The RC10 Studio Reflection Microphone Filter by Samson is an optimal solution for recording vocalists or voiceover artists in less than stellar acoustic spaces. Use the RC10 in a home studios, untreated rehearsal spaces, or for voiceover applications.

Housed in a deep and sturdy semicircular aluminum shell, the acoustic foam absorbs unwanted reflections to the microphone. The resulting drier and clearer recordings can then be treated during mixing or film post-processing.

The filter mounts onto a microphone stand, and the mount brackets allow you to easily adjust its height and depth for precise microphone placement. Standard 5/8"-27 threaded adapters fit most microphone stands, clips, and shock mounts.

Lightweight, Portable Reflection Filter    Compact Microphone Isolation Solution    Absorbs Unwanted Noise & Reflections    Aluminum Framing    Steel Filter Mount    Mounts Directly onto Mic Stands    Easily Adjust Depth and Height of Shield    Adapters Fit 5/8" Mic Clip/Shockmounts    Includes all Mounting Hardware

• Lightweight, portable microphone reflection filter
• Single-panel construction
• Industry standard acoustic foam interior
• Aluminum framing
• Steel filter mount, including mic clip/stand attachment piece
• Filter mount offers up to 6.5" of vertical reach
• Mic clip/stand attachment piece offers 8.75" of forward/backward reach
• 5/8"-27 mic clip/stand threading

Related Questions and Answers

Q: 1. will this work with a Blue Yeti? would I need any adapter?

A: Yes, you can mount the Blue Yeti microphone on the Auray RFMS-580 tripod stand. The Yeti has a standard 5/8" mounting thread on the bottom which can be attached to microphone standard or broadcast arm. To keep the mic isolated from noise and vibrations, the manufacturer recommends using the Blue Radius III Shockmount (B&H# BLRADIUS3) to mount the Yeti first, then attaching the shockmount to a mic stand or broadcast arm.

Q: 2. Hello, is this mic unidirectional or omnidirectional?

A: This is a unidirectional mic

Q: 3. Can this support a Shure MV7 microphone with room to maneuver up and down and allow room for the cord off back?

A: Yes, the Marantz Professional Sound Shield Vocal Reflection Filter support the MV7 microphone, however, you will have to slide the microphone attachment bar all the way to the front, there will be some room for adjustment up or down. The cord will go under the filter.

Q: 4. Can you set this on a desk? Do I see that a microphone stand is part of the system?

A: Yes. Per highlights on Webpage: Compact and lightweight (at 6.6 lb), the Sound Shield can be mounted directly on a tabletop using three removable aluminum feet or fastened to a mic stand using the built-in threaded insert.

Q: 5. Does this Microphone work with Samsung Galaxy S8 with the adapter for USB-C? Thank you

A: This USB microphone will not work with your smartphone. Plugs directly into any computer with a USB input, no drivers required.

Q: 6. Is this stand good for the MXL 770? Can I use it for a home studio?

A: It will work with your MXL770 in a home studio environment, but this stand is a little bulky, and you might want to consider using a stand with a boom arm so that you can position the mic a bit better. https://www.bhphotovideo.com/c/product/755877-REG/auray_ms_5230f_tripod_microphone_stand.html

Q: 7. Can this support the MXL RF-100 Reflection Filter?

A: Yes, the Auray RFMS-580 Tripod Stand can be used to support the MXL RF-100 Reflection Filter.

Q: 8. As this is a Studio Stereo Mic. Does that mean that, when wearing headphones, you can hear the sound from either side of your head? E.g. If I click my fingers on the right hand side of the mic, I'll hear the click in my right ear, not my left or visa versa?

A: The Meteor Mic is a mono microphone with no separation between right and left.

Q: 9. How long are the tripod legs on this stand?

A: Each leg is 15 inches from floor to base

Q: 10. Is this mic compatible with Windows 10?

A: Yes. I use it with my windows 10 desktops and laptops without any issues