Quickly adapt your Mitchell platform to a 150mm bowl with the Proaim Mitchell Base 150mm Bowl Adapterfrom Proaim. CNC-machined from aluminum and anodized for wear and corrosion resistance, this adapter is lightweight yet durable, and it's fast to install and remove. It features a removable key for indexing on your Mitchell plate and to help prevent the adapter from spinning once your fluid head is mounted. An included washer works as a spacer and keeps your fluid head's tie-down knuckle from slipping through the adapter's inner hole.

CNC-Machined Aluminum    Mitchell Base with Removable Key    Tie-Down Washer Included

The locating key is removable, allowing you to use it on a Mitchell plate that has a deformed keyway slot.

The tie-down knuckle for some fluid heads may have a smaller diameter than the inner hole in Mitchell plates, and the threaded tie-down shaft may be too long, preventing you from properly tightening the head on your Mitchel mounting plate. The included washer spans the inner hole in your Mitchell plate, providing a contact surface to tighten the head against. The washer also helps fill the height difference so you can tighten your head on the adapter.

Related Questions and Answers

Q: 1. Is this tripod compatible with the Vinten V3996-0001 Vector 950 Pan/Tilt Head?

A: Yes. Both the tripod and the Vinten V3996-0001 Vector 950 head will support the Mitchell flat base mount.

Q: 2. Can the mid-level spreaders be removed?

A: Yes.

Q: 3. I have a benro BV10 (100mm). Will this be able to work? I have a Dana dolly 100mm Mitchell mount adapter.

A: When using the Proaim Mitchell-Base Tilt Wedge we can only recommend using the ProAim 100-150mm adapters that would allow you to work with your Benro 100mm head. Proaim Mitchell Base to 100mm Bowl Adapter BH #PRBP30200 https://bhpho.to/42uWySl

Q: 4. I understand this to accept a mitchell head on one end. Can the other end accept a 100mm half bowl mount? My sticks have provision for 100mm bowl, and I'd like to use this with my current setup.

A: There are no available100mm bowl to Mitchell adapters. The Proaim Mitchell-Base Tilt Wedge requires a Mitchell mount to meet its weight rating.

Q: 5. Does this work with the Proaim Heavy-Duty Portable Tripod Dolly?

A: The dolly only works with tripods with dual-spiked feet.

Q: 6. is the minimum height with the spreader open or closed?

A: The Proaim Heavy-Duty Mitchell Base Tripod Legs with Mid-Level & Ground Spreaders (Silver) has a minimum height of 2.9 feet when open and a closed height of 3.2 feet.

Q: 7. Will this tripod work with a Sachtler Video18 head? Proaim 100 mm bowl tripod..

A: Yes, the Sachtler Video 18 S2 Fluid Head with its 100mm bowl mount would be compatible with the 100mm bowl of the Proaim 100mm Bowl Tripod Stand.

Q: 8. Does this work with the Proaim Alphabet 21' Jib/Crane Arm?

A: Yes, the Proaim Alphabet 21' Jib/Crane Arm works with the Proaim Gravity Heavy-Duty Tripod (Flat Base).

Q: 9. Would I be able to adapt a 100mm ball head by using this product? Proaim Mitchell Base to 100mm Bowl Adapter BH #PRBP30200 MFR #BP-302-00

A: Proaim Mitchell Base to 100mm Bowl Adapter can be used on the Proaim Heavy-Duty Mitchell Base Tripod Legs with Mid-Level & Ground Spreaders.

Q: 10. Will this take a Vinten 70 Head?

A: This tripod has a Mitchell mount. The Vinten Vector 70 head has the Four-bolt flat Vinten mount. You will need this adapter to use that head with these legs: B&H# VI31033 (https://www.bhphotovideo.com/c/product/97041-REG/Vinten_3103_3_3103_3_Mitchell_4_Bolt_Flat.html/specs)