The Libec P1000 150mm Flat Base Pedestal Systemis a 2-stage pneumatic column pedestal system that supports up to 132 pounds (including fluid head) and features 31.9" of height adjustment, a steering ring, 150mm flat base for mounting either a Libec QH1 or QH3 fluid head, and a rolling dolly with removable cable guards.

The P1000 is equipped with a tracking locking mechanism that ensures straight-line movement by locking the caster direction as you move from position to position.The cable guards ride low over the wheels to prevent you from accidently rolling over cables when shifting positions on the studio floor. The cable guards can be raised up when needed to allow the dolly to roll over uneven surfaces. An included manual air pump allows you to charge the center column for proper operation, while an optional kick ring helps provide you a place to use your feet to help start smooth rolling movement of the pedestal.

Pneumatic Assist 2-Stage Center Column    31.9" Center Column Height Adjustment    132-Pound Load Capacity    150mm Flat Base with 4 x Tie-Down Holes    Works with QH1 or QH3 Head    Tracking Locking Wheel Mechanism    Removable Cable Guards    Air Pump Included

• The P1000 Pedestal can support 132 pounds of equipment, including video head, camera, and accessories
• Adjust the air pressure in the upper column to match the weight of the attached equipment; Libec refers to this as balancing the upper column, and it allows for easy height adjustment
• The pedestal features a Schrader valve (American valve) and can be pressurized using the included manual air pump or by external devices such as a compressor
• Generally, with 0.25MPa (2.5 bar / 36.3 psi) of air pressure, the pedestal can balance 22 pounds of weight
• The included adjustment weights allow you to fine-tune the balance on the upper column

Related Questions and Answers

Q: 1. Is there a recommendation for some good suction cups that I can use with such a tripod? (I got 3 cats, they like to play with everything, I don't want to see my camera on the ground ;)

A: I am sorry to say we do not have suction cups for tripods like this. Your best option would be to fold up and store the tripod when not in use.

Q: 2. What is the weight limit of the legs alone? If the head is removed could you mount a 25lb jib arm?

A: The manufacturer does not publicly list a weight capacity on these legs individually, but we would not recommend using these legs with a device that weighs 25lb.

Q: 3. Can I use this stand to mount a flash or an umbrella (assuming I add the umbrella attachment)?

A: The Impact Tabletop Light Stand with Flat Base has a weight load capacity of 10 lb. The umbrella will mount to the umbrella holder/cold shoe attachment. To be overly careful, you might want to consider a C-clamp to help secure the Impact Tabletop Light Stand with Flat Base to the desk.

Q: 4. Is the bottom of the 100mm half-bowl flat? I want to use it on a 75mm tripod so it remains fixed, and I can adjust the head with the legs? (better stability for putting a slider)

A: If you're using a tripod with a 75mm base, you're better off using a 75mm half-bowl since a 100mm half-bowl will not fit.

Q: 5. Is there a longer (telescopic) pan bar/pan handle available for this TH-X head?

A: We could not find a longer telescopic pan handle for this model.

Q: 6. What is the bottom thread for the tightener? I need an extension because it cannot reach the tightener on my benro 75mm bowl

A: it is a 3/8 -16

Q: 7. Does it come with the air pump?

A: The Libec P110(B) Pneumatic Pedestal with P110 Column and DL-8RB Dolly does not include an air pump.

Q: 8. what are the folded dimensions and weight of this tripod? It will be packed inside luggage. Thanks.

A: The Specs for the Libec TH-X Head and Tripod System are the following. Maximum Height 62.6" / 159 cm Minimum Height 29.7" / 75.4 cm Folded Length 29.7" / 5.4 cm I would suggest the Manfrotto Befree as a smaller packable tripod solution. which is about 15 inches when closed. https://bhpho.to/3LUKUXV

Q: 9. Can it be used on a Michael base occonor head on 150 mm bowel sachtler trpoid leg?

A: Yes, the Kupo Mitchell Base to 150mm Bowl Adapter from a Mitchell base to a bowl base.

Q: 10. Will a Sachtler FSB8 head with the standard long tie down fit this using a 100-75mm bowl adapter?

A: The standard long tiedown of the Sachtler FSB 8 MK II Fluid Head with Sideload Mechanism may not fit in the Libec P110(S) Pedestal System with P110 Column & DL-10RB Dolly. It would be recommended to use a head such as the Libec RHP85 Fluid Head with PH-8B Extendable Pan Handles, BH #LIRHP85, for best compatibility.