Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. Is this enclosure compatible with the Samsung 960 PRO m.2 NVMe SSD?I heard some comments about b key, m key, so wasn't sure

A: Yes it is. The listed device uses M-key which is compatible.

Q: 2. Will this work in a Sonnet Echo Express III-D Thunderbolt 3 Expansion Chassis for PCIe Cards? If so, how would it perform (eg read/write speeds, raid configs)?

A: It is not yet on the list of Sonnet recommended cards. Sonnet does have their own supported: https://www.bhphotovideo.com/c/product/1565788-REG/sonnet_fus_ssd_4x4_e3s_m_2_4x4_pcie_3_0.html https://www.bhphotovideo.com/c/product/1565788-REG/sonnet_fus_ssd_4x4_e3s_m_2_4x4_pcie_3_0.html As far as others please see this link for further info: https://sonnettech.com/support/downloads/manuals/M2_compatibility.pdf

Q: 3. Would this work on a MacBook air after 2013 hard drive?

A: This device supports any M.2 drives with a SATA interface in the following sizes: Supports 30, 42, 60, and 80mm M.2 Drives . If your specific model of MacBook has a drive that falls under these categories, and is an operational drive, it will work.

Q: 4. Does this card support PCIe 4.0?

A: The ASUS Hyper M.2 x16 Card V2 can be used in a PCIe 4.0 slot.

Q: 5. Hello. Does anyone know if this is this compatible with the ASUS Z97-E/USB3.1 Motherboard?

A: Intel VROC Ready for X299/Z370/Z390 Series Motherboards. (Intel SSDs only.) AMD X399/X470/B450/X370/B350 Series Motherboards

Q: 6. Will this work with 2010 Mac Pro 5,1?

A: No, the ASUS Hyper M.2 x16 Card V2 BH #ASHYM216CRV2 does not work with a Mac Pro 5,1.

Q: 7. Does this card have support for Linux?

A: You would need to check the specific Linux distro your interested has support for the ASUS Hyper M.2 x16 Gen5 Card BH #ASHYM2X16G5C.

Q: 8. I have heard of bifurcation. I have an Asus z370-e board paired with an i7-8700. I have a graphics card in PCI slot 1 can I use this card with 4 SSDs loaded in it?

A: No, you would not be able to see all 4 SSD's using that setup. Only one would work. There are only so many PCIe lanes on the Z370 E with the i7 8700.

Q: 9. I see that someone asked if it will work on a ASUS Rampage IV Extreme Motherboard. But will it work if placed in the PCEi _x8_4 slot?

A: It will depend on the rest of your system configuration but for the best results and for all SSD drives to be recognized, you should use it on x16 slot. Article from Asus for reference: https://www.asus.com/support/FAQ/1037507#list

Q: 10. Does this provide hardware-based, bootable RAID support on non-HEDT platforms?

A: The HighPoint SSD7101A-1 M.2 NVMe RAID Controller bootable RAID support would be specific to the system it would be used on.