Gyrovu D-Tap To Usb Adapter With Pass-Through

Gyrovu D-tap To Usb Adapter With Pass-through

Product Code: eq64482
Availability: In Stock

$59.85 $90.97

Qty

29 reviews Write a review

Description
Reviews (29)

Run your gear from any battery with a D-Tap port with the GyroVu D-Tap to USB Adapter with Pass-Throughfrom GyroVu. Featuring both a female D-Tap pass-through port and USB output port, this adapter allows you to connect a battery or battery mount with a D-Tap connector to a USB cable (available separately). By enabling you to get by with fewer power sources, this adapter saves you space and hassle.

Adapts Battery D-Tap Port to USB D-Tap Male Input Port USB 5 VDC Output Port D-Tap Pass-Through Port

Parameters
Compatibility	Battery or Battery Mount with D-Tap Female Connector
Converter Type	Built-In DC to DC Current
Input	1 x D-Tap, Male
Output	1 x USB
Power Input	10 to 24 VDC
Power Output	5 VDC
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer
Packaging Info
Package Weight	0.08 lb
Box Dimensions (LxWxH)	4.45 x 3.55 x 1"

Built-in current stabilizer

5V regulated output via USB port

D-Tap female pass-through port

Related Questions and Answers

Q: 1. Can I use this to charge the V-Mount battery?

A: No. The following unit is to power usb-c driven devices Please review the following item for your charging needs. Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output BH #WACSPT • MFR #C-SPT https://bhpho.to/3KvPXhb

Q: 2. Does this work with the Panasonic S1?

A: Yes, it will work with any device with up to 2 Amp x 5 V power consumption. GyroVuTeam

Q: 3. If a V-Mount battery is installed, does the battery then pass power through to these ports, or is a D-tap cable necessary?

A: Yes, power is passed through to the two 2-pin LEMO-type outputs and two D-Tap outputs. The two 2-pin ports also support power input, so you can utilize external power to your rig.

Q: 4. Could you charge a battery through these ports by using a D-tap charger cable?

A: No, the Tilta Power Pass-Through Plate with V-Mount Battery Plate cannot power the V-Mount battery attached through the D-Tap on the unit. The battery can however be charged with its own D-Tap port.

Q: 5. Could I use the Dtap to USB-C to provide power from a v-mount battery to my Fuji XT-3?

A: You will need to have a battery in the Fuji XT-3 with this method. Otherwise you will need a D-tap to Dummy Battery to power the Fuji XT-3.

Q: 6. Will this power the Tilta Nucleus Nano motor? Does the cable regulate to output only 5V, or can it send the full voltage from a V-Mount battery?

A: This is a regulated cable with a 2A output current.

Q: 7. Will this power the Sony a6500?

A: Yes, you can power an A6500 through its Micro USB connection.

Q: 8. Will this also fit the DJI RS2 ?

A: The Tilta Power Pass-Through Plate with V-Mount Battery Plate is not compatible with any of the DJI RS2 models.

Q: 9. Can this be used to power Sound devices-MixPre-6 recorder (original)?

A: The MixPre-6 does have a USB-C connection to power the unit. While we are not aware of a specific test between this cable and that product, it should work.

Q: 10. Is there a version for RS4 Pro coming?

A: Tilta states that there should be an RS4 Pro compatible version of the Tilta Power Pass-Through Plate with V-Mount Battery Plate released soon.

Michael	21/09/2024
[5 VDC] This is made for security cameras... but I got it to hang surround sound speakers from the ceiling. It fits perfect for a surround sound pre-wire and the cable goes through the tube for a clean look. My speakers weigh about 6lbs. I dont know if I would go too much over that though. 5

Michael	21/09/2024
[5 VDC] This is made for security cameras... but I got it to hang surround sound speakers from the ceiling. It fits perfect for a surround sound pre-wire and the cable goes through the tube for a clean look. My speakers weigh about 6lbs. I dont know if I would go too much over that though. 5

Michael B.	29/08/2024
[0.08 lb] I bought the pass through door for my Hero 11 mini and it works perfectly with the Volta! Really convenient! 5

Mario T.	25/08/2024
[5 VDC] Perfect fit for the MINI. It will make for a great set-up when I get my 90 degree USB cable to connect to a power bank for hours of footage. Handlebar mounted MINI with the power bank in a water bottle holder will be perfect on my road bike. MINI mounted on my chest mount with a smaller power bank in my hydration pack will be perfect for my mountain bike footage. 5

Mario T.	25/08/2024
[5 VDC] Perfect fit for the MINI. It will make for a great set-up when I get my 90 degree USB cable to connect to a power bank for hours of footage. Handlebar mounted MINI with the power bank in a water bottle holder will be perfect on my road bike. MINI mounted on my chest mount with a smaller power bank in my hydration pack will be perfect for my mountain bike footage. 5

Chase	18/08/2024
[1 x D-Tap, Male] Very well made, handy wired single button remote for switching between machines, plenty of power for USB devices. I'm using this switch to share my devices between my PC and Mac at my desk. I simply switch inputs on my monitor and press the super handy remote button included with this unit and all my devices are switched over. I had worried about how my audio interface would handle being switched between a Mac and a PC, but so far it has worked perfectly with my Scarlett 2i2. 5

Jason	18/08/2024
[10 to 24 VDC] Needed a wall plate sized mount for my index base stations and these fit the bill having the pass through for the cable leaves a clean look. Used standard sized electrical mud boxes. 5

Jason	18/08/2024
[10 to 24 VDC] Needed a wall plate sized mount for my index base stations and these fit the bill having the pass through for the cable leaves a clean look. Used standard sized electrical mud boxes. 5

Henrik	16/08/2024
[1 x USB] Delivery time Usa to Norway impeccable. i use the bmpcc 6k pro, so balance on the gimble even better, when using v-mount battery. Only one caveat, after i purchased power plate , my Norwegian bank blocked my visa for further purchase reason someone have told my bank that your company is scam, please look in to this as i need to buy more products from you, and im sure other people from Norway. Henrik :) 5

Henrik	16/08/2024
[1 x USB] Delivery time Usa to Norway impeccable. i use the bmpcc 6k pro, so balance on the gimble even better, when using v-mount battery. Only one caveat, after i purchased power plate , my Norwegian bank blocked my visa for further purchase reason someone have told my bank that your company is scam, please look in to this as i need to buy more products from you, and im sure other people from Norway. Henrik :) 5