Designed for TV, broadcast, and film applications, the white CHROMA-Q Studio Force II 48 White LED Lightfrom CHROMA-Q Studio Force II 48 White LED Lightis a tunable, homogenized, white light LED fixture with variable color temperature from 2800 to 6500K. Plus/Minus green shift control allows for refined tuning of the light output. Aside from the tunable white, the Studio Force II has the ability to produce deep saturated colors when needed.

For additional flexibility and creative looks, the fixture's cells can be controlled individually, in groups, or all together as one single light source. The high-efficiency light engine of the Studio Force II is capable of delivering up to 24,000 lumens. A built-in touch display enables you to adjust the PWM frequency for flicker-free operation and to set up DMX addressing, as well as to select control modes and customize settings.

The Studio Force II is equipped with a tool-less locking mechanism for easy adjustability. A separately available LumenRadio wireless receiver can be added to the Studio Force II for remote DMX control.

2800-6500K Variable White, CRI up to 95    Up to 24,000 Lumens    Smooth, Linear Dimming    Plus/Minus Green Shift Control    Adjustable PWM Frequency    Built-In Color Touch Display    DMX Control via 5-Pin XLR I/O    Daisy Chaining via powerCON TRUE1 I/O    Tool-Less Locking Mechanism    LumenRadio Receiver Available Separately

Full-spectrum tuneable white light engine

High-intensity homogenized output

Smooth uniform wash

2800 to 6500K CCT variable white

Plus/minus green shift control for varying hue by moving along the green-magenta axis orthogonal to the color temperature axis in accurately defined increments

High output of 24,000 lumens

Smooth dimming

Suitable for TV broadcast and film

Floor, wall, or truss mountable

powerCON TRUE1 input and output for easy daisy chaining of fixtures

CRMX connection for wireless LumenRadio receiver (available separately)

Color touch display for easy navigation through addressing, modes, and settings

ColorSure technology for high fixture-to-fixture consistency

Hidden quick release lever for tilt adjustment allows side-by-side fixture placement without gaps

Range of optional accessories available separately

Related Questions and Answers

Q: 1. Looking at doing Portrait's with these lights. How do they compare to the cube lights ? If I was doing portrait's with them ( cube x 2 lights ) as I need a good portable lighting system that is compact.

A: If comparing these to a Lume Cube LED light, they would have roughly the same output, but there wouldn't be color temperature control built into the Bescor lights.

Q: 2. Does it mount in Canon Rebel T6s without adapter ? Thanks for help

A: It will mount in any standard shoe mount receiver. Mounts on all my Canon cameras. But I do not have a T6s camera.

Q: 3. Is there any chance I can make this: a href= http://www.bhphotovideo.com/c/product/887736-REG/impact_ff_s4_4_socket_fluorescent_fixture.html target= _blank http://www.bhphotovideo.com/c/product/887736-REG/impact_ff_s4_4_socket_fluorescent_fixture.html/a work with this a href= http://www.bhphotovideo.com/c/product/889685-REG/impact_lb_o_s_luxbanx_small_octagonal_softbox.htm target= _blank http://www.bhphotovideo.com/c/product/889685-REG/impact_lb_o_s_luxbanx_small_octagonal_softbox.htm/a ?l

A: No, the Impact Luxbanx Small Octagonal Softbox attaches to lights using a speedring. The Impact 4 Socket Fluorescent Fixture does not work with speedrings. There are two dedicated softboxes that work with it.Impact 50 x 70 cm Softbox for Fluorescent Fixtures B&H # IMFFSB70 MFR # FF-SB70 and Impact 50 x 50 cm Softbox for Fluorescent Fixtures B&H # IMFFSB50 MFR # FF-SB50.

Q: 4. Does this fit Bowens mount softboxes?

A: Unfortunately, no, the Impact 4 Socket Fluorescent Fixture is not compatible for use with Bowens-mount softboxes. The Impact Softbox for Fluorescent Fixtures (20 x 27.5"), B&H # IMFFSB70, would be the dedicated softbox compatible for use with the Impact 4 Socket Fluorescent Fixture. The Impact 4 Socket Fluorescent Fixture cannot use Bowens speed ring adapters.

Q: 5. Are the lamps included?

A: Lamps, stands, and softboxes are not included with purchase.

Q: 6. Is the Impact FF-S4 light kit TOO LOUD for video? One reviewer says that it is "loud as heck" and not usable for video. Since I want it for video, I don't want it if it generates noise.

A: The CFL lamps do not have fans and make no noise.

Q: 7. What in line dimmer is compatible with this?

A: The LED in this kit are not compatible with a inline dimmer.

Q: 8. What is the overall width of this unit, at the widest point? No details are provided. I want to custom fabricate a mount plate to fit the unit in some existing softboxes I have.

A: At its widest point, this fixture would measure 6 .

Q: 9. Has anyone used LED bulbs as replacements for the ones included? My local hardware store has 5,000K LED bulbs and they even will use less power (13W) compared to the ones supplied (26W).Also, the description say the fixture is only rated for 200W total. But the box it comes in says 600W total or 150W per socket. Has anyone received the 600W fixture and used bigger bulbs?

A: It can only support a maximum of 200 watts.You can use led lamps as long as they fit and the bulbs do not exceed 50 watts each.

Q: 10. In the pictures provided for this product it shows the product being used with a soft box. Is that soft box included with this product along with the stand? The portion where it says In the box provides no information regarding either or.

A: Hi John,Yes, the Box set I got came with the soft box and the stand. Hope that helps.Thanks.