You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Fotodiox Wonderpana Freearc Core Unit Zeiss 15mm Lens

Fotodiox Wonderpana Freearc Core Unit Zeiss 15mm Lens
  • Product Code: eq66017
  • Availability: In Stock

$338.28 $443.15

This FotodioX WonderPana FreeArc Core Unit Zeiss 15mm Lensfrom FotodioX WonderPana FreeArc Core Unit Zeiss 15mm Lensis designed to specifically fit the Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens, as well as a separately available WonderPana 6.6" Holder Bracket. Those items can be combined to allow for the convenient use of two 2.5 to 4.0mm thick filters measuring 6.6" wide or one 2.5 to 4.0mm thick filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it. A compatible 145mm inner-pinch lens cap for 145mm FotodioX round filters is also provided.

The included WonderPana FreeArc Core Unit consists of two components, a front filter holder and a rear lens collar. Placement of this FreeArc Core Unit onto a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens is easily accomplished by sliding the rear lens collar over the rear of the lens until it has achieved a secure fit. Afterward, the front filter holder can be screwed onto the front of the installed rear lens collar.

To use the WonderPana 6.6" Holder Bracket with the FreeArc Core Unit for a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens, pretapped threaded inserts along the edge of the front filter holder accommodate the six included brass short screws for correct positioning of the WonderPana 6.6" Holder Bracket's two assembly pieces so that they are placed parallel to each other and can hold a 6.6" wide filter between them. Once the holder bracket and the front filter holder are combined and the separate collar has been slid over the rear of a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens, the front filter holder with the attached holder bracket can be screwed onto the installed rear lens collar.

After being fitted onto a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens, the bearing design of this WonderPana FreeArc Core Unit allows a WonderPana 6.6" Holder Bracket to be rotated 360°. This permits the use of graduated neutral density and other filters that are enhanced by varied positioning.

The FotodioX WonderPana 6.6" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter that is placed within one of the holder bracket's slots, its position can be secured using the included brass long screws. Pretapped threaded inserts along the outside of the holder bracket allow the long screws to each apply pressure to a spring-loaded retainer within each filter slot. When a pair of the long screws is used, the level of grip upon a rectangular filter can be varied, which can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

This FotodioX WonderPana FreeArc Core Unit includes front filter threads, which allow a FotodioX 145mm round filter to be used along with a WonderPana 6.6" Holder Bracket. If a 145m round filter is used on the attached WonderPana FreeArc Core Unit, the rectangular filter slot closest to the rear of the holder bracket becomes unavailable.

The FotodioX 145mm Center-Pinch Snap-On Lens Cap for Select WonderPana Systems and Filters is a 145mm front lens cap with a squeeze, spring, and snap-on mechanism. It is easy to install as well as remove and can attach to a WonderPana FreeArc filter holder system in order to protect the front element of a lens that any one of those systems is mounted on. Additionally, with the exception of the FotodioX Ultra Slim filters, this lens cap can be used to protect a FotodioX 145mm filter that is mounted on a FotodioX WonderPana FreeArc filter holder system.

Lens caps protect your lens or filter from scratches, fingerprints, and the elements when the lens or filter is not in use.

For Zeiss Distagon T* 15mm f/2.8    WonderPana FreeArc Core Unit    Use with WonderPana 6.6" Holder Bracket    With Bracket, Holds 6.6" Wide Filters    Bracket Rotates 360° with FreeArc    Holds up to Two 6.6" Wide Filters    Combine a 6.6" Wide and a 145mm Filter    145mm Center-Pinch Snap-On Lens Cap

Parameters
MaterialAluminum

  • Compatible with a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens
  • Accommodates a separately available WonderPana 6.6" Holder Bracket
  • With a WonderPana 6.6" Holder Bracket, allows for the convenient use of two filters measuring 6.6" wide or one filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it
  • Allows a WonderPana 6.6" Holder Bracket to be rotated 360° so that rectangular filters placed within it can be angled to the best position relative to the subject in front of the camera
  • Includes 145mm front filter threads, which allow a FotodioX 145mm round filter to be used along with a WonderPana 6.6" Holder Bracket
  • Constructed from aluminum alloy for durability while remaining lightweight
  • 145mm front lens cap with a squeeze, spring, and snap-on mechanism

Related Questions and Answers

Q: 1. Does the lens come with the filter ? It is not stated in the included items

A: Yes, the ZEISS Distagon T* 2.8/15 ZM lens ships with the center weighted filter included.

Q: 2. why does this lens need a Center Filter?

A: The center filter is meant to average the light distribution from the center of the lens to the frame edges to minimize vignetting - especially in areas of even density, such as blue sky, seamless backgrounds etc. The use of the center filter was more important in the pre-digital days, when post correction was more difficult.

Q: 3. Is the lens hood removable to allow graduated ND filters to be used without a space between the filter and the lens on the Zeiss 15mm Milvus?

A: The lens shade on the ZEISS Milvus 2.8/15 is removable, allowing use of gradated filters in front of the lens element.

Q: 4. What's the weight (not the package weight)?

A: The Bright Tangerine Morrissey 15mm LWS Lens Support Core (BH # BRB30101003) weighs in at about 4 oz.

Q: 5. Can the Zeiss Viewfinder ZI for Zeiss Ikon Camera When Used with 15mm ZM Lens be used with a Leica M-P (240) rangefinder camera?

A: Wrote to Zeiss about this 15mm viewfinder on a Leica M. Here is what they said: With the Zeiss Ikon rangefinder camera, as well as with the analogue and digital Leica M-mount rangefinder cameras, the hot shoe on top is always slightly off-centered (shifted to the right). This small amount of off-centering does not influence the horizontal parallax view with any attached super wide external viewfinder (e.g. our 15mm viewfinder). The amount of off-centering is so small relative to the horizontal field of view that it plays no role at all in practical use. So the viewfinder framelines in the 15mm only show the parallax markings for the small vertical shift between infinity and 0.7m closest focusing distance. So this viewfinder can be used on all M-mount cameras together with any 15mm lens without any problems."

Q: 6. Can this filter holder work with the Rokinon DSX 14mm cinema lens ?

A: No, the FotodioX WonderPana 145 Core Unit Kit for Rokinon/Samyang AF 14mm f/2.8 RF/FE does not fit the Rokinon DSX 14mm cinema lens.

Q: 7. Does this lens couple with Leica Rangefinder?

A: Yes this is Leica M-Mount Lens

Q: 8. Does this Filter Holder work with Rokinon DSX 14mm EF-Mount cinema lens?

A: No, the FotodioX WonderPana 145 Core Unit Kit for Rokinon/Samyang AF 14mm f/2.8 RF/FE does not fit onto the Rokinon DSX 14mm EF-Mount cinema lens.

Q: 9. Can I use a 77mn variable nd filter with this adaptor? I have tokina 16-18 mm

A: FotodioX WonderPana 145 Core Unit Kit for Tokina 16-28mm Lens is very wide. It accepts 145mm filters. Unfortunately 77mm filters won't work as they are too small.

Q: 10. Could you please test the vignetting of this lens (and 18mm as well) on Canon FF bodies with LEE SW150MKII screw-in adapter ring and filter holder attached?Basing on my experience with Canon EF 11-24 f/4 lens with the dedicated LEE SW150MKII system adapter for this lens and filter holder the minimum usable focal length was about 14 mm. I would like to go as wide as possible but without vignetting.

A: This filter system has not been checked by ZEISS for use on the Milvus 15 lens. You can refer to the compatibility chart on their website at: a href= http://www.leefilters.com/index.php/camera/system-match target= _blank http://www.leefilters.com/index.php/camera/system-match/a

15/08/2024

[Aluminum] Fits inside the Shimoda v2 35 backpack, has a zipped cover, and a handle should you want to pull it out of the backpack. Served me very well on long airline flights from California to Kenya, being unpacked and repacked many times, and it still is in great condition.

5
08/08/2024

[Aluminum] This is a great insert for those with an Action X30 backpack but have more gear than will fit the medium mirrorless core. I only wish this had come out a year ago when I purchased my X30.

5
01/08/2024

[Aluminum] Extremely versatile, fits my 500pf lens attached to my Z6ii camera. Also plenty of room for 2 additional small lens and cleaning accessories. Just an fyi, this insert DOES fit the Shimoda Designs Explore 40 backpack. (B&H rep told me it didnt). You simply need to remove the nylon carrying cover. Its snug but definitely doable. Only thing I wish it had was a larger holder on the strap for a smart phone.

5
16/07/2024

[Aluminum] Well protected and easy to handle, couldn't live without it.
You really see what the 15 mm lens sees.

5
14/06/2024

[Aluminum] I got this large core unit for my Shimoda Action X30 V2 backpack camera bag. I carry a Fujifilm X-T3 with a 100-400mm zoom and a 18-55mm zoom. Both Fujinon lenses. Also, I carry a Leica M10-Monochrom with a 35mm lens. There is room for items that I could not carry, but needed in the field, with my other backpack camera bag. The beauty here is you can empty your bag in one fell swoop by removing the Core Unit and switch it out with a different Core Unit fitted for a different type of shooting. The core units come with a fitted dust cover to keep your camera equipment clean while stored. The dust cover also substitutes as a packing bag for clothing if you need it. The partitions are easily move to customize for your equipment. It’s a very efficient enhancement to your pack pack camera bag. (The Add Photo feature was frozen, otherwise I’d have included a picture).

5
19/04/2024

[Aluminum] since f-stop stopped making their large shallow cubes, this is my go to for bags. allows me to convert my shimoda 30x or even F-Stop kashmir into a unit that can carry more gear. great build quality!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Headliner R2 2-channel Rotary Dj Mixer

$1,199.97 $1,439.96

Chandler Rs124 Tube Compressor Stepped I/o

$9,585.00 $12,748.05

Vocas Bp-19 Mkii Adjustable Balance Plate System

$2,707.74 $3,276.37

Apantac Da-sdi-de Sdi Audio De-embedder Device

$2,390.85 $3,275.46

Miller Cx6 Solo-q 75 Carbon Fiber 3-stage Tripod

$8,881.65 $13,766.56