Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. How many clamps does it come with the purchase?

A: one per purchase and i have 2 of them

Q: 2. is the hold for the fold back velcro or a magnet? In the picture it's velcro but on their website it's a magnet.

A: Magnets hold the folded-back finger and thumb covers out of the way.

Q: 3. How do you determine the glove size?

A: Here is the sizing chart to determine glove size for The Heat Company Heat 3 Smart Mittens/Gloves (Size 11, Dark Army Green) https://theheatcompany.us/pages/sizetable?c=us

Q: 4. Is the thing that hold the fold back velcro or a magnet? In the pictures here it shows velcro but on their site it shows a magnet.

A: Magnets hold the folded-back finger and thumb covers out of the way.

Q: 5. Is this the same spec as the rods used in hollywood arms?

A: Yes. The following unit will adapt to any grip head on the market.

Q: 6. Why does it have two speeds? Can you turn off the blower?

A: The two speed function is meant to help increase its ability to remove dirt from carpets. The blower is an optional function and must be turned on to use.

Q: 7. What are the sizes for the v/gold mount battery compartments?

A: The V/Gold mount cutouts on the Jason Cases Pelican Case for Sony FX6 are designed to fit standard form factor battery sizing.

Q: 8. Are these as good as the Pony 3201 USA-made clamps? The ones B&H discontinued. These look a bit cheap.

A: The clamp is very similar and I have not seen that big a difference. And Pony has discontinued the spring clamp and is no longer making them.

Q: 9. The vinyl tips are constantly falling off for me when I use these. Any tips on how to keep them on?

A: You could use some gaff tape to secure the tips to the metal either running the length from end to end on each side (this also stops any reflected light from bouncing off the a clamp) or around the base of the tip onto the metal.

Q: 10. What size clamp would you recommend for clamping a sound blanket?

A: The size clamp you will need will depend partly onto what item you will be clamping the sound absorption blanket. If you are clamping it to a pipe, you would have to take into consideration the diameter of the pipe, as the jaws have to be wide enough to go around the pipe, as well as to hold the blanket. As a catch-all recommendation, I would typically recommend the Impact 2" Steel Spring A-Clamp (Black), B&H # IMSSCA20B • MFR # SSC-A20B, over the smaller Impact 1" Steel Spring A-Clamp (Black) due to its larger size and extra flexibility.