120Mm Touch N Go Qr System By Global Dynamics United

120mm Touch N Go Qr System By Global Dynamics United

Product Code: eq66355
Availability: In Stock

$1,503.00 $1,953.90

Qty

14 reviews Write a review

Description
Reviews (14)

The 120mm Touch N Go QR System by GLOBAL DYNAMICS UNITEDis well suited for use with large cinema and digital cinema cameras. It consists of a spring-loaded QR plate receiver and the QR plate. The receiver features a spring-loaded latching system to hold the plate securely and a safety catch to help prevent accidentally unlocking the plate. 29 x 3/8"-16 and 22 x 1/4"-20 threaded mounting holes on the bottom of the receiver provide a variety of mounting options.

The QR Plate features rubber pads on the top of the plate and includes two captive 3/8"-16 tie-down screws. One screw slides within an almost 2" long slot, allowing you to adjust the position of your camera on the plate. Four additional 3/8"-16 threaded screw holes are distributed around the plate, with an M4 threaded screw hole at the front. The anodized machined aluminum plate is wear and corrosion resistant, and it has grooves cut into the underside to reduce weight.

Touch N Go Receiver Spring-Loaded Locking System Release Safety Catch 29 x 3/8"-16 Threaded Mounting Holes 22 x 1/4"-20 Threaded Mounting Holes QR Plate 2 x 3/8"-16 Captive Tie-Down Screws M4 Threaded Mounting Hole Rubber Anti-Slip Pads Anodized Machined Aluminum

Receiver
Mounting Holes	29 x 3/8"-16 22 x 1/4"-20
Dimensions	6.75 x 3.63 x 0.63" / 17.15 x 9.21 x 1.59 cm
Weight	1.12 lb / 0.51 kg
Quick Release Plate
Material of Construction	Anodized Machined Aluminum
Dimensions	Plate: 3.13 x 3.31 x 0.31" / 7.94 x 8.41 x 0.79 cm Screw Slot: 1.625" / 4.14 mm
Weight	0.38 lb / 0.17 kg
Packaging Info
Package Weight	1.54 lb
Box Dimensions (LxWxH)	9.15 x 5.1 x 1.25"

The QR receiver features a spring-loaded latching system with a safety catch to help prevent the plate from accidentally being released.

Related Questions and Answers

Q: 1. Airplane safe?

A: Yes. The following unit is under 100wh and are carry-on safe as regulated by the TSA.

Q: 2. Can this support the Atomos Shogun 7?

A: The GLOBAL DYNAMICS UNITED Hinged KOMODO Monitor Mount is designed for SmallHD 5 and Portkeys BM5 monitors.

Q: 3. Is this plate compatible with any tripod plate systems?

A: The GLOBAL DYNAMICS UNITED 80mm QR Plate It is compatible with any Sachtler standard 80mm Touch and Go QR Systems.

Q: 4. Is this compatible with RED's DSMC2 Line?

A: No, this is only compatible with the RED Komodo.

Q: 5. Is this compatible with SmallHD 702 for komodo?

A: The Global dynamics model shows it works with 5" displays. However, yes it will work with the SmallHD 702. Another good choice is this SmallRig model. https://bhpho.to/3EhOJEd

Q: 6. Is this Compatible with the outrigger Handle?

A: Yes, in the description it clarifies that the KOMODO Monitor Mount can be used while the RED OUTRIGGER handle is attached to your camera.

Q: 7. Some reviews stated there is wiggle room with the cap on the port. Is this a common issue or has there been a fix? (BMPCC 6K Pro User)

A: Since many lens mounts can be manufactured to slightly different sizes there could be some wiggle on certain lens models when using the GLOBAL DYNAMICS UNITED Canon Lens Port Cap.

Q: 8. Does it fits under an 8Sinn Komodo Cage?

A: The GLOBAL DYNAMICS UNITED Quantum Baseplate for RED KOMODO is meant to be mount to the bottom of the camera itself.

Q: 9. Can I connect both the camera and the external monitor (blackmagic video assist 12G) to this battery? Does the battery provide isolated power to the D Tap?

A: Yes, But would suggest a battery with a high WH for longer run time.

Q: 10. Is there weight limit to this monitor?

A: GLOBAL DYNAMICS UNITED Hinged KOMODO Monitor Mount is design for SmallHD 5'' and PORTKEYS BM5WR 5.5" monitors . The load capacity of this bracket is approximately 1-1.5LB.

ian	08/09/2024
[1.54 lb] Works great with Komodo 5

ian	08/09/2024
[1.54 lb] Works great with Komodo 5

Alex	22/08/2024
[1.54 lb] After using Smallrig and Tilta hinges for the Atomos Ninja V on my FX3, I was pleasantly surprised as just how sturdy this little piece of metal is! It bolts on well, stays solid and allows you to tilt the monitor and keep it where you want it. hinge won't come loose like the others! 5

Ahmed	22/08/2024
[1.54 lb] I like the Firm factor it's Great. Well built 5

Dan	17/08/2024
[1.54 lb] Metal lens cap. Looks awesome. Turns easily. 5

Brent	01/08/2024
[1.54 lb] This is a very good mount that fits easily atop my Komodo. It rotates well and remains stable. 5

Elias	28/06/2024
[1.54 lb] Unique camera cap! Really solid and i like the red look it gives my camera! 5

Paul	24/06/2024
[1.54 lb] This is an item you buy for the cool factor. The stock cap that comes with the camera is sufficient but why stick with sufficient when you can have this rugged, good looking cap protecting your sensor? You'll be the envy of everyone on set when you pull out your camera body with this cover mounted. 5

Matteo	14/06/2024
[1.54 lb] Simple, effective and a great design/build quality from GDU. Wonderful first experience with B&H, Item delivered to Italy in just 3 days. 5 stars. 5