Incorporating CoreSWX's VoltBridge technology for wireless managing of your fleet of batteries, the Core SWX Helix 9 Mini 4-Battery Kit Gold Mount Chargeris capable of simultaneously charging four batteries at 3A each. This means that four 98Wh batteries can be charged in under 2.5 hours. The onboard LCD display screen allows you to easily monitor your battery's smart data without needing to connect to a computer. The micro-USB connector allows for firmware updates and for connection to a PC.

The built-in Battery Management Test mode allows the charger to determine battery health and recharge performance. Activating the SafeFly mode forces the charger to discharge or charge connected batteries to a 30% charge level to meet air travel and shipping requirements. While plugged into an AC power source, the charger can either charge batteries or be used as a camera power supply via the built-in 4-pin XLR. In the absence of AC power, you can use the charger to feed the 4-pin XLR from connected batteries providing unregulated power. The housing is made of aluminum, providing a robust build.

4 x 98Wh Li-Ion Gold Mount Batteries    Fleet Micro 3A 4-Position Charger    Simultaneously Charge 4 x Batteries    6.6A Continuous Draw at 14.8V    1 x 12V D-Tap Accessory Output    Charge 4 x 98Wh Packs in 2.5 Hours    LCD for Charging and Battery Status    VoltBridge Wireless Battery Management

• The charger incorporates VoltBridge technology which enables you to remotely view your attached batteries status via a mobile device app; the app also allows you to have the charger put your attached batteries into SafeFly mode
• Accessing the chargers control panel provides the same management capabilities as the VoltBridge app, without the same convenience
• Four independent Gold mount charge bays
• Simultaneous charging
• Approximately 2.5-hour charge time for four 98Wh batteries
• When SafeFly mode is activated, the charger will either discharge your battery down to 30% of capacity or charge it up to 30%, depending on the charge state of the battery
• 90 to 240 VAC worldwide compatible input voltage
• Compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX
• The four-line LCD display screen enables monitoring battery information from the charger
• Hypercine mode allows you to mount up to four batteries to provide unregulated 12 to 16.8 VDC from the charger's 4-pin XLR, without connecting to an AC power supply
• In Hypercine mode, the charger's LCD reports back available capacity as well as remaining runtime
• Aluminum build
• Weighs 5 pounds
• An optional "Hypercine Module" (not included) enables the charger to provide both unregulated 12 to 16.8 VDC and regulated 28 VDC via a 3-pin XLR output

Related Questions and Answers

Q: 1. Can this charge anton Bauer titon micro 90WH battery?

A: Yes it can however, we recommend using Anton Bauer chargers with Anton Bauer batteries for the most reliable consistent results.

Q: 2. Can these charge Duo-c98 batteries?

A: Yes, The Core SWX GPM-X2S Mini Dual Travel Battery Charger (V-Mount) would be able to charge other brands of V-Mount batteries.

Q: 3. Hi! Is this product adapted for European plug? Can I use it in France?

A: The Core SWX GPM-X2S Mini Dual Travel battery charger cord included is for the USA. But you could work with a simple plug converter to adapt from USA to your countries plug type. The charger will accept 100-240v power so it can work anywhere in the world.

Q: 4. How long does it take to fully charge with various charger options?

A: Charge 2 x 98Wh Packs in 2.5 Hours

Q: 5. Are these batteries compatible with the C500 Mark II?

A: Yes. But the following unit will need to be D-tapped Wooden Camera D-Tap to Canon C100, C100 Mk II, C300 & C500 Power Cable (20") BH #WO249600 • MFR #249600 https://bhpho.to/3P6DGRS

Q: 6. How long can it power aputure 600D light?

A: The approximate runtime of the Core SWX Helix Max 98Wh Lithium-Ion Dual-Voltage Battery (B-Mount) on the Aputure LS 600d Daylight LED Monolight (V-Mount) will be 1h 30 min when 2 batteries are used at the same time.

Q: 7. Whats the output on the Ptap? For example can my smallHD 7" or my taradek run off the Ptap? Or do I need a downconverter to 12V?

A: You will not need a regulator when using the 12V P-TAP/D-TAP output on the Core SWX Helix Max 275. You, will be able to power your display, and Teradek transmitter from the batteries D-TAP output.

Q: 8. Will this charger work with AB Hytron batteries?

A: no this will not charge HYtron batteries

Q: 9. Will this work with the Alexa Classic?

A: Yes, you can mount and power the ARRI Alexa Classic with the Core SWX Helix Gold Mount to ARRI LF and ALEXA Battery Mount Plate.

Q: 10. Does this work with any gold mount battery?

A: You can use any gold mount battery. The plate provides 11 to 34 VDC input and output, and up to 33.6 VDC when using Helix battery packs.