You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Miller 75 Sprinter Ii 2-stage Carbon Fiber Tripod

Miller 75 Sprinter Ii 2-stage Carbon Fiber Tripod
  • Product Code: eq63815
  • Availability: In Stock

$2,930.58 $3,604.61

The Miller 75 Sprinter II 2-Stage Carbon Fiber Tripodis a quick-setup solution for a tripod head with 75mm ball base. Its lightweight, dual-action flip locks and rigid carbon fiber construction allow for durability without compromising usability in ENG, EFP, and other pro video applications.

Unlike many traditional multistage designs, both flip locks are located on the same section for easy reaching, no matter the height setting. The feet have integrated steel spikes to add stability on rough or uneven terrain. The fast setup is complemented by an in-line carry handle for portability on set or in the field. Compatible mid-level spreaders, rubber feet, and dollies are available separately.

For Heads with 75mm Ball    Two-Stage, Three-Section Legs    Supports up to 66.1 lb    23.6 to 60.4" Height Range    Carbon Fiber Construction    Outfitted for Mid-Level Spreader    Built-In Carry Handle

Key Specs
Head Mount Type75 mm Bowl
Primary MaterialCarbon Fiber
Maximum Working Height60.4" / 153.42 cm
Minimum Working Height23.6" / 59.9 cm
Closed Length27.6" / 70.1 cm
Weight7 lb / 3.18 kg
Legs
Head Mount Type75 mm Bowl
Primary MaterialCarbon Fiber
Leg LockFlip Lock
Leg Sections2
Independent Leg SpreadYes
Leg PositionsLocking 3 Positions and Continuously Adjustable
Foot FeaturesSpiked
General
Maximum Working Height60.4" / 153.42 cm
Minimum Working Height23.6" / 59.9 cm
Closed Length27.6" / 70.1 cm
Bubble LevelNo
Spreader SupportMid-Level (Not Included)
Weight7 lb / 3.18 kg
Packaging Info
Package Weight12.6 lb
Box Dimensions (LxWxH)37 x 12.75 x 11"

Two-stage carbon fiber tripod for heads with 75mm ball

Maximum payload up to 66.1 lb

Compatible with separately available mid-level spreader

Height extends from 23.6 to 60.4"

Built-in carry handle for portability

Related Questions and Answers

Q: 1. Does the head accept a standard Manfrotto 501 sliding plate?

A: We're afraid not. This head uses the Miller 1204 style plate. https://bhpho.to/2Use2dY

Q: 2. Does this tripod come with a strap? If not, does it come with the rings to attach a strap?

A: Yes, This Miller tripod kit comes with an included strap.

Q: 3. What is the lowest height that this tripod will go?

A: The lower the 1589 Sprinter II will go is 26.4 .

Q: 4. Does this include a bag or case with purchase?

A: No this does not. For a tripod by Miller, I would want to have a case of equal quality. HPRC 6400TRIB Wheeled Hard Case for Tripods with Soft Interiors Kit (Black) B&H # HP6400WTRIB.

Q: 5. Please let me know which Miller tripod case comes with this tripod Miller Air Carbon Fiber Tripod System B&H # MI3005 MFR # 3005I don't see a link. Also, on Miller Sticks I have a Sachtler DV6 head. I measured about 33 from the head to the feet. I'm guessing a 35 tripod case would be fine. That's why I would like ton know which Miller tripod case this is? I have the same Miller Sticks as I mentioned above. Thank you Jimmy

A: For future reference, please look under the Accessories tab for Bags & Cases. Of the seven we offer, I would suggest these based on economy to best choice to luxury. For budget: Ruggard Deluxe Padded 35 Tripod Case (Black) B&H # RUBD3035. For rugged airplane travel: SKB Roto-Molded Tripod Case with Wheels (37 Tall) B&H # SK1SKBR3709W For luxury: Porta Brace TLQB-39XT Quick Tripod/Light Case (Black) B&H # POTLQB39XT.

Q: 6. it says it has an 88LB capacity, but amazon has it rated for 9LBS?

A: Hello,My manager sat on the bowl, and he weighs probably about 120 lb. Amazon is quite wrong, or may be referencing the recommended payload of a kit, which bases max load off of the head. Recommended payload is 88 lb., but it can physically exceed that, though it won't be working optimally and runs the risk of a slip or collapse.

Q: 7. Does this tripod come with a bag?

A: It doesn't but its worth the price.

Q: 8. Does the tripod work with Canon 5D Mark III?

A: yes

Q: 9. I'm planning to purchase this kind of tripod but do I need to purchase Manfrotto 520BALL 75mm Half Ball too in able for me to mount my Manfrotto 502AH Pro Video Head with Flat Base? Does it included in the package?

A: The Manfrotto 520BALL 75mm Half Ball is not included with this tripod. You will have to purchase it as well to mount the 502AH head on it. https://bhpho.to/2P4qQZm

Q: 10. Would this tripod work well with a mediumly rigged FS7 + Sony 18-110mm zoom lens?

A: This tripod has a 22 pound load capacity. It will depend on what is in your full rig, but it is certainly possible to use this with an FS7 depending on all of the other accessories you have. You will just need to keep the load at or below 22 pounds.

23/09/2024

[Flip Lock] I use this for documentary filmmaking. The head is completely smooth and well built. The legs are very stable and easy to use.

5
04/09/2024

[Spiked] This is not a tripod package for a lightweight camera. So putting just a DSLR, no rails, cage, monitor, FF, Mattebox, etc.., on it is under-kill as this tripod really doesn't start to perform until there is weight upon the head. If your heaviest setup is under 10LBs then find a different tripod as you won't be happy with this as the head will be fighting itself when panning and the legs will lift up. The pan and tilt friction knobs will cause a shudder and squeak if you don't have enough weight upon the head when using them...however when weight of the proper range is put atop the tripod head, and the counterbalance is properly selected, the pan and tilt friction boost knobs do wonders at increasing the smooth motion. A good rule of thumb regarding the counterbalance selection switch is 12. If it's under 12 choose 1, if it's over twelve try 2. The legs seem well made and sturdy. This tripod can go very high and also very low...which is great for those dutch angles. This does very much seem like a tripod system you could take out into the field, forest, mountains and streams and come back happy with.

5
04/09/2024

[Spiked] This is not a tripod package for a lightweight camera. So putting just a DSLR, no rails, cage, monitor, FF, Mattebox, etc.., on it is under-kill as this tripod really doesn't start to perform until there is weight upon the head. If your heaviest setup is under 10LBs then find a different tripod as you won't be happy with this as the head will be fighting itself when panning and the legs will lift up. The pan and tilt friction knobs will cause a shudder and squeak if you don't have enough weight upon the head when using them...however when weight of the proper range is put atop the tripod head, and the counterbalance is properly selected, the pan and tilt friction boost knobs do wonders at increasing the smooth motion. A good rule of thumb regarding the counterbalance selection switch is 12. If it's under 12 choose 1, if it's over twelve try 2. The legs seem well made and sturdy. This tripod can go very high and also very low...which is great for those dutch angles. This does very much seem like a tripod system you could take out into the field, forest, mountains and streams and come back happy with.

5
17/08/2024

[Carbon Fiber] The best thing about this combination has to be the legs. They extend out almost horizontally, enabling you to set the camera really low - haven't seen this feature on other tripods. Head is great, of course, very smooth, no jitters.

5
17/08/2024

[Carbon Fiber] The best thing about this combination has to be the legs. They extend out almost horizontally, enabling you to set the camera really low - haven't seen this feature on other tripods. Head is great, of course, very smooth, no jitters.

5
05/08/2024

[75 mm Bowl] This thing is a beast. I can't get over how well it's designed. I have Bogen tripods that are twice the weight and seem flimsy. This thing is light and solid as a rock. The head is smooth as silk. I originally ordered this tripod because of it's ability to set low to the ground (so I could use it with my Indislider), but now I am replacing all my Bogen tripods with this beast. Bogen = a piece of junk compared to this rig. Worth every penny, trust me.

5
04/08/2024

[75 mm Bowl] We had 5, bought 8 more.

5
02/08/2024

[2] There are many reviews on this tripod, but bottom line: it is excellent! It's reasonably priced and can accommodate a pretty heavy rig. I'm impressed. I love the next to nothing weight as well!

5
02/08/2024

[75 mm Bowl] For a compact tripod, I'm really pleased at the range of height I get (from hi-hat low, to very high). Easy for a one-man band. I don't miss the spreader. Fluid head is great for my approximately 20b FS7 rig.

5
02/08/2024

[75 mm Bowl] For a compact tripod, I'm really pleased at the range of height I get (from hi-hat low, to very high). Easy for a one-man band. I don't miss the spreader. Fluid head is great for my approximately 20b FS7 rig.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Miller Sprinter Ii 2-stage Carbon Fiber Tripod

$5,494.23 $7,362.27

Miller Sprinter Ii 1-stage Alloy Tripod

$2,711.88 $3,932.23

Miller Sprinter Ii 2-stage Alloy Tripod

$4,157.73 $6,028.71

Miller Versa Cxv2 Head 75 Sprinter Ii Tripod Kit

$9,717.57 $12,244.14

Miller Versa Cxv2 Head, 75 Sprinter Ii Tripod Kit

$8,966.70 $13,988.05

Miller Versa Cxv6 Head, 75 Sprinter Ii Tripod Kit

$10,606.95 $14,001.17

Miller Arrowx 5 Sprinter Ii Aluminum Tripod System

$20,280.78 $31,029.59

Miller Solo-q 75 Carbon Fiber Tripod Seo Title

$2,238.03 $2,976.58

Products You May Like

Xlr3f To 3.5mm Ra Trs Breakout Cable - 18"

$186.00 $290.16

Huion Keydial Mini Compact Shortcut Remote

$149.97 $187.46

Liebert Gxt5-500lvrt2uxl Ups By Vertiv

$2,613.60 $3,423.82

Vicoustic Vicloud Vmt Flat Petal Beige 4 Pieces

$3,687.00 $5,677.98

Msi B550 Gaming Gen3 Am4 Atx Motherboard

$299.97 $422.96

Tiffen 85b/nd 105mm Filter - Coarse Combination

$1,139.85 $1,379.22