Featuring four independent charge bays, the Core SWX Fleet Q4Ai Charger with Voltbridge Wirelessis capable of charging four batteries simultaneously by focusing on each individually. Four 98Wh batteries can be charged in approximately 2.5 hours. Supporting 90 to 240 VAC input voltage, the Fleet Q4Ai is worldwide compatible if you incorporate the appropriate plug adapter, sold separately.

The Q4Ai includes Voltbridge wireless Bluetooth management that allows you to view battery health and performance. By using the free iOS or Android app, you can also enable SafeFly mode which allows you to prepare your battery packs for air travel by charging or discharging them to 30% or below. The charger can also be used as a direct power source in Hypercine mode using installed battery packs and the 90W 4-pin XLR port to power your equipment directly with 12 to 16.8 VDC output. There is also a micro-USB port on the back which allows you to manage the unit from a computer.

Weighing five pounds and measuring less than four inches thick, the Fleet Q4Ai is relatively lightweight and slim for a four-battery charger. The housing is made of aluminum, providing for a robust build.

Gold Mount Charger    Charge Current: 3A    Simultaneously Charge 4 x 98Wh Batteries    Worldwide-Compatible 90 to 240 VAC Input    Voltbridge Bluetooth Wireless Management    Set Charge Level with SafeFly Mode    Voltbridge iOS and Android App    Micro-USB Management Port    1 x 90W 4-Pin XLR Output    Aluminum Construction

• Four independent Gold mount charge bays
• Simultaneous charging
• Approximately 2.5-hour charge time for four 98Wh batteries
• Bluetooth wireless Voltbridge management
• Free iOS and Android management apps
• SafeFly mode allows you to charge/discharge batteries to 30% to prepare them for air travel
• 90 to 240 VAC worldwide-compatible input voltage
• Aluminum build
• Weighs 5 lb

Related Questions and Answers

Q: 1. How do you charge this?

A: We have chargers from Core SWX that will work. 2-Bay Gold Mount Charger - https://bhpho.to/30IkrYJ D-Tap Wall Charger - https://bhpho.to/30J4p0U

Q: 2. Does this model (BH #COFLEETQ4S MFR #FLEET-Q4S) have the ability to discharge for air travel?

A: No, The SWX FLEET-Q4S will not be able to discharge batteries. The best choice with discharging support using the VoltBridge app ( Apple or Android) would be the Core SWX Fleet Q4Si https://bhpho.to/3LMVU9v

Q: 3. How much power can the 5V USB port deliver (in Watts or Amps)?

A: Core SWX does not list how many amps this battery outputs for the USB connection. However their Nano-U98 has a 5V USB as well which they list as 3 Amps. We believe the USB on this will offers a similar strength of power.

Q: 4. Can this battery legally travel airborne?

A: You will want to check with your airline directly as restrictions on batteries frequently change. At this time you can travel with batteries that are above 100 Wh, you may just need to first get approval from the airline.

Q: 5. s it safe to charge IDX CUE-D150 v-lock batteries on this?

A: The truth is all gold mount and v-mount chargers can charge all gold mount and v-mount batteries. But note this other truth: manufacturers do not support this action. What this means if a problem or damage occurs, then they will not do warranty repair on either the charger or battery. You are on your own.

Q: 6. Can these take a charge via the P-tap?

A: According to the The V-plate adapter manual there's no pass through to charge via P-TAP. I'm guessing this would be the same. You'd have to call the manufacturer to confirm.

Q: 7. 2 questions: 1) is the 3A charge current for each channel? 2) does this prioritize charge or 3A per channel constant?

A: The Core SWX Fleet D Gold Mount 2-Bay Charger (B&H# COFLEETD2A) supplies each battery a regulated 3A of charge current regardless of the number of batteries present. If two 98Wh batteries are installed, for example, then you can therefore expect a charge time of approximately 2.5 hours, although that does vary according to temperature and variances in battery chemistry.

Q: 8. Can the charger provide XLR power while charging from AC?

A: While drawing AC power, the Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries (B&H# COFLEETQM4S) can either charge the batteries or provide power through the 4-pin XLR output. You can select your preferred option of those two using the selector switch on the back of the unit. Those two alternatives cannot both be used at the same time.

Q: 9. Will these work with generic V-Mount cameras that aren’t RED?

A: These batteries use a different protocol for communication with RED cameras. You still may be able to use them with other V-Mount products, they just may not communicate over information properly. It would be a better idea to use the standard V-mount kit for non-RED products, BH #COGPX2SHC9MB. https://bhpho.to/2Kzavc7

Q: 10. Can the Fleet-D2A charge all of Anton Bauer batteries or is limited t only lithium-ion Core SWX brands?

A: This should be able to charge any Gold Mount Battery by any brand.