Give your camera solid feet to stand on with the OZEN 6AL2HDS 75mm Aluminum Tripod & Agile 6S Headfrom OZEN. Designed for use with a separately available 75mm fluid head, this two-stage tripod supports a payload of 55 pounds and offers working heights ranging from 24 to 61" using the included, removable MLS100 mid-level spreader. If you need to go even further up, you can replace the included spreader with the separately available Contender heavy-duty mid-level spreader, which gives you a range of 24 to 65".

For greater rigidity, the 75AL2HD's anodized aluminum leg tubes are pin-secured to their anchors—no glued joints. Highly visible flip brake levers are used to lock the legs into place. Moreover, the 75AL2HD comes equipped with deep-tread rubber feet for better traction on smooth surfaces.

75mm 2-Stage Heavy-Duty Tripod    Agile 6S Fluid Head    Counterbalanced Payload: 2.2 to 17.6 lb    8-Step Counterbalance    3/3 + 0 Pan/Tilt Fluid Drag    MLS100 Removable Mid-Level Spreader    Height Range with MLS100: 30.8 to 67.8"    With Optional Contender: 30.8 to 71.8"    Deep-Tread Rubber Feet    SoftCase 100 with Strap & Internal Pouch

Payload capacity of 55 pounds

Removable MLS100 mid-level spreader

Deep-tread rubber feet

Anodized aluminum tubes are pinned to their joints, not glued

Flip-lock brakes are operator-adjustable for wear

Related Questions and Answers

Q: 1. Can the Fluid Head ball mount be removed in order to use it on a slider?

A: No. To be able to use this fluid head on a slider, you would need to mount it into a riser, such as the one illustrated here https://bhpho.to/2WTVVki

Q: 2. what is the weight capacity of the tripod legs only?

A: Unfortunately, specs for the EK-40AAM tripod legs aren't publicly available any longer directly from E-Image, but I can confirm a range of between 77-88 lb. as the recommended maximum payload for them based on their design and what notes I have from the manufacturer and previous product managers.

Q: 3. What size is the thread on this pan bar?

A: That's not specified by the manufacturer at the moment.

Q: 4. Are the mid-level spreader and rubber feet from the Sachtler Speed lock 75 CF compatible with this model? I'm also wondering if it will work with an FSB 6 fluid head. Thank you!

A: The Sachtler 75/2 Aluminum Tripod (75mm) (B&H# SAS20360002) would not be considered compatible (ideal) with the mid level spreader from the Sachtler Speed lock 75 CF, but this one is: Sachtler Mid-Level Spreader 75 (BH# SAS20361200): https://bhpho.to/3x3PGOx Yes, the Sachtler FSB 6 MK II Fluid Head with Sideload Mechanism (BH# SAS20650001) is compatible with the Sachtler 75/2 Aluminum Tripod (75mm) (B&H# SAS20360002): https://bhpho.to/3j5OeDa

Q: 5. I see 2 different mid-level spreaders. Does this come with the barrel twist or lever?

A: The OZEN 100CF2HD 100mm Carbon Fiber Tripod uses flip brake levers.

Q: 6. Is the pan handle included or is that separate?

A: Yes it is. A Pan Handle is included with this tripod system.

Q: 7. What's the difference between this tripod and the ACE 72/2 CF? Are they the same?

A: Currently there is available the Sachtler Ace 75/2 Carbon Fiber Tripod (75mm), which is a Carbon Fiber or CF tripod system. Currently we do not have an ACE "72/2 CF". This is the same tripod that comes with the Sachtler System Ace XL MS CF system.

Q: 8. What are the dimensions of this handle when fully collapsed?

A: The OZEN Extending Pan Bar (PB-2) The dimensions of the handle are - From the front of the rosette to end of the handle, it is 15” long. The extension adds up to 7 ½” inches to the PB-2’s total length when extended.

Q: 9. can you remove the head and put on a short glide?

A: The short answer is yes.You will need an adapter. I suggest either one of the attached adapters seen below.The Manfrotto has a low profile and is very solid. However, there is no leveling possible, for it holds the head in just one position. The ikan adapter is more expensive, rests the head and camera about 2 higher. However you can level with it.

Q: 10. Does the head have drag control steps?

A: This GH08 FLUID HEAD (E-IMAGE) head has fixed drag control for pan and tilt.