Enjoy stable and flexible mic placement with the Microphone Stand with XLR Connector and Gooseneck from Gravity Stands. Featuring a black powder-coat finish and built-in XLR connection, the stand offers an elegant appearance without the need for an unsightly cable or mic clip, while the round weighted cast-iron base keeps it firmly in place.

The smartly designed stand features a 14.4" gooseneck with a standard female 3-pin XLR input that allows you to directly attach a wide range of performance microphones. At the bottom of the 45.1" steel tube, near the base, is a standard male 3-pin XLR output, allowing you to run a cable and connect to mixing boards and PA systems.

Height Range: 42.5 to 59.4"    14.4" Gooseneck, 45.1" Steel Tube    Attach XLR Mic to Input on Gooseneck    Male XLR Mic Output Near Bass    Discreet Visual Appearance    Round Cast-Iron Base    Black Powder-Coat Finish

Related Questions and Answers

Q: 1. Does the stand support the typically mic clip that holds an SM58?

A: Yes, you can use a standard mic clip for the Shure SM58 Vocal Microphone like the Shure A25DM Mic Stand Adapter (B&H # SHA25DM) with the On-Stage DS6213 Gooseneck Desktop Microphone Stand. The DS6213 Mic Stand will support the microphone and mic clip.

Q: 2. Can I swivel the boom or pole (360deg.) to the side out of the way or is it designed to be static?

A: Yes, the Gravity Stands Microphone Pole with Table Clamp and Boom Arm can swivel 360 degrees.

Q: 3. What is the height range?

A: The stand is adjustable from a minimum height of 3.5' (1m) to a maximum height of 6.4' (1.9m).

Q: 4. could this hold up a Shure 55SH Series II without dipping or flopping over?

A: Yes, the On-Stage DS6213 Gooseneck Desktop Microphone Stand can be used to support a Shure 55SH microphone. The Shure 55SH weighs about 1.37 lb. and the stand weighs 2.4 lb. While the stand can support the weight of the mic, I would recommend using a sandbag if you want to add weight onto the base for additional security to keep the stand from moving or tipping if it is accidentally bumped.

Q: 5. How tall are the metal lips that keep the laptop from sliding forward?

A: The manufacturer has not provided dimensions for the metal lip that keep the laptop from sliding forward on the Gravity Stands Adjustable Laptop and Controller Stand, but judging from photos showing the stand holding equipment, I would estimate the height of the lip to be approximately 0.4" (10.25mm).

Q: 6. What are the dimensions of the bottom base and the top platform?

A: The dimensions of the bottom base are 9.8 x 9.8" (250 x 250 mm), and dimensions of the top platform are 9.4 x 9.8" (240 x 250 mm),

Q: 7. So where do the three rubber O-rings that come with this bracket get installed?

A: The green rings are replacable with the black ones, if you wish.

Q: 8. What are the measurements of the base?

A: The edges on each side of the triangular base are 11.5" (292.5 mm) long. The tray on top measures 9.4 x 9.8" (240 x 250 mm).

Q: 9. will this hold 6 stands with boom arms?

A: Yes, the Gravity Stands Transport Bag for Six Microphone Stands (Black) can store 6 standard boom stands.

Q: 10. Does B&H sell additional removable/replacement studs for the Gravity MS QC 1B?

A: No, the individual, proprietary components that make up the Gravity Stands MS QC 1 B Quick Coupler for Microphone Clips and Boom Arms are not available separately. Thread adapter replacements can be found, however.