The Flycam Flowline Master Vest for Camera Gimbalsfrom Flycam Flowline Master Vest for Camera Gimbalsis a body-worn vest support system that is adjustable to support camera rigs weighing 8.8 to 26.5 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso.

The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. The system consists of the vest, a support bar, an anti-slip ratchet knob, and a 17" top bar with a 5" support arm extension. The vest is adjustable for hip sizes from 32 to 49", and it is optimized for use with motorized gimbal stabilizers, providing increased lower back support that allows you to carry weights further away from your body. A carrying bag is also included for convenient storage and transport of the Flowline Master system.

Reduces Strain on Arms, Neck & Shoulders    8.8 to 26.5 lb Load Capacity    17" Top Bar with 5.5" Arm Extension    Adjustable Line Tension    Vest Fits Variety of Body Sizes    Carrying Case

• 8.8 to 26.5 lb load capacity
• Adjustable line tension for different cameras and configurations
• Lockable camera hook
• Anti-slip ratchet knob to adjust tension
• Line extends to 60" when fully stretched
• Adjustable vest and waist belt made of breathable fabric

Related Questions and Answers

Q: 1. If you pull down camera to get a lower shot, shouldn't the "string" go back up when releasing weight? Or is it setting height and that's where it is? I know the Swedish Easy Rig the string/cable will go up and down.

A: Yes, The FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation cord is tensioned and will retract, and adjust to the level of your camera payload. The cord will retract as you raise your camera payload.

Q: 2. is there a way to shorten the top bar so the cable comes down closer to the shoulder?

A: Yes, FLYCAM Flowline Master has an extension bar in front. You can remove the bar, thus shortening the top bar so the cable comes down closer to the shoulder. Here is a video link provided by Proaim https://bit.ly/3JVGAbj

Q: 3. difference with this https://www.bhphotovideo.com/c/product/1483097-REG/flycam_flcm_fln_mstr_flowline_master_stabilizing_body.html the arm is more short?

A: Yes, the major difference is that this item, the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) has a 13" (33cm) top bar with a 5" (12.7cm) extension whereas the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals (B&H# FLCMFLNMSTR) has a 17" (43cm) top bar with a 5.5" (14cm) extension.

Q: 4. Hello! My camera is a Blackmajick 6G2 , my cage for my camera is TILTA cage handle I want to buy this support bar and I would like to know if the can fit very well

A: Yes, the FLYCAM Flowline's lockable camera hook can attach to any handle and will fit on your setup.

Q: 5. Belt or waist size is about 34" inches minimum at stays in specs. My waist is about 31" inches. Would I be losing a tight fit?

A: Yes, The minimum waist size is 34" for the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals the fit would be very loose with your waist size.

Q: 6. Hi, I want to replace the clamp with a more solid option. Any recommendations?

A: We are not aware of any other "clamps" that would work with this product. These are especially designed to work fluidly and with the weight specifications defined. Any changes to that layout would alter the operation of the unit.

Q: 7. Is this the FLCM-FLN-MSTR-03 version ?

A: The Flowline Master 2 Professional Support Vest for Cameras & Gimbals, is MFR SKU: FLCM-FLN-MSTR-02. For FLCM-FLN-MSTR-03, please see the following link: https://bhpho.to/3yeh243

Q: 8. Is there an option for 30" inches or less of waist?

A: The FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) is only recommended for persons with a waist size of 34.3-55.9" (87-142cm). However, you may want to consider the FLYCAM Galaxy Arm and Vest Stabilizer (B&H# FLGLXYAV) as it can fit on waists 28-60" (71-152cm): https://bhpho.to/35eLb8w

Q: 9. Does it support RS 3 Pro with Blackmajick 6KG2 and TILTA cage ??

A: Yes, the FLYCAM Flowline Starter Support Vest and Spring Arm can support an RS3 Pro, Blackmagic 6KG2, and Tilta Cage.

Q: 10. Height Adjustment up and down

A: The line of the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will allow you to lower the payload you are working with to ground level. The line is tensioned and will retract.