Convert a single HD HDMI signal for highly efficient SMPTE ST 2110 IP transmission using the HDMI to SMPTE ST 2110 Video Audio Converter AJA IPT-10G2-HDMIfrom AJA. Supporting up to 1080p60 video, this mini-converter provides two interfaces for use with separately available 10 GbE SFP+ modules. Hitless SMPTE ST 2022-7 switching for critical transmissions is offered via the redundant interface design.

The IPT-10G2-HDMI Mini-Converter processes up to eight channels of SDI-embedded audio or analog stereo audio input via its RCA inputs. Control options include a 1 GbE RJ45 LAN socket for customizable, browser-based control on any platform and on REST clients and a USB Mini-B port for initial configuration and updates.

Versatile power features include a universal power supply with a locking power connector and international plug adapters and a separately available D-Tap cable for powering the unit via battery on remote locations. The AJA IPT-10G2-HDMI Mini-Converter features a durable, fanless housing that is compact enough to fit directly on your monitor or camera rig.

HDMI Input to SMPTE ST 2100 IP Output    Supports up to 1080p60, 4:2:2, 10-Bit    1 x HDMI Type A 1.4b Input    2 x 10 GbE SFP+ Cages    Hitless ST 2022-7 Switching    Supports up to 8-Channel Embedded Audio    Configure & Update via USB Mini-B    Includes 5-20V Worldwide Power Supply    Compact & Durable Fanless Design

• Converts an HD HDMI source to highly efficient SMPTE ST 2100 IP transmission
• Two 10 GbE SFP+ cages for media LAN enable redundant, hitless switching
• Single HDMI Type A input supports up to 1080p60, 4:2:2, 10-bit YCbCr video
• Single 1 GbE RJ45 LAN control socket
• Status lights on SFP+ and RJ45 sockets
• Compact and durable fanless design
• Full 10-bit pixel processing pipeline
• Dual RCA analog audio inputs
• Single USB Mini-B port for initial configuration and updates
• Built-in server enables complete control from any web browser
• Customizable control via AJA REST API

Related Questions and Answers

Q: 1. Is the composite output aspect ratio 4x3 or 16x9?

A: The output aspect ratio is 4x3, and is a standard NTSC analog 640 horizontal by 480 vertical lines (interlaced), which can be displayed by any device with a composite (yellow RCA connector) input. The Kanex will accept an HDMI 480, 720, or 1080 vertical line input and downscale it to 480 lines.However, the output image you see depends on the format of the HDMI input and the formatting capabilities of composite display. Formatting refers to the ability to crop, fill, or distort the display. Since a 16x9 format will not directly fit a 4x3 display, one of these 3 options must be used: Cropping removes left and right side portions of the image to fill the display. Distortion squeezes in the sides of the image to fill the display. Filling adds black bars at the top and bottom of the image (Letterbox mode) to fill the display. The Kanex does no cropping or distortion; with a standard 16x9 HDMI input signal, it displays in Letterbox mode. None of the image is cropped or distorted, but instead filled to fit the 640x480 (4x3) format. In my situation, I pull 16x9 video from a PC, edit on an old composite 4x3 DVR, and display on an old 4x3 CRT. Output quality is good with very good color. I do notice some brightness and contrast shifts from the source, which need touching up on the display unit or color corrector if you have one.Hope this helps!

Q: 2. Will this output to both HDMI and SDI at the same time? I am looking to record a computer's feed to an AJA IO4k via SDI while also passing the feed through to a projector via HDMI.

A: Simultaneous output through HDMI and SDI is possible.

Q: 3. Where is it made?

A: The Country of Origin for this product is China.

Q: 4. How many frames of latency does this converter introduce?

A: About 1 to 2 lines of scanning. Visit the document below: https://www.aja.com/assets/support/files/2374/en/AJA_Path_Delays_v02.2.pdf

Q: 5. Will it pass HDCP material?

A: The AJA HDMI to SD/HD-SDI Video and Audio Converter B&H # AJHA5Q MFR # HA5 will not pass HDMI video with HDCP copy protection.

Q: 6. Will this output 1920x1080I @59.94?

A: Hi Casey,I bought this hoping that it would output 1080i so that I could convert the 1080p from my GoPro 4 for the ATEM studio. I returned it because I could not get it to do so, it passed through the 1080p and the GoPro was again not recognized by the ATEM studio.

Q: 7. Does this work with HDMI 24p input?

A: No, it needs a HDMI 30i signal.

Q: 8. Does AJA Hi5-12G 12G-SDI to HDIMI 2.0 Mini Converter support Dolby Vision?

A: AJA does have plans to release a future firmware update supporting Dolby Vision for the AJA Hi5-12G 12G-SDI to HDMI 2.0 Mini-Converter, but unfortunately it hasn't been released yet.

Q: 9. I just bought this, but it's not working with a 1280x800 resolution. Any advice?

A: Jodan, I had the same problem you experiancing. I did not keep my I returned it. It was not useful to me.I wish you luck.

Q: 10. has anyone powered this unit with USB power instead of plugging it into the wall? Does it need to be plugged into the wall?

A: Hi Mark. The unit requires a 5 volt DC source at 2 amps. Any power supply of 5 volts DC with at least a 2 amp rating will power the unit. So, if you have a USB power supply of 5 volts that can supply the amp rating it should work. Please be aware of the polarity of the power supply you are using. And no, I have not tried powering the unit from a USB port or power supply, but it is a good question.