Behringer Ultrazone Zmx8210 V2 8-Channel Mixer

Behringer Ultrazone Zmx8210 V2 8-channel Mixer

Product Code: eq64651
Availability: In Stock

$417.00 $583.80

Qty

9 reviews Write a review

Description
Reviews (9)

The Behringer ULTRAZONE ZMX8210 V2 8-Channel Mixerfrom Behringer ULTRAZONE ZMX8210 V2 8-Channel Mixeris an eight-channel audio mixer designed specifically for fixed installations. It can be used to distribute music programming and announcements to up to three zones (rooms) in restaurants, office spaces, health clubs, and houses of worship.

The ZMX8210 V2 lets you take up to eight input signals and route them to any or all 3 destinations. It can allow you to play stereo music for clients waiting in the lobby of your office and page people in the work area. Other features include: a ducker to lower the volume level of the program music in specific zones during announcements, four-band equalization, and remote volume controls can be installed in many areas.

Furthermore, you can use any microphone with the ZMX8210 V2, including a condenser mic, thanks to an onboard 48V phantom power. The mixer's eight inputs are built with high-quality mic preamplifiers for pristine sound quality. The ULTRAZONE ZMX8210 V2 Professional 8-Channel 3-Bus Mic/Line Zone Mixer's intuitive control panel offers users total control over their sonic environment and is easy to set up and operate.

6 x Balanced Euroblock Input Connectors 2 x RCA Unbalanced Input Connectors Left, Right, and Aux Euroblock Outputs Microphone and Line-Level Inputs -20 dB Pad Low, Low Mid, High Mid, High EQ Volume Controls Remote Control and Link Ports Includes IEC Power Cord

Parameters
Type	Inputs 1-6: Euroblock Connector, Balanced Impedance: 5 kOhms Balanced, 2.5 kOhms Unbalanced Maximum Input Level: +12 dBu (with Pad) Maximum Gain: 40 dB Pad: -20 dB Crosstalk: -63 dB @ 1 kHz Common-Mode Rejection Ratio: (CMRR) 70 dB @ 1 kHz, 22 Hz to 22 kHz Equivalent Input Noise (EIN): -116 dBu, A-Weighted; Terminated with 150 Ohms Inputs 7 - 8: RCA Connector, Unbalanced Impedance: 20 kOhms, Unbalanced Maximum Input Level: +10 dBu Maximum Gain: 13 dB
Outputs	Out: L/Out R/ Aux Type: Euroblock Connector, Balanced Impedance: 120 Ohms Balanced, 60 Ohms Unbalanced Max Gain: 18 dB Max Gain: (Input / Output) 58 dB (without Pad) Maximum Output Level: +21 dBu Crosstalk (Output / Output): -63 dB @ 1 kHz Noise (All Level Controls Down): -105 dBu, A-Weighted Signal-to-Noise Ratio: 87 dB @ 0 dB, A-Weighted
Bus Connection	Type: Euroblock Connector, Unbalanced Impedance: 2.7 kOhms Maximum Output Level: +14 dBu
Remote	Type: Euroblock Connector Volume Control: 30 dB Attenuation with 10 kOhms Potentiometer (Not Included) 60 dB Attenuation with 100 kOhms Potentiometer (Not Included) Channel Select 7/8: Push-Button Switch Required (Not Included)
Equalizer	Mic Low Cut: 100 Hz, 18 dB/Oct. High-Pass Filter, Butterworth Low: ±15 dB @ 70 Hz, Shelving Low Mid: ±15 dB @ 300 Hz High Mid ±15 dB @ 3 kHz High ±15 dB @ 10 kHz, Shelving
System Specifications	Frequency Response: 20 Hz to 22 kHz, ± 0.5 dB
Distortion	THD+N: < 0.05%
Power Supply	Switch-Mode Power Supply: Autorange, 100 to 240 VAC, 50/60 Hz
Power Consumption	15 W
Main Connector	Standard IEC Receptacle
Dimensions	1.7 x 19.0 x 6.0" / 4.3 x 48.3 x 15.2 cm
Weight	3.7 lb / 1.7 kg
Packaging Info
Package Weight	4.88 lb
Box Dimensions (LxWxH)	20.7 x 9.9 x 4.3"

Ultra-flexible and easy-to-use zone mixer with remote control ports for commercial sound systems and fixed installation applications

Six ultra-low noise mic/line inputs with gain control, -20 dB pad, level/clip indicator, +48 V phantom power and bus-assign switches

Two selectable high-headroom stereo inputs with mono/stereo switch

Channel 1 provides variable threshold to enable automatic bus mute for announcements, etc.

Three assignable outputs (left, right, and aux) with individual master controls and 5-segment LED meters

Ultra-musical 4-band master EQ and global microphone low-cut filter for perfect sound adjustment

Left, right, aux, and mute bus links available including master/slave switch for connecting multiple units

Remote master left/right level control port for ultimate flexibility

Select switch for routing microphone bus post remote control

Integrated channel muting system with priority select

Inputs/outputs on Euroblock and RCA connectors

Internal switch-mode power supply (100 to 240 V) for noise-free audio and low power consumption

Related Questions and Answers

Q: 1. can this mixer accept a phono input?

A: The Behringer XENYX 1202FX is designed to accept line level signal only via the RCA or 1/4 inputs. A phono level signal will require a preamp to be connected. The Rolls VP29 is a popular choice.

Q: 2. What cables do I need and where do I hook My Behringer 800 headphone amp to ?

A: You will need 1/4 cables.The back of the headphone amp is 1/4 TRS cable. This will be put in line to your interface or audio mixer. Most often will be 1/4 TRS on the interface or mixer. Be sure that you won't need 1/4 from headphone amp to XLR on interface or mixer.Think about how far the amp will be from said gear to order,just enough length in your cables.I bought 6 cables since my amp sits on top of interface.Hope this helpsDanny

Q: 3. on the mono sumed output do you have level control?

A: Yes. The Low Output control can be used to adjust the output level of the mono summed low frequency band from +6 to -6 dB.

Q: 4. What happens to the signal on left and right inputs, if I plug in stereo microphones? Are they automatically converted to mono is just one channel used from each microphone? I only have stereo microphones.

A: You would only be able to plug in one stereo mic to this unit, utilizing the center input marked stereo. If you have two mono microphones that terminate with a 3.5mm stereo mini connector, you would connect one into the left and another into the right input.

Q: 5. What are the differences in the Behringer's CX3400v2 and the CX3400?

A: There are no real discernable differences between the units.

Q: 6. In the effects, how long of a delay can you get with this mixer?

A: Behringer does not provide this specification. You may e-mail us at: Audio@BandH.com and we will be happy to contact Behringer for additional details.

Q: 7. Can this mixer be used with passive speakers?

A: Active speakers only. There is no amplifier section in this mixer.

Q: 8. can i connect this directly to headphone out of my mixer? or there's a better way to connection? thanks

A: Yes you connect it but you have to use the right cable .

Q: 9. Can it record in digital form (like mp3) and be transfered to/from the unit? Or I need an USB model?

A: This is not a recorder at all, just a mixer with various outputs.

Q: 10. Can this product work in Israel with a voltage of 220v?

A: Thank you for your question. this product can only work on 110V.

Alan	05/09/2024
[3.7 lb / 1.7 kg] I hesitated at giving a 5-star rating because of the absence of a power button, but decided all the other great things about this mixer overshadowed that. This little mixer lacks nothing that I need in a mixer and has a footprint comparable to my 10 tablet. It has 12 inputs 4 of which are XLR inputs with 3 band EQs. Phantom power is there for my condenser mics as well as 99 great sounding effects such as reverbs, echoes, and much, much more. If you are a musician/singer working coffee houses and such this mixer is perfect. Pick up a powered speaker to use with it and you are in business. The mixer is also very quiet for recording and the Tape In/Out is right there for ya. 5

Subrata	25/08/2024
[3.7 lb / 1.7 kg] Excellent value for the price 5

anyonymous	17/08/2024
[THD+N: < 0.05%] small but feel so big that change the whole system I got works like magic..use it not just try it. Love it. 5

anyonymous	17/08/2024
[15 W] I use it for karaoke 5

Mark	28/07/2024
[15 W] It's great for small gigs that still needs just a touch of reverb. Is it the best DSP ever? No. But, it helps fill in just a little to keep the sound full. Over all build quality is good and we've used this model for over 6 years with no problems. 5

Zupe	18/06/2024
[4.88 lb] I purchased this little mixer for a dinner piano gig I do. Not only do I sing, but I use some backing tracks I put together in my studio (bass & drums, mostly). I needed a small, lightweight mixer with built-in effects that I could plug my mic and i-Pod into. The Xenyx 1202FX fits the bill perfectly. It gives me plenty of channels (enough for another couple of musicians to plug into for an impromptu jam) and the built-in digital effects does a fine job giving space to my mic channel. As with any mixer this size, the power supply is a separate in-line lump, which some people may not be thrilled about. Overall, the Xenyx 1202FX is exactly what I needed in a compact and affordable package. Highly recommended! 5

Ronald	14/06/2024
[3.7 lb / 1.7 kg] I used this Behringer XENYX mixer for the first time at charity fundraiser. Connected a wired mic, wireless mic and a wireless head set mic to it. Sent the mix out to a JBL EON ONE...all worked great. The footprint is only about 12 square and it has everything I needed for controlling multiple inputs. Great price too! 5

Gene S	12/06/2024
[15 W] I play both guitar and keyboards. I got this mixer so that I could plug in a couple of keyboards, the combination effects pedal, and a microphone all at the same time and feed them into a couple of Behringer powered speakers. The keyboards and the effects pedal have stereo outputs which works out great with the 4-sets of stereo inputs on the mixer. So far I have been very happy with this mixer. I have been enjoying the convenience and the additional effects. one way it could be improved would be to add XLR mains. 5

Russell	01/04/2024
[THD+N: < 0.05%] Had a sound system die in a church and needed something temporary to get them by. This combined with a DSP made my job MUCH easier and it solved a lot of problems for me. 5