The Libec TH-Z S8 Fluid Head Tripod 33" Slider Kitis a compact dual-function tripod head with an 11 lb payload and fixed counterbalance and drag. It features a native 75mm half ball and has a flat base with a 3/8"-16 mounting thread on the bottom of the half ball. It's directly compatible with 75mm bowl tripods but can also be mounted directly on sliders and other supports via the flat base. A tie-down is included for securing it to tripods.

The head has a snap-in camera plate system that lets you attach the included camera plate from above rather than slide it in from the rear. The plate has a sliding range of 1.2" once secured. It comes with a 1/4"-20 mounting screw and an anti-twist video pin beside it. A long rosette-mount pan bar is included and an optional second one is also supported.

TH-Z H 75mm Half Ball/Flat Base Head    11 lb Payload    75mm Aluminum Tripod with Mid-Spreader    ALX S8 33" Slider with 75mm Half Ball    Tripod Carrying Case    Fixed Counterbalance and Drag    Snap-In Camera Plate System    23 to 58.5" Tripod Height Range    Integrated Mid-Level Spreader

• 11 lb payload

• 75mm half ball with a flat base and 3/8"-16 mounting thread

• Snap-in camera plate system

• 1/4"-20 mounting screw with a video pin

• Long pan bar (an optional second one is supported)

• Fixed counterbalance and drag

• Illuminated bubble level

Related Questions and Answers

Q: 1. Is there any way to purchase a secondary pan bar? Such as to use them both?

A: Hello, Yes, the second pan handle is part THXH-8 found here: a href= http://www.libec-global.com/s_parts/pdf/18-th-x/TH-X_H.pdf target= _blank http://www.libec-global.com/s_parts/pdf/18-th-x/TH-X_H.pdf/aPls contact the Libec office in Torrance, CA for this part at 310-787-9400, thanks.

Q: 2. Will this fluid head fit on the IFootage Cobra 3 pedal version?

A: Yes, the Libec TH-Z H Fluid Head will fit on the iFootage Cobra 3 Carbon Fiber Monopod with Pedal-Release Mini Tripod Base (BH #IFCB3C180FP).

Q: 3. Can this handle a Panasonic UX camcorder and small teleprompter?

A: That will depend on how much the teleprompter weighs. This tripod has a 17.5 load capacity. The UX cameras weigh around 4-5 pounds, you will have another 12 pounds or so for the teleprompter with this tripod.

Q: 4. Is this compatible with the Libec H70?

A: No this is NOT compatible with the H70

Q: 5. Where can I purchase just the fluid head?

A: Hello, unfortunately the TH-X head only is not sold separate at this moment. If you are looking for something similar, pls consider the ALX H Dual Base (75mm/flat base) fluid head here: https://a href= http://www.bhphotovideo.com/c/product/1148890-REG/libec_alx_h_head_with.html target= _blank www.bhphotovideo.com/c/product/1148890-REG/libec_alx_h_head_with.html/aIf you have questions, please contact the Libec office at 310-787-9400, thanks.

Q: 6. Will Libec TH-z Fluid Head fit ALX T legs?

A: Yes it will.

Q: 7. Will this head fit properly on the Miller solo DV Tripod ?

A: It is best to stick with heads/legs made by the same manufacturer to guarantee the best fit. Your combination will work as long as both the head and legs are 75mm ball compatible but a Miller head will typically have more range to level the head and lock down tighter on Miller legs than a Libec head (and same goes for a Miller head with Libec legs).

Q: 8. Hi does anyone tried this slider with the c500 ? would you recommend it for that camera?

A: I have been nothing but pleased with this rig with my EOS 7D and the C500 - the only trick is that the C500 is Heavy and would need an additional tripod at the end of the travel of the slide or it might tilt. Some use 2 ALX system tripods either end, but I just used mine with the ALX in the center with a static old lighting tripod screwed into one end ( 1/4 20thread holes on both ends ) Most efficient, compact and performance based excellence in my whole kit. Keep the Slider Rails Clean ( !!) and you'll be amazed at the heavy-duty fluid head for Very smooth moves. Practice and enjoy!

Q: 9. What is the weight limit of the legs alone? If the head is removed could you mount a 25lb jib arm?

A: The manufacturer does not publicly list a weight capacity on these legs individually, but we would not recommend using these legs with a device that weighs 25lb.

Q: 10. How much counterbalance does this head have?

A: Hello, The TH-X H Head has a fixed counterbalance for camera setups up to 9lbs/4kg. Thank you for your consideration.