7-8 range, but this is very sensitive - a pain to set!. The benefit is that you can now transpose the incoming sequence with the SM20 kbd.

Q: 4. Will this work on Canon R8?

A: Yes, the Watson CBA-C2 AC Adapter and DC Coupler Replaces Canon LP-E17 Battery can work with the Canon EOS R8.

Q: 5. Can the Korg SQ1 be used to sequence lights for a light show?

A: If your light board can accept the CV/GATE OUT, MIDI OUT or USB MIDI instructions from the KORG, then yes.

Q: 6. can you put in the specs and overview of this item? I can't tell what it is made out of or if all the parts included in the picture are included.

A: The manufacturer is reticent as to the specs and any over all description of their product. We can say that the main material is aluminum and everything you see should be in the box. If not, please contact B&H Customer Service.

Q: 7. how much does the pa300 weight? how about the pa600?

A: The PA-300 weighs 18.4 lb (8.4 kg), the PA-600 is 24.2 lb (11 kg). The product specifications can be viewed by clinking the SPECS tab below the product image on each product page.

Q: 8. Does this work for Canon RP?

A: No. Please review the following item. Canon EOS Webcam Accessories Starter Kit for EOS RP Mirrorless Digital Camera BH #CAEOSWCSKRP • MFR #1425C009 https://bhpho.to/3RHj4kv

Q: 9. What's the different between the korg pa300 and the pa600

A: Some of the main differences for the Korg PA300 vs PA600 would be as follows: 5 vs 7 touch screen. No audio outputs/inputs, MIDI via USB only. 310 vs 360 factory styles, Limited sound/drum kit editing functionality, smaller built in amplifier 13 vs 15 watts.

Q: 10. What is the size of the actual pouch..... NOT the size the pouch come in!! will the 120-300mm actually fit in this pouch??

A: The interior dimensions of the pouch are approximately 6 ½” by 10 ¼”.