[14.505 lb] Upon my first look, I knew this was the underwater scooter of my dreams. So soon I will be able to test it out and give out my view on how it handles, However it would have been appreciated that either the hook up or flooter be included with the purchases. As having it as item not included and purchased seperately it a tad underwelming.


In general dont hesitate to plunge into buying this scooter.


Cheers and keep on scuba diving.


Louis

[18 to 25.2 VDC] Light weight and easy to use. I started using it with my Canon EOS10D and am still using it with the EOS 50D. With all other housings I would have had to buy a new one each time I changed the camera...

[164' / 50 m] Arrived very fast and as exactly as described

[6000 mAh] Super bright

[164' / 50 m] it's fast, it's awesome, it's perfect!

[8.2 lb / 3.7 kg] I went diving for the first time and bought this housing to take my Canon T3i underwater with me. I only dove 7 meters/21 feet, but it worked perfectly fine for me. No leaks or moisture inside at all and it fit my Canon 10-22mm EF-S lens perfectly. There was plenty of room for the flash too. I couldn't really change settings underwater while diving, although I could in the housing above water. I was hoping to switch to movie mode at some point, but wasn't able to. In reality, I don't think I would have been able to hold it straight in front of me steady enough while diving in order to do video anyway. That's probably just because I have no diving experience though. I set it to A+ (scene intelligent auto) mode for the underwater shots so I wouldn't have to change any manual settings. I had to let almost all of the air out in order to get it below the surface of the water, even with the lead weight in the case. Since it wasn't a deep dive, I didn't have any problems with the housing shrinking around the camera at all.I was able to take some photos that I'm really happy with underwater and even above water. The glass doesn't seem to blur the image at all EXCEPT for when you're above water and have water drops on the glass. I also used this case while kayaking in the rain and those shots are blurry.

[8.2 lb / 3.7 kg] I went diving for the first time and bought this housing to take my Canon T3i underwater with me. I only dove 7 meters/21 feet, but it worked perfectly fine for me. No leaks or moisture inside at all and it fit my Canon 10-22mm EF-S lens perfectly. There was plenty of room for the flash too. I couldn't really change settings underwater while diving, although I could in the housing above water. I was hoping to switch to movie mode at some point, but wasn't able to. In reality, I don't think I would have been able to hold it straight in front of me steady enough while diving in order to do video anyway. That's probably just because I have no diving experience though. I set it to A+ (scene intelligent auto) mode for the underwater shots so I wouldn't have to change any manual settings. I had to let almost all of the air out in order to get it below the surface of the water, even with the lead weight in the case. Since it wasn't a deep dive, I didn't have any problems with the housing shrinking around the camera at all.I was able to take some photos that I'm really happy with underwater and even above water. The glass doesn't seem to blur the image at all EXCEPT for when you're above water and have water drops on the glass. I also used this case while kayaking in the rain and those shots are blurry.

[18 to 25.2 VDC] This really is an amazing housing for the price. The first one I had I used I actually found in the basement at my parents house. It had been sitting there for 10+ years and I did a leak test, still worked, and I used it to do surf photography for the first time. It did eventually split open at the side, but I did catch it before going in the water. It lasted a good 6 months which was amazing because it was at least 10 years old. So I bought another one! I loved the second one for a long time and my mistake was leaving it in the car in the heat :-( It shrunk because it got too hot in my trunk, then when I put the camera in it, the housing was soft and the side split open. My fault here for sure. So I bought another one, hahahaha :-) Moral of the story here is to just continuously do water checks for your housing, it is soft housing so just be aware of not leaving it in your car for a day when you aren't using it, but this has been such an amazing an affordable option for me until I can buy a proper water housing. The only downside is it is too hard to change the settings once the camera is in the housing. So I use masking tape to keep my lens set at infinity, then I set my aperture and shutter speed depending on the light, sometimes auto if it's one of those days, and then just go for it! I have taken some amazing photos and love love love how much I've learned to get creative with my settings because of the restriction of being able to change it in the moment :-) It gets 5 stars because for a tenth of the price I get to create amazing photos and enjoy surf photography! I don't have to wait to spend 2500+ on a housing to do what I want :-) And as with any type of water housing, there is always a risk of ruining your camera. I already lost one camera to the sea :-) But the joy of ocean photography is so worth it so I'm willing to jump into the possibility of doing it again! I hope you enjoy yours as much as I enjoy mine!

[14.505 lb] it is a really powerful scooter , bring me swim like the olymipics champions, and the design is so cool , both me and my wife like it .

[14.505 lb] This is a really great housing. I have been using it for surf photography. The housings made for surf photography can run you a couple of thousand, minimum, so this one is an awesome way to get started! It's a bit tricky without being able to test the settings and the lens port requires some cropping in post when using wide angle lenses. Totally worth it though!