Bescor Xlr5Mm 4-Pin Xlr Male To Male Cord 5Ft

Bescor Xlr5mm 4-pin Xlr Male To Male Cord 5ft

Product Code: eq64120
Availability: In Stock

$83.97 $129.31

Qty

19 reviews Write a review

Description
Reviews (19)

This 5' long Bescor XLR5MM 4-Pin XLR Male to Male Cord 5ftis constructed with 20-gauge wire and is ideally used as a power cable for 12 VDC powered devices. It is wired in accordance with industry standards connecting pins 1-to-1 and 4-to-4 on each end, and it supports a 10-amp draw at 30 VDC. The insulating jacket on the cable is oil and solvent resistant, and it has an operating temperature range of -22 to 158°F.

4-Pin XLR Male to 4-Pin XLR Male Flexible, 20-Gauge Cable Cable is Wired at 1- & 4-Pin Positions Integrated Strain Relief in Connectors Oil and Solvent Resistant -22 to 158°F Temperature Range 5' Length

Parameters
Connector 1	1x 4-Pin XLR Male
Connector 2	1x 4-Pin XLR Male
Current	10 A Input/Output
Wire Gauge	20 AWG
Operating Conditions	-22 to 158°F / -30 to 70°C
LED Indicators	No
Cable Length	5' / 1.5 m
Packaging Info
Package Weight	0.245 lb
Box Dimensions (LxWxH)	4.95 x 2.8 x 2.2"

Related Questions and Answers

Q: 1. Is this Eartec Max 4G headset the direct replacement for the Eartec 3G or is it just another model? Is it fully functional with the PortaPhone Flex Series headset kit?

A: Thank you for yoru question. This model is a replacement 3G and should work no problem with the Portaphone

Q: 2. is this compatible with telex (radio com) wireless systems?

A: I use them with a wired Production Intercom (PI) system which is similar to Telex. Anything with the same pin set like Robbie said.

Q: 3. Will this work with the new Blackmagic Design Studio Camera 4K Pro ?

A: Yes

Q: 4. Will this work with the Atem constellation since it has a 5 pin xlr input?

A: Yes, the Eartec Max 4G Double Headset with 5-Pin XLR Male Connector is compatible for use with the 5-pin XLR talkback connection on the Blackmagic Design ATEM Constellation Switcher.

Q: 5. Will this work with the Blackmagic ATEM Camera Converter?

A: I'm sorry, but this Eartec headset will not be compatible with the Blackmagic ATEM Camera Converter. These would be similar options you could consider instead: https://bhpho.to/3BYboob , https://bhpho.to/3SsFuqQ

Q: 6. will this work with a walkie talkie?

A: Yes but for the Kenwood 2-Pin Radios only.

Q: 7. Would this work with a Comstar Flex system as a plug in?

A: I couldn't say for that exact system but having owned this product for a good few months now and with many different systems, I have found that on wireless systems everyone else on the network tells me I am very very quiet compared to wearing a generic headset - I believe this can be fixed by turning up the gain on the pack, but not all packs seem ti have this control. Wired systems I have never had any problems with.I have tried to contact eartec about this with no success as of yet.

Q: 8. Will this work with a hasselblad 80mm T* lens and the flash q20 flash and trigger?

A: Yes, the LightPix Labs Male PC Sync Cord should be compatible for use with the Hasselblad 80mm F/2.8 CF T* Lens and the LightPix Labs FlashQ Q20 along with the LightPix Labs T1-S FlashQ Trigger Kit.

Q: 9. Will this work with Ikegami cameras?

A: No, this headset is specific to Eartec systems.

Q: 10. Would this adapter work for powering the new BlackMagic 4k Video Assist monitor?

A: The Blackmagic Video Assist 4K uses a 2.5mm barrel. This cable lists it offers a 2.5mm on one end which should connect to the Video Assist 4k.

Nick Ullo	17/08/2024
[0.245 lb] I bought it as a replacement for an XLR power cable that I misplaced during a shoot. The original cable was 6 feet, and did not lock into the XLP connection securely. The Bescor replacement was four feet longer, locked securely, was more supple, and best of all, was cheaper! So far, no complaints. 5

Dennis in Tulsa	12/08/2024
[0.245 lb] For price you cant beat these 10' power extensions for powering your LED lights. 5

anyonymous	25/07/2024
[5' / 1.5 m] The product is everything B&H advertised and shipping was fast!!! B&H, you always know what to expect. 5

Jeffrey	09/07/2024
[5' / 1.5 m] Great length. Better option than Brand name cables 5

Norman From Boston	06/07/2024
[5' / 1.5 m] I have a power XLR Power Out on my Anton Bauer battery charger. With two charged batteries attached, I can run lights or cameras for hours on end. This 10 foot cable gives me lots of options for powering gear. 5

Luke	18/06/2024
[20 AWG] I use this extension for boomed lighting where with a brick battery mounted on the stand. It works and gives that extra reach to the fixture. No issues. 5

Luke	18/06/2024
[20 AWG] I use this extension for boomed lighting where with a brick battery mounted on the stand. It works and gives that extra reach to the fixture. No issues. 5