Related Questions and Answers

Q: 1. Is this mount compatible with the smallhd 4k 13" monitor?

A: Yes, the E-Image VESA to 5/8" Baby Pin Adapter Female is compatible with the SmallHD Cine 13 UHD 4K High-Bright Monitor.

Q: 2. Can this be fixed on iOptron CEM26 side to mount guidescope?

A: Yes the Losmandy Dovetail Saddle Plate could be fixed to the iOptron. However, you would have to drill your own holes and the plate is flat. It will not follow the curved contour of the scope.

Q: 3. It appears square in the pic. Would that fit a 100x100 standard PC monitor? Also what is the center-to-center distance on the connection bolts? I have a mount I'd like to match it up with. Thanks!

A: This K&M 19615 Adapter Plate for VESA MIS-D 75 x 100mm Monitors (Black), would fit a 75 x 100 mm VESA mount. it was made to be compatible with the K&M 24471, 24481, and 24496 Mounts and the K&M 19780 and 19610 Stand Adapters. The center-to-center distance is not published.

Q: 4. Will this clamp to the Dovetail of a EdgeHD 1400?

A: The Losmandy Dovetail Saddle Plate for GM-8 & Takahashi Mounts BH #LOGM8SPDV • MFR #GM-8 SPDV is a receiver for standard large Losmandy D-series and the smaller V-series (Vixen-style) dovetail plate. It is designed to fit GM-8 and Takahashi equatorial mounts. Refer to the second picture on the B&H website. https://www.bhphotovideo.com/c/product/1279959-REG/losmandy_gm_8_spdv_gm_8_saddle_plate_for.html

Q: 5. Are there any products similar to this that will hold an iPhone in landscape mode as well as an iPad in portrait? I believe the range necessary for this would be at least 2.25 -9.5 and this product seems to *just* fall short.

A: I'm sorry. We don't carry a single device for such a large size range.

Q: 6. What are the bolt dimensions [bolt shaft diameter and bolt head diameter] for the two outside mounting bolt holes?

A: The Dimensions are 1/4-20 x 7/8 pass through.

Q: 7. Can this hold a 27" iMac?

A: The CTA Digital Height-Adjustable Rolling Medical Workstation Cart with VESA Plate will work with a 27" iMac if the iMac has the wall mount plate built in.

Q: 8. what is the weight capacity when used for a monitor on set? of course on a c stand....

A: Kupo states that the Kupo VESA Monitor Mounting Plate with 5/8- Baby Pin "...is designed for any monitor that comes with a VESA mounting 75mm x 75mm or 100mm x 100mm." We would recommend a payload of 22kg (48.5 lbs) or less, as comparable Kupo mounts suggest.

Q: 9. I don't see how to lock the tilt in the pictures. Is there a way to do this? Do you need a tool or by hand?

A: Yes. Tilt is all based on tension control which is adjusted by two Allen key screws at the bottom of the next of the tilt.

Q: 10. Can a finder mount screw ontu the underside of this mount? I want to undersling my guide camera which uses a finder mount.

A: We are not aware of the exact product you are looking to use with this, however it has holes for screws on both the top and bottom.