Your Scorpio Mixer-Recorder from XL-WPTA4 AC to DC Power Supply for Scorpio Mixer-Recorderalready comes with the XL-WPTA4 AC to DC Power Supply, but if you lost your original PSU or just need an extra one, this is the correct model for you. The XL-WPTA4 is a 60W inline AC-to-DC power supply with a TA4F DC connector for the Scorpio, and a detachable IEC power cord for the power socket.

PSU for Scorpio    60W Inline AC-to-DC Power Supply    TA4F DC Connector    Detachable IEC Power Cord

Related Questions and Answers

Q: 1. Will this work with the Canon 90D?

A: Yep! It absolutely will!

Q: 2. Will this work with Macbook Pro 15" 85W power adapter?

A: If you are using the ONsite D-Tap to AC Power Supply (220V) with the Tether Tools ONsite D-Tap Battery with V-Mount (US) #TESDBV150 you will not be able to fully power your Macbook Pro 15" 85W. The USB port on the battery is governed to prevent overheating and will not supply a steady power supply to the AC Power Supply. If the computer is idle, the AC adapter and battery will charge the computer, but when the computer is in use and processing, the battery may throttle down to prevent overheating and will not charge the computer. Once the heavy processing is done, the AC adapter and battery will return to normal operation.

Q: 3. Will this work with the Sound Devices MM-1?

A: YES

Q: 4. Will this work with a EOS 6D MarkII?

A: Hello! Yes, this will work with your EOS 6D MarkII

Q: 5. Is this compatible with the sound device 664 & 688.

A: Hello, yes the XL-WPH3 is compatible with the 633, 688 as well as the 633 recorder. It works with any Sound Devices product that uses a four pin Hirose connector for power. Thank you

Q: 6. How long is the cord from the dummy battery to the connector?

A: The cable length on the dummy battery is 36'' long. The connector cable is 55'' and the Ac cable is 50'' long.

Q: 7. How many volts and how many amps does it output?

A: Hi Taylor, the MX-Charge power supply outputs 7.5W, 1.5A. If you are looking for a 3rd party solution be advised not all USB-C power supplies will run the MixPre series in full power mode. To avoid low-power mode, the MixPre requires a USB power source that flags that it can output 7.5W (1.5A). Many USB power sources can output 7.5W but do not flag that they can do so - these will cause the MixPre to operate in low power mode (maximum two phantom mics, no HDMI in). Use the following for full power:MX-Charge accessoryDual USB-A to USB-C cableApple USB-C power adapter New MacBook Pro USB-C portAny USB power source that flags that it can output 7.5W I hope this is helpful!

Q: 8. Will this replace or work in place of the: Canon AC-E6N AC Adapter and DC Coupler DR-E6 Kit?

A: Yes, this adapter kit is a good alternative to the Canon AC-E6N AC Adapter and DC Coupler DR-E6 Kit.

Q: 9. Is this compatible with the MixPre-6 II, in combination with the MX-HIROSE?

A: Yes, the Sound Devices XL-WPH3 45W DC Power Supply for Sound Devices Recorders and Mixers is compatible for use with the Sound Devices MixPre-6 II Field Recorder when used in combination with the Sound Devices MX-HIROSE Hirose DC Input Sled for MixPre, MixPre-M & MixPre-II Mixer-Recorders.

Q: 10. Will this work with a U.S. grounded cable?

A: It will not, this model is for 220V international voltage. For the US you will need BH #TESDAC110 instead. https://bhpho.to/2VHgpMJ