Gyrovu D-Tap 1X4 Splitter Cable 24 Inch

Gyrovu D-tap 1x4 Splitter Cable 24 Inch

Product Code: eq64481
Availability: In Stock

$89.85 $130.28

Qty

22 reviews Write a review

Description
Reviews (22)

The GyroVu D-Tap 1x4 Splitter Cable 24 Inchfrom GyroVu D-Tap 1x4 Splitter Cable 24 Inchsplits one D-Tap port into four D-Tap ports. The cable is 24" long.

1 to 4 D-Tap Splitter 24" Cable Length

Parameters
Connectors	1 x D-Tap Male 4 x D-Tap Female
Cable Length	24" / 0.6 m
Weight	Not Specified by Manufacturer
Packaging Info
Package Weight	0.135 lb
Box Dimensions (LxWxH)	4.85 x 3.65 x 1"

Related Questions and Answers

Q: 1. Since this is 5V DC, could this be powered with a USB to barrel adapter?

A: Theoretically yes, the KanexPro 1x4 HDMI Splitter should be capable of being powered by a USB barrel adapter. However, please note that KanexPro does not officially support using USB power sources for this product. Please use caution as KanexPro may not provide support if your product malfunctions while powered via a USB to barrel pin adapter cable.

Q: 2. How long is this cable?

A: 3 feet or 1 meter

Q: 3. Will this support 2k input and output as well as 4k input and output?

A: Yes, this splitter supports resolutions up to 4096 x 2160.

Q: 4. Is there anyway to mount this to 15mm rails?

A: We have touch fasteners you could use. https://bhpho.to/2uJsUxs

Q: 5. If the input is sending audio as well as video will this output audio as well as video to both outputs?

A: Yes, the KanexPro 1x2 HDMI Splitter will passthrough audio up to uncompressed LPCM to both outputs as well as video.

Q: 6. Does it have an screw holes at the back?

A: There are no mounting points on the Watson Pro D-Tap 1x4 Splitter Cable.

Q: 7. Didn't see this in the questions already: Would this splitter work well if the source cable is 75ft and includes a booster in the line? The lines going out from the splitter would be approx. 30 ft.

A: KanexPro 4K HDMI 1x2 Splitter is only as good as its source. If you have a quality HDMI cable input or a HT Base connection, it will work well. It can distribute up to 50' away.

Q: 8. Will it cause damage to keep this powered on 24/7/365? We have it installed in our employee training room (auditorium).

A: The KanexPro 1×4 HDMI Splitter is a low-voltage item and should not heat up or cause issues, so it should be able to operate 24/7/365. However, I would recommend keeping a spare on hand.

Q: 9. Can it output to 2 displays of different resolution? i.e. 4K + 1080p (downscaled)

A: This product will output the resolution you input in to it, up to UHD 4K. We are not aware of it being able to send out two different resolutions.

Q: 10. Can I power both a zacuto gratical eye and a SmallHD502 using this adapter - most of these splitters are rated for max of 10W, whereas these two devices wils require approximately 13W at full tilt. If not this Watson Dtap splitter, has anyone used another splitter for greater than 10W draw successfully? Thanks!

A: I'm pretty sure the rating is in amps, not watts. 14.4 volts * 10 amps = 144 watts.

Todd	23/09/2024
[24" / 0.6 m] Using a Gold Mount or V-mount battery on big jobs is great, one D-tap is never enough 5

Todd	23/09/2024
[24" / 0.6 m] Using a Gold Mount or V-mount battery on big jobs is great, one D-tap is never enough 5

Barry	13/08/2024
[24" / 0.6 m] Helps when needing more the one D-Tap outlet for your rif. 5

Josh	28/07/2024
[0.135 lb] Does exactly what it's supposed to do. Just have to watch that little switch. Someone on the team clicked it and we were scrambling to discover why the signal wasn't going through. Gaff tape that thing=) 5

Josh	28/07/2024
[0.135 lb] Does exactly what it's supposed to do. Just have to watch that little switch. Someone on the team clicked it and we were scrambling to discover why the signal wasn't going through. Gaff tape that thing=) 5

Kevin	05/07/2024
[24" / 0.6 m] Decent splitter and works well. It will last longer than my crew will keep up with it. 5

Casey	02/07/2024
[0.135 lb] I'm an industry 1st AC and I've been using this Watson splitter for about a year now on countless cameras at this point and this thing has held up perfectly. Usually splitting power to a Teradek Tx, Nucleus Motor (or 2) and an onboard monitor. Haven't had any issues except for looseness at times. Anton Bauer D-Taps are usually skinnier than others (like Tilta's) and tend to slip out of this splitter. The nice thing is everything fits in it because of this. I usually use a small piece of pocket black gaff tape and make it go from end to end over this splitter across the tops of each D-Tap connection to hold it in place for the day when it goes low mod on Steadicam or the operator runs their hand past that spot too often. It works perfect 5