This 3 RU tall Lowell Rackmount Steel Utility Drawer 3 RUfrom Lowell Rackmount Steel Utility Drawer 3 RUis made from 16-gauge steel. It is fully welded for strength and has a black powder epoxy finish for long life. The drawer mounts to the front of 19" racks with standard E.I.A. spacing. Supporting up to 50 pounds, the drawer features internal ball-bearing slides, providing smooth operation.

At the back of the drawer is a plastic bushing that allows for wire/cable pass-through, and an integral handle provides for an effective drawer pull. The drawer is made in the USA.

For 19" Wide Racks    Standard E.I.A. Spacing for Mounting    50-Pound Load Capacity    Rear Bushing for Cable Pass-Through    Integral Handle    Made in USA

The rear plastic bushing allows for cable pass-through with a total diameter of 1.06"

Please note that this drawer does not have a provision for locking

Please note that this is just for the drawer and does not includes any mounting hardware

Related Questions and Answers

Q: 1. Is the weight really 24 lbs? I'm hoping its a specs misprint.

A: It is most certainly a misprint since the actual packaged/shipping weight is 23 lbs. Unfortunately Gator doesn't publish the actual weight. Judging by the weight of other similar 3U drawers, it should be around 17-20 lbs +/-

Q: 2. What is the minimum depth of rack this drawer requires? Can it be mounted in a shallow rack-case? (Eg. Gator G-PRO-4U-13?)

A: Yes, it will. The drawer is just under 10" deep.

Q: 3. What is the depth of this drawer?

A: The Lowell Manufacturing UDE-214 Rackmount Steel Utility Drawer has an overall depth of 15.07" (383mm) and an interior depth of 14.5" (368mm).

Q: 4. Can you lock/latch this rack closed so it doesn't open when in transit?

A: No, the iStarUSA WA-KBR-1U 1 RU Sliding Drawer does not lock. For a 1U locking drawer, consider the On-Stage RDL1000 Locking Rack Drawer (B&H # ONRDL1000) or the On-Stage RDLS1000 1 RU Locking Rack Drawer (B&H # ONRDLS1000).

Q: 5. Do these rack drawers have universal keys?

A: Yes, the lock for the Samson SRK-DR2U Universal Rack Drawer does have a universal key that will work with other Samson Rack Drawers and possibly other similar rack drawers from other manufacturers.

Q: 6. Does this drawer have any kind of friction fit when closed, requiring a tug to open, or would it freely slide open when closed?

A: According to the manufacturer, "[The On-Stage RDLS1000 1 RU Locking Rack Drawer] uses[s] a plastic latching mechanism to keep drawers in place, pushing down on the latch on the front of the drawer allows you to open the drawer. That being said, if held at an angle and especially with any additional weight inside the drawer it’s fairly easy for that latch to pop open and the drawers will move. Locking the drawers would be the only way to truly secure them in place if at an angle."

Q: 7. Can you confirm if it's 30″ Rack Depth?

A: No, this Pelican Super V 9U Rack Mount Case has a rack depth of 24". The Pelican Super V (9 RU) listed as B&H # PESUPERV9U30 is the model that has a rack depth of 30".

Q: 8. What the maximum depth (rack rail to rack rail) permitted?

A: The max depth of a NAS that those rails can compensate for are NAS units whose depth is 21.02 inches.

Q: 9. Is it 19'' rackmount? because it measures 21 inch in the description

A: The Odyssey ADFRD02 Locking Rack Drawer (2 RU), B&H # ODADFRD02, is a 19" 2 RU rackmount—the additional 2" is accounted for by the rack ears and the drawer front overlap.

Q: 10. How do I attach this Gator Rackworks 2U rack drawer to my rack case?

A: The Gator 2U drawer features built in rack ears and attaches with standard rack screws similar to other rack mountable equipment.