The Fxlion FX-HP300S 14.8V V-Mount Battery 300Whfrom Fxlion FX-HP300S 14.8V V-Mount Battery 300Whcan supply a maximum of 15A / 180W constant power to LED fixtures and other equipment. It has a total capacity of 300Wh (20.4Ah). It is compatible with V-mount power systems and features both D-Tap and DC outputs that can be used for charging as well as discharging. Additionally, this battery comes with a USB output that allows for charging compatible devices like smartphones, and more.

Working Current up to 15A    5-Level LED Power Indicator    Chargeable Lithium-Ion Battery    Intelligent Protection Circuit Design    D-Tap and DC Outputs    Works with Select PL-Series Chargers

Compatible with PL-3680B, PL-3680D, PL-3680E, PL-5680, PL-Q80B, PL-Q280B, PL-Q480B, PL-1680B, PL-4680B, and PL-5680B Fxlion chargers
Suitable for 12V LED lightings and other gear

Charges in approximately 11 hours with Fxlion 16.8V/2A output charger (available separately) and pproximately 5.5 hours with Fxlion quick charger (available separately)

Intelligent protection circuit design for over-heat, over-charge, over-discharge, and over-current protection

D-Tap and DC outputs, both can be used as a charging or discharging port

USB output for charging personal electronic devices

Related Questions and Answers

Q: 1. Will the battery charge from a wall outlet via micro USB while using it in production? Say I was powering an A7s iii via the USB C port and an Atomos Ninja V Via D-Tap dummy battery.

A: no this battery can not be charged through the USB port

Q: 2. Hello. I have an Nano One battery and it seems that the USB charging capabilities have stopped. I am now charging it from D-TAP but the battery seems to discharge once its sitting on desk unconnected. Is there a solution? Is there a reset or firmware reboot?

A: The Fxlion NANO ONE 50Wh 14.8V Ultra-Compact V-Mount Battery (B&H# FXNANOONE), a relatively small cinema battery, draws a small amount of power at all times to enable the functioning of the power switch. As such, if it is left for a long period of time then it will self-discharge to a degree. Moreover, the cells it contains are not of the low self discharge variety. There is no firmware-based nor other solution at this time (2022).

Q: 3. How can this battery be charged if one doesn't have a dedicated v-mount battery charger?

A: You would need to get a charger for this battery. BH #FXPL7S2DS from Fxlion would be a great option. https://bhpho.to/2VJRgB2

Q: 4. what's the max power draw?

A: The Max power draw for this Fxlion Square 98Wh 14.8V V-Mount Battery, would be 5.0A.

Q: 5. Can this work for an Sony FX6?

A: Yes, the Sony FX6 is compatible with BP-U batteries like the Fxlion 98Wh 14.8V Battery with Sony BP-U Mount.

Q: 6. Are you allowed to fly with this battery in your carry-on luggage?

A: You should be able to fly with the Fxlion Nano TWO Ultracompact V-Mount Battery (98Wh) in your carry-on, but we always suggest checking in with your airline as battery regulations are subject to change.

Q: 7. Will this power the new Canon R5C and allow 8k shooting?

A: With a compatible LP-E6NH dummy battery to dtap, the FxLion NANO ONE 50Wh 14.8V Ultra-Compact V-Mount Battery, can power the Canon EOS R5C.

Q: 8. Is charging via d tap ?

A: This battery can be recharged through the D tap ports or via the contact pins on the bottom of the battery using standard V mount chargers

Q: 9. How many hours will one battery charge last generally (for a Canon R5C)?

A: The Fxlion Nano TWO Ultracompact V-Mount Battery (98Wh) would power the Canon R5C for about 7 hours.

Q: 10. Would this be suitable for a Sony PMW-350 or similar? And if so, would it give the same performance as a battery such as the IDX CUE-D95? Lastly, is an IDX charger compatible?

A: The PMW-350 has a V-Mount Battery plate. This battery will work with that camera and at 98Wh has a similar capacity. Also, it will work be compatible with an IDX V-Mount charger.