The Audio-Technica Consumer AT-VMN95E is a replacement stylus for the AT-VM95E dual moving magnet cartridge. The Bonded Round shank features an aluminum pipe cantilever and produces high channel separation and low distortion for remarkable tonal quality.

For AT-VM95E    0.3 x 0.7mm Elliptical Stylus    Bonded Round Shank Construction

Related Questions and Answers

Q: 1. Will a Audio-Technica 8022 with a Rode dead cat wind screen over it fit in this mount?

A: Yes, the AT8415 shockmount can be used for an AT8022 microphone with a deadcat windscreen.

Q: 2. Will a Rode M3 work with this shock mount?

A: No. See below dimensions: Rode M3.. Physical Dimensions ø: 1.3 x L: 8.86" / ø: 33 x L: 225 mm Weight 0.86 lb / 390 g Audio-Technica AT8415 Specs Microphone Diameters Minimum: 0.50" / 1.27 cm Maximum: 2.13" / 5.4 cm

Q: 3. Can this mic pick a sound from a distance like 5 or 6 feet?

A: Yes, it will still pick up audio at that distance, however for better sound quality try to stay within a 3-5 feet range from the subject you recording.

Q: 4. How is this powered may I ask please? Does this convert a mic terminated with a 4 pin to work with XLR? Will I need to phantom power afterwards?

A: The device requires 48V phantom power on the XLR side. I'm using it with a Zoom H4n, with phantom power enabled. I asked this same question to the audio-technical people, and they said that you need to send phantom power to the microphone through the AT8539 and that can come from either a recording device such as a mixer (the H4n, in my case) or an external phantom power supply, such as the AT8801. Hope this helps.

Q: 5. Does this "require" phantom power?

A: No, the Audio-Technica AT8202 does not require phantom power, although it can be used with phantom power without problems.

Q: 6. Are these synthetic leather?

A: Yes, the Dekoni Audio Platinum Memory Foam Replacement Earpads for Audio-Technica ATH-M50x (Pair, Black) are made with high quality vegetarian synthetic leather.

Q: 7. How do you 'thread' the microphone through the bands if it's too thin (e.g.. Rode NTG4+)?

A: I would try wrapping it in cloth, preferably cotton, where the bands contact the mike.

Q: 8. Would it fit Rode NT4?

A: You may have to thread the mic through the bands by weaving it at both pairs of bands, instead of sticking it straight through. I love this shock mount and have used it for years, on all kinds of mics.

Q: 9. What Country is this microphone made in?

A: According to the information we have, our current inventory's Country of Origin is Japan. Please be aware this can change over the product's production life without notice.

Q: 10. will the sennheiser 600 work?

A: Yes, the Audio-Technica AT8415 Low Profile Universal Shock Mount is compatible for use with the Sennheiser MKE 600 Shotgun Microphone.