Jvc Ky-Pz100 Robotic Ptz Camera Ndi Kit White

Jvc Ky-pz100 Robotic Ptz Camera Ndi Kit White

Product Code: eq65863
Availability: In Stock

$8,985.00 $12,848.55

Qty

17 reviews Write a review

Description
Reviews (17)

This white JVC KY-PZ100 Robotic PTZ Camera NDI Kit Whitefrom JVC KY-PZ100 Robotic PTZ Camera NDI Kit Whitecan be used as a single camera or part of a multi-camera shoot. It features a 1/2.8" sensor and captures 1080i/p and 720p footage to a microSDHC/SDXC card slot (microSD card not included). The PTZ camera features 3G-SDI and HDMI outputs and can simultaneously output video while streaming over its Ethernet port or an optional USB Wi-Fi adapter or LTE modem.

The KY-PZ100 supports RS-232C, RS-422 control signals and IP control via its RJ45 connector (Ethernet port). You can program over 100 presets and positions into the camera, which enables you to pre-plan your show. The camera can be mounted on either a tripod or ceiling, and with its POE capability you don't need to worry about running an AC power cord.

White KY-PZ100 Robotic HD PTZ Camera SDI to Full NDI Converter 30x Optical Zoom, up to 1080p Resolution 3G-SDI, HDMI Outputs, microSDHC/XC Slot

Key Specs
Image Sensor	1/2.8"-Type CMOS
Sensor Resolution	Effective: 2.13 Megapixel
Shutter Speed	1/10000 to 1/8 Second
Optical Zoom Ratio	30x
Max Digital Zoom	12x
External Recording Modes	SDI/BNC / HDMI 1920 x 1080i at 50/60.00 fps 1920 x 1080 at 25/30.00/50/60.00 fps 1280 x 720 at 50/60.00 fps
Internal Recording Modes	H.264 1920 x 1080p at 25/29.97/50/59.94 fps [28 to 50 Mb/s] 1920 x 1080i at 50/59.94 fps [5 to 50 Mb/s] 1280 x 720 at 25/29.97/50/59.94 fps [5 to 35 Mb/s]
Broadcast Output	NTSC/PAL
IP Streaming	H.264, MPEG2, RTMP, RTP, RTSP, TCP, UDP, ZIXI 1920 x 1080 at 25p, 30p, 50p, 60i, 60p (3.0 to 20.00 Mb/s) 1280 x 720 at 25p, 30p, 50p, 60p (1.5 to 20.00 Mb/s) 640 x 360 at 25p, 30p (0.3 to 3.0 Mb/s)
Supported Control Protocols	IP Pelco-D RS-422 RS-485
PoE Support	PoE+ 802.3at
Mounting	1x 1/4"-20 Female for Ceiling/Desktop/Tripod
Imaging
Image Sensor	1/2.8"-Type CMOS
Sensor Resolution	Effective: 2.13 Megapixel
Built-In ND Filter	No
Image Stabilization	Digital
Exposure Control
Shutter Speed	1/10000 to 1/8 Second
Gain	0 to 48 dB
Signal-to-Noise Ratio	50 dB
White Balance	Range: 3200 to 5600K Presets: Manual, AWB
Lens
Focal Length	4.3 to 129mm (35mm Equivalent: 30.5 to 915mm)
Optical Zoom Ratio	30x
Max Digital Zoom	12x
Maximum Aperture	f/1.6 to 4.7
Video Capture
External Recording Modes	SDI/BNC / HDMI 1920 x 1080i at 50/60.00 fps 1920 x 1080 at 25/30.00/50/60.00 fps 1280 x 720 at 50/60.00 fps
Internal Recording Modes	H.264 1920 x 1080p at 25/29.97/50/59.94 fps [28 to 50 Mb/s] 1920 x 1080i at 50/59.94 fps [5 to 50 Mb/s] 1280 x 720 at 25/29.97/50/59.94 fps [5 to 35 Mb/s]
Audio Recording	MOV: 2-Channel 48-Bit 16 kHz LPCM Audio
Broadcast Output	NTSC/PAL
IP Streaming	H.264, MPEG2, RTMP, RTP, RTSP, TCP, UDP, ZIXI 1920 x 1080 at 25p, 30p, 50p, 60i, 60p (3.0 to 20.00 Mb/s) 1280 x 720 at 25p, 30p, 50p, 60p (1.5 to 20.00 Mb/s) 640 x 360 at 25p, 30p (0.3 to 3.0 Mb/s)
Control
Presets	100
Move Speed	Pan: 480°/sec Tilt: 300°/sec
Movement Range	Pan: 350° (-175 to 175°) Tilt: 120° (-30 to 90°)
Tally Light	Yes
Supported Control Protocols	IP Pelco-D RS-422 RS-485
Wireless Range	23' / 7 m (IR)
Interface
Media/Memory Card Slot	Single Slot: microSDXC Only
Video I/O	1x BNC (3G-SDI) Output 1x HDMI Output
Audio I/O	1x 1/8" / 3.5 mm TRS Stereo Mic/Line Input
Other I/O	1x RJ45 (LAN, RS-422) 1x Mini-DIN 8-Pin (RS-232) Input 1x Mini-DIN 8-Pin (RS-232) Output 1x Unspecified USB (LAN) Input/Output
Built-In Speaker	No
Power
PoE Support	PoE+ 802.3at
Power I/O	1x Barrel (12VDC up to 1.2 A) Input
Power Consumption	PoE: 42 to 57 VDC at 0.4 A
General
Mounting	1x 1/4"-20 Female for Ceiling/Desktop/Tripod
Certifications	FCC Part 15 Class A, ICES-3 A
Operating Conditions	32 to 104°F / 0 to 40°C
Storage Conditions	-4 to 122°F / -20 to 50°C
OS Compatibility	Windows 7 or Later / macOS 10.11 Only
OS Compatibility	Windows 7 to 10 macOS 10.11
Dimensions (W x H x D)	6.1 x 7.9 x 7.5" / 154 x 200.7 x 191 mm
Weight	4.19 lb / 1.9 kg (Body Only)
Packaging Info
Package Weight	7.45 lb
Box Dimensions (LxWxH)	12.2 x 11.9 x 10"

The camera features a built-in USB host that allows you to attach a USB Wi-Fi or LTE adapter and stream
The camera supports streaming with SMPTE 2022 forward error correction
Advanced Zixi reliable communication with ARQ, FEC, and adaptive bitrate control
Low-latency streaming
1/2.8" CMOS sensor (2.2 million pixels)
30x optical zoom ratio (4.3-129mm, f/1.6 to 4.7)
Fast f/1.6-4.7 maximum aperture for excellent low light
LoLux mode (down to 0.01 lux)
Robotic pan, tilt, and zoom
Full HD 1080p, 1080i, 720p video
3G-SDI and HDMI digital outputs
2-channel audio (or 1 channel balanced audio with phantom power)
USB host connection for Wi-Fi or 4G LTE adapter
LAN connector supports Power over Ethernet
MicroSDHC/SDXC memory card recording
Remote control via RS-232C / RS-422, or via IP controller
Can memorize over 100 preset settings and positions
Can be mounted upside-down or right-side-up

Related Questions and Answers

Q: 1. Can this camera be controlled through Visca over IP in OBS(PTZ Camera Controls plugin)?

A: Yes, The JVC KY-PZ200N NDI|HX PTZ Remote Camera does support the VISCA control protocol.

Q: 2. Does this camera have a remote control with presets out of the box?

A: The included remote has various functions that it can perform, but for accurate and complete control, you would need a proper, wired controller like the one illustrated here: https://bhpho.to/3849IdI

Q: 3. Are these camera weatherized in any way?

A: It is not weather sealed. However we should be able to identify an outdoor housing for it. If you would like assistance with that feel free to email us directly at askbh@bhphoto.com.

Q: 4. I know newer JVC cameras do both of these, but does this model support SRT streaming and SEI timecode?

A: No, the JVC KY-PZ100 Robotic PTZ Network Video Production Camera does not support SRT streaming or timecode pass-through. .

Q: 5. What other 3rd party controllers can these cameras use?

A: We only recommend using the following JVC controller with the JVC KY-PZ200N camera. When using off brand controllers JVC or the controller manufacturer will not help with support if you run into setup issues. JVC RM-LP100 Remote PTZ Camera Controller over IP BH #JVRMLP100 https://bhpho.to/3JuZOWE

Q: 6. Is there a web interface for controls and presets?

A: The JVC KY-PZ200N HD NDI|HX PTZ Remote Camera with 20x Optical Zoom offers web UI controls via the NDI protocol.

Q: 7. can you use a filter with this? and if so what is the ring size?

A: You would not be able to use a filter with the PTZ camera.

Q: 8. What is needed to attach this camera to a tripod?

A: The JVC KY-PZ200 HD PTZ Remote Camera with 20x Optical Zoom (Black) will not require any specific adapter to mount to a tripod, it can mount directly to a tripod as is a standard via 1/4"-20 tripod mounting screw.

Q: 9. re: NDI-will a device like Yolobox Ultra see this camera's output (i.e. ceiling mounted) or is other equipment needed?

A: Yes, The YoloLiv YoloBox Ultra All-in-One Multicamera Live Streaming and Switching System (BH #YOYBULT) can support NDI cameras like the JVC KY-PZ200N HD NDI|HX PTZ Remote Camera with 20x Optical Zoom via NDI.

Q: 10. For POE and control. What cable do you recommend? CAT6e Shielded? What is the power consumption?

A: When using POE+ the power consumption is 0.4 A. A shielded Cat6 cable will work great for installations. https://bhpho.to/2QGyurb

Wendy	04/09/2024
[100] We are thrilled with our purchase of the NewTek NDIHX-PTZ1 NDI PTZ Camera from B&H! B&H was wonderful to deal with - knowledgeable and helpful! The camera is easy to set up and use. Quality is exceptional! 5

Dave	21/08/2024
[50 dB] We use this in a church sanctuary to control three PTZ cameras. Previously, we had PTZ's IP SuperController, which was frankly, a pretty bad experience. We took a chance one this newer iteration and we love it. Solidly built, responds well, controls what we need and most importantly has not once had to reboot itself at the slightest static shock. 5

Dave	21/08/2024
[50 dB] We use this in a church sanctuary to control three PTZ cameras. Previously, we had PTZ's IP SuperController, which was frankly, a pretty bad experience. We took a chance one this newer iteration and we love it. Solidly built, responds well, controls what we need and most importantly has not once had to reboot itself at the slightest static shock. 5

Edward	18/08/2024
[PoE+ 802.3at] I use this controller for up to three PTZ 30x cameras, via PoE Ethernet. Nearly every feature of the camera is accessible through this controller. Besides pan, tilt and zoom, I regularly use manual exposure control, and up to 10 preset positions for each camera. A particularly nice feature is the ability to attach an HDMI monitor to view the currently selected camera via Ethernet RTSP. You set the speed one notch below that of your HDMI or SDI video. This is an essential feature when working with software (e.g., WireCast) or hardware (e.g., SlingStudio) which has a significant lag time. The monitor lag is only a few frames, which is easy to accommodate. I ultimately bought two Superjoy controllers, because I rely on it for nearly every job. 5

Edward	18/08/2024
[PoE+ 802.3at] I use this controller for up to three PTZ 30x cameras, via PoE Ethernet. Nearly every feature of the camera is accessible through this controller. Besides pan, tilt and zoom, I regularly use manual exposure control, and up to 10 preset positions for each camera. A particularly nice feature is the ability to attach an HDMI monitor to view the currently selected camera via Ethernet RTSP. You set the speed one notch below that of your HDMI or SDI video. This is an essential feature when working with software (e.g., WireCast) or hardware (e.g., SlingStudio) which has a significant lag time. The monitor lag is only a few frames, which is easy to accommodate. I ultimately bought two Superjoy controllers, because I rely on it for nearly every job. 5

frankie	09/08/2024
[30x] use it to control JVC KY-PZ100, silky smooth zoom, pan & tilt simultaneously. Found it can control other JVC cameras, I used it to control LS300, HM650, HM200, HM250 very happy! 5

Chris	02/08/2024
[30x] This camera is so smooth for the price point and great color out of the box, using it with b2bGear controller so easy to use. We have 4 in our flypack and more on the way. Also NDI works great on these 5

Joseph	22/07/2024
[50 dB] Open box. Plug in. Send invoice. It's that simple. Also supports more complex, more precise managed network environments. Compared to units costing half, has saved me about $1K worth of aggravation. No regerts. 5

Jim	16/07/2024
[12x] This camera is the best PTZ under $2000. The optical quality of this JVC unit is far and away superior to any others I looked at in this price range. It was also easy to network and I love the SRT streaming. 5