Fotodiox Wonderpana Freearc Core Unit Tamron 15-30Mm Lenses

Fotodiox Wonderpana Freearc Core Unit Tamron 15-30mm Lenses

Product Code: eq66802
Availability: In Stock

$374.85 $479.81

Qty

7 reviews Write a review

Description
Reviews (7)

This FotodioX WonderPana FreeArc Core Unit Tamron 15-30mm Lensesfrom FotodioX WonderPana FreeArc Core Unit Tamron 15-30mm Lensesis designed to specifically fit the Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD lens, or a Tamron SP 15-30mm f/2.8 Di VC USD G2 lens, as well as a separately available WonderPana 6.6" Holder Bracket. Those items can be combined to allow for the convenient use of two 2.5 to 4.0mm thick filters measuring 6.6" wide or one 2.5 to 4.0mm thick filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it. A compatible 145mm inner-pinch lens cap for 145mm FotodioX round filters is also provided.

The included WonderPana FreeArc Core Unit consists of two components, a front filter holder and a rear lens collar. Placement of this FreeArc Core Unit onto a Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD lens, or a Tamron SP 15-30mm f/2.8 Di VC USD G2 lens is easily accomplished by sliding the rear lens collar over the rear of the lens until it has achieved a secure fit. Afterward, the front filter holder can be screwed onto the front of the installed rear lens collar.

To use the WonderPana 6.6" Holder Bracket with the FreeArc Core Unit for a Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD lens, or a Tamron SP 15-30mm f/2.8 Di VC USD G2 lens, pretapped threaded inserts along the edge of the front filter holder accommodate the six included brass short-screws for correct positioning of the WonderPana 6.6" Holder Bracket's two assembly pieces so that they are placed parallel to each other and can hold a 6.6" wide filter between them. Once the holder bracket and the front filter holder are combined and the separate collar has been slid over the rear of a Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD lens, or a Tamron SP 15-30mm f/2.8 Di VC USD G2 lens, the front filter holder with the attached holder bracket can be screwed onto the installed rear lens collar.

After being fitted onto a Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD lens, or a Tamron SP 15-30mm f/2.8 Di VC USD G2 lens, the bearing design of this WonderPana FreeArc Core Unit allows a WonderPana 6.6" Holder Bracket to be rotated 360°. This permits the use of graduated neutral density and other filters that are enhanced by varied positioning.

The FotodioX WonderPana 6.6" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter that is placed within one of the holder bracket's slots, its position can be secured using the included brass long screws. Pretapped threaded inserts along the outside of the holder bracket allow the long screws to each apply pressure to a spring-loaded retainer within each filter slot. When a pair of the long screws is used, the level of grip upon a rectangular filter can be varied, which can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

This FotodioX WonderPana FreeArc Core Unit includes front filter threads, which allow a FotodioX 145mm round filter to be used along with a WonderPana 6.6" Holder Bracket. If a 145m round filter is used on the attached WonderPana FreeArc Core Unit, the rectangular filter slot closest to the rear of the holder bracket becomes unavailable.

The FotodioX 145mm Center-Pinch Snap-On Lens Cap for Select WonderPana Systems and Filters is a 145mm front lens cap with a squeeze, spring, and snap-on mechanism. It is easy to install as well as remove and can attach to a WonderPana FreeArc filter holder system in order to protect the front element of a lens that any one of those systems is mounted on. Additionally, with the exception of the FotodioX Ultra Slim filters, this lens cap can be used to protect a FotodioX 145mm filter that is mounted on a FotodioX WonderPana FreeArc filter holder system.

Lens caps protect your lens or filter from scratches, fingerprints, and the elements when the lens or filter is not in use.

For 15-30mm Di VC USD/USD G2 or Di USD WonderPana FreeArc Core Unit Use with WonderPana 6.6" Holder Bracket With Bracket, Holds 6.6" Wide Filters Bracket Rotates 360° with FreeArc Holds up to Two 6.6" Wide Filters Combine a 6.6" Wide and a 145mm Filter 145mm Center-Pinch Snap-On Lens Cap

Parameters
Material	Aluminum
Packaging Info
Package Weight	1.035 lb
Box Dimensions (LxWxH)	7.6 x 6.8 x 2.9"

Compatible with a Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD lens, or a Tamron SP 15-30mm f/2.8 Di VC USD G2 lens
Accommodates a separately available WonderPana 6.6" Holder Bracket
With a WonderPana 6.6" Holder Bracket, allows for the convenient use of two filters measuring 6.6" wide or one filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it
Allows a WonderPana 6.6" Holder Bracket to be rotated 360° so that rectangular filters placed within it can be angled to the best position relative to the subject in front of the camera
Includes 145mm front filter threads, which allow a FotodioX 145mm round filter to be used along with a WonderPana 6.6" Holder Bracket
Constructed from aluminum alloy for durability while remaining lightweight
145mm front lens cap with a squeeze, spring, and snap-on mechanism

Related Questions and Answers

Q: 1. Does this lens have an internal zoom or does it extend externally?

A: This lens has internal zoom.

Q: 2. Are there any recommended ND filters for this lens? I'm using it on my Panasonic Gh5s with the metabones speedbooster.

A: Since the Tamron has a rear gel filter holder, perhaps the new Haida Rear Lens ND Filter Kit for Tamron SP 15-30mm f/2.8 Di VC USD Lens (https://bhpho.to/2XxAC8O)

Q: 3. This adapter can you with Nisi S5 Sony 12-24 ?

A: This ring is not compatible with the 12-24.

Q: 4. will this work on Nikon 70-200 2.8 lens?

A: No, for Nikon 70-200mm f2.8 you will need this BH #NIADSFT77105

Q: 5. What is the difference between this lens with a G2 designation and the same lens without the G2?

A: To the MORON that answered "read the spec"! Michael asked his question because the spec does not spell out the difference. If you don't read the description for the product, then don't post here. People only ask legitimate because the answers were not provided in the description. Why would you pay hundreds more for a lens that is not any different from it's predecessor? Stop being hateful! We are supposed to be her to help.

Q: 6. What size circular polarizer fits this holder?

A: The Benro Master Series 150mm SD CPL-HD ULCA WMC Filter, B&H# BECP150 would be the proper circular polarizer for this filter system. https://bhpho.to/34RyGKg

Q: 7. Is it compatible with 5D Mark IV?

A: Yes , it Is compatible with 5D Mark IV

Q: 8. Does this ring work with the older 150mm NiSi filter holder for the Tamron 15-30mm lens (BH product #NIFH150TAM)?

A: Yes it is compatible.

Q: 9. Is this holder can fit the Breakthrough photography 1500 mm GND and ND filters?

A: The Benro Master Series 150mm Filter Holder for Tamron SP 15-30mm f/2.8 Lens has three slots which supports 150mm wide filters up to 2mm thick. According to Breakthrough Photography, the Breakthrough Photography X4 150x170mm GND Filters they carry are 2mm thick. As such, yes, they would be compatible for use with the Benro Master Series 150mm Filter Holder.

Q: 10. Does this adapter work with other S5 filter holders? I have the S5 for the Fuji xf8-16 and would like to use it on my other lenses with 77mm filter threads.

A: Yes, this adapter will work on the Nisi S5 Holder for the Fuji XF 81-6mm lens.

Larry	03/09/2024
[1.035 lb] I’m using this lens for the first trip to Austin TX. The colors just pop with this lens and I’m very impressed with the sharpness so far. I have noticed a little lens flare when the conditions are right but I’m not too worried about that. 5

james	26/08/2024
[1.035 lb] This system works so good, that aside from it being on the lens, you forget it's on the lens, despite it's size. when looking through the view finder, it is so clean that you don't think it's on . The polarizing is amazing. the best out of a mountain of filters and polarizers I've tried. the clouds are UNBELIEVABLE . 5

David	27/06/2024
[1.035 lb] Excellent filters but really big. But then I knew that would be the case when I ordered them. 5

Raymond	24/06/2024
[1.035 lb] Loving my new glass 5

Guttorm	16/06/2024
[1.035 lb] This thing is excellent, just beware of the small brass screws on the filter ring.They are not firmly tightened.I took them out and used some Locktite on the threads so they want be loose any more.And sadly ,the filter pouch is to small for the holder with filter mounted. 5

Mitsos	09/05/2024
[1.035 lb] Many outdoor shots and therefore glare, reflections etc very helpful. 5

Nicholas	23/04/2024
[1.035 lb] This thing is phenomenal. Little to no vignetting or chromatic aberrations at any zoom or aperture. Crystal clear images, tack sharp across the board, awesome, fast focusing, and delightful vibration compensation. If you're on the fence, just do it. You won't regret it. 5