The SKB iSeries Sennheiser XSW-D Wireless Audio Casefrom SKB iSeries Sennheiser XSW-D Wireless Audio Caseis designed to accommodate two Sennheiser XSW-D receivers and two transmitter bodypacks and also has an accessory pocket that will hold lavalier mics and other accessories.

The interior is created with a custom-cut high-quality PE foam and the exterior is an high-strength polypropylene copolymer resin. It is UV, solvent, corrosion, and fungus resistant and has a complete gasket seal that makes the case watertight (MIL-STD-C-4150J). It is built with an automatic ambient pressure equalization valve and has a trigger-release latch system.

Furthermore, the case is resistant to corrosion and impact damage and has a molded-in hinge with built-in stainless steel locking loops, which are offered with an over-molded cushion grip handle. The case is made in the USA and includes an unconditional lifetime warranty.

Foam Cut Interior for XSW-D Wireless Set    Accessory Pockets for Lav Mic and Cables    Durable Polypropylene Copolymer Resin    UV, Corrosion & Fungus Resistant    Gasket Seal for Watertight Rating    Ambient Pressure Equalization Valve    Molded-In Hinge    Trigger-Release Latch System    Stainless Steel Locking Loops    Rubber Over-Molded Cushion Grip Handle

Custom-cut interior for Sennheiser XSW-D dual ENG set

Accessory pocket for lav mic and other accessories

High-strength polypropylene copolymer resin

UV, solvent, corrosion, and fungus resistant (MIL-STD-810F)

Gasket seal makes the case watertight (MIL-STD-C-4150J)

Automatic ambient pressure equalization value (MIL-STD-648C & IP67)

Resistant to corrosion and impact damage

Molded-in hinge

Trigger-release latch system

Stainless steel locking loops

Accepts SKB TSA padlocks

Rubber over-molded cushion grip handle

Custom cut foam interior

Related Questions and Answers

Q: 1. Will it fit the Zeiss CP.3 135 and 100mm cine lenses?

A: SKB iSeries Watertight Lens Case is made for Cine lenses with an outer diameter of 125mm. Zeiss CP.3 XD 135mm T2.1 and 100mm T2.1 Compact Prime have a smaller outer diameter, therefore the lens won't be safely snuggle in the precut foam. I would recommend getting the case with a customizable cube foam.

Q: 2. I'm looking for a case for my Sony UWP-D26 wireless mic combo. It contains the new D26 transmitter and receiver plus the plug on transmitter. Is this the correct case?

A: Yes, the SKB iSeries Waterproof Case for Sony UWP-D16, Sennheiser EW, or Senal Wireless Combo Mic Systems should hold the components of the Sony UWP-D26 Camera-Mount Wireless Combo Microphone System nicely.

Q: 3. Is this a regular / standard size rack? I noticed the 17 interior width, which is normally at 19.5. Thanks

A: Hi Jonathan, Sorry for the confusion. Yes, it is a regular/standard size rack. The length of this case from plastic to plastic end is 23 . The standard 19 rack goes against this dim so you have 2 of space on each side for protection. The width/depth of this case is 17 which goes against the 13 depth of the rack providing 2 of space on either side for knobs and dials sticking out as well as protection from impact. Thank you,Will

Q: 4. Would this be appropriate for the XS Wireless 2 system? The cardboard box is not cutting it.

A: According to the specs of the XS Wireless 2 receiver, the iSeries Waterproof Case for Sennheiser EW 100/300/500 Series Wireless Combo Mic should be able to hold the XS Wireless 2 receiver, however there will be a bit of empty space as the receiver is smaller than the EW 100/300/500 series.

Q: 5. Do the Rokinon Xeen fit?

A: Xeen's fit, but not well. The 16mm is a good fit, but the other lenses are taller than the holes, so about an inch of the lens hangs out. The case can still close, but it's tight. I bought this case specifically for my Xeen's and will be returning it because it's not a correct fit.

Q: 6. Does the H4N fits in this case? I want to buy this pack: https://a href= http://www.bhphotovideo.com/bnh/controller/home?O=cart_accessories&A=details&Q=&sku=1200980&is=REG&bundleId=1200980REG target= _blank www.bhphotovideo.com/bnh/controller/home?O=cart_accessories&A=details&Q=&sku=1200980&is=REG&bundleId=1200980REG/a

A: Yes I have this pack with the h4n and wireless mics in it.

Q: 7. Will the MacBook Pro 16" fit in the laptop sleeve?

A: The item description states that only a 15" laptop will fit in the sleeve.

Q: 8. Hi there, does the Canon CN-E 135mm fit in this case? Thanks!

A: It appears that it would. Testing would confirm this. However, since the lens set is a lot of $$$, if these were my lenses I would feel better if they were in a bigger box with a bit more padding. Here is such a case. Pelican 1510 Carry-On Case with Foam Set (Black) B&H # PE1510FB.

Q: 9. Does this includes the 6U rack case inside the black carrying box? Or just the black box. Thank You

A: Hi Jonathan, It includes both the rack frame and the case. It does also includes rack screws and keys for the TSA locking latches. Thank you,Will

Q: 10. What color are the cases?

A: The SKB cases are dark grey/black for the most part. We do have two that are in pink. However, those are quite obvious so there should be no possible mix up. If you get one of those, there will be no denying whose case it is on the airline luggage carousel.