Enjoy stable and flexible mic placement with the Gravity Stands Heavy-Duty Microphone Stand Folding Tripodfrom Gravity Stands. With its heavy base and short legs, this 12.6" stand is especially suitable for bass drum miking. The stand's base is equipped with heavy-duty rubber caps for surface protection.

Featuring two-point tilt and position adjustment, the 34.6" telescoping boom enables you to easily place your mic exactly where you need it. The built-in retainer enables you to quickly and securely attach a separately available microphone clip without any tools. A set of black coding rings is included in the package (color rings available separately).

Suitable for Bass Drum Miking    Height: 12.6"    Heavy Zinc Base with Short Steel Legs    Rubber Cabs for Surface Protection    Boom Arm Telescopes to 34.6"    2-Point Boom Adjustment    Toolless Mic-Clip Attachment    Black Powder-Coat Finish    Black Coding Rings Included

Short tripod microphone stand suitable for bass drum miking

Heavy base and short legs

34.6" telescoping boom

Pack of black rings included (1 x 25mm, 2 x 15mm, and 3 x 20mm)

Colored rings available separately

Related Questions and Answers

Q: 1. will this hold 6 stands with boom arms?

A: Yes, the Gravity Stands Transport Bag for Six Microphone Stands (Black) can store 6 standard boom stands.

Q: 2. Can I swivel the boom or pole (360deg.) to the side out of the way or is it designed to be static?

A: Yes, the Gravity Stands Microphone Pole with Table Clamp and Boom Arm can swivel 360 degrees.

Q: 3. Is this hanger compatible with the Kupo High Roller stand (BH #KUKS300112)?

A: The Kupo Hanger for Heavy-Duty Stands (46.5") is compatible with the Kupo High Roller Stand (14').

Q: 4. What is the minimum height of these stands?

A: The minimum height on the Gravity Stands GSP3102 Studio Monitor Speaker Stand is 10.3".

Q: 5. Does this work with the Proaim Heavy-Duty Portable Tripod Dolly?

A: The dolly only works with tripods with dual-spiked feet.

Q: 6. How do you set up for ORTF where one mic is raised? Is there some height allowance?

A: You should be able to move the bottom threaded washer up on the 3/8'' thread male to raise the overall height of a mic clip. However, if this wasn't high enough for your mics, a spacer and additional adapter would be needed. Here's a recommendation BH #DPDUA0019 along with B&H # ONMA300.

Q: 7. will these work with Matthews combo stands? they tend to need a wider slot.

A: Yes, as long as the stands feature a 5/8 receiver or a junior pin the stand will adapt. Please review the following item Impact CA-106 Junior to Baby Pin Adapter BH #IMCA106 • MFR #CA-106 https://www.bhphotovideo.com/c/product/824421-REG/impact_ca_106_junior_pin_to_baby.html?sts=pi

Q: 8. Can you plug this into the airplane headphone plug in order to watch movies?

A: The answer above in not correct . But I couldn't fine a way to erase it...The HED 027 is a MONO headphone single pole headphone. It will work in most airplanes , but may require an adapter to get sound to both ears. The HED 024 is the stereo version, and will work with airplane headphone jacks

Q: 9. I'm curious of any recommendations for a tripod that can be used both for photography purposes, but also have the ability to mount a motorized astrophotography tracking head to it at a later time? Id rather splurge on the tripod, being I'd use it for both. Id like it to be backwards compatible with either / or, multiple types of head options (basically be as future proof as it could be). Any advice would be really appreciated! Budget, midrange, and top of the line suggestions would be awesome! Id end up buying a higher end ($1000-ish) tracking head. Willing to hear what else you all suggest! Thanks

A: There are many tripods that can work with regular too mortised heads. The one you listed is good, Manfrotto 528XB Heavy Duty Tripod. And this is some others but there are many more, https://bhpho.to/3dnoIGP .

Q: 10. I bought this stand but can't attach my Neewer 70 inch jib without a mount. Which mount will fit this stand?

A: The Proaim P-JS Heavy-Duty Jib Stand does not provide threading above the 33mm diameter pole, nor does Proaim manufacture an adapter since the stand is designed for Proaim jibs with a center post mount. A suggestion in adapting the Proaim P-JS Heavy-Duty Jib Stand to either the 1/4"-20 or 3/8"-16 threading present under the Neewer 70 inches Carbon Fiber Jib Arm Camera Crane is using the Glide Gear Speaker Stand to 1/4"-20 Adapter with ProTapes Pro Gaffer Tape (2" x 12 yd, Black). The inner diameter of the Glide Gear Speaker Stand to 1/4"-20 Adapter is 35.75mm. It is possible to decrease the gap between the stand and adapter by wrapping tape around the pole so there is a more flush fit. See the links below: https://bhpho.to/3H8W9fP https://bhpho.to/3kqB5Zz